Quoted from dgAmpGuy:I had a jungle queen machine that was in storage for a long time before I got it. I had to remove the entire insert and glass as one big sandwich before I could separate the two. Since I had bought it as a parts machine, and mainly because the glass was better than our current machine, it was nerve wracking to say the least. Those rubber pads turn to goo over the years.
Good luck,
Dave
Yea, remove the 4 L brackets (top two will be tough) and swing arm and hinges. then set up a couple of gallon paint cans on a table and set the head glass down on the cans. the glass will be supported by the glass and the frame drops down to the table. May need to to manhandle this.