Theatre of Magic
Bally, 1995You're currently viewing posts by Pinsider Pin_Guy.
Click here to go back to viewing the entire thread.
Quoted from harryhoudini:I am going to attempt to repair. I'll pull one and grab the chip and pot and reflow the connectors as those sound like the common issues. I'll let you know if I don't get any success there.
Just curios, have you tried swapping the 2 drain sensor boards to see it the problem follows the board?
Oh I found my Eddy sensor parts over the weekend, the potentiometer I use is an exact replacement for the original ... unfortunately these are on back order.
Quoted from DumbAss:Repairing your board is going to be cheaper than replacing it. It may require a little bit of leg work to find components, patience waiting for the components and appropriate equipment to perform the repair.
With the exception of U1, this should be the full parts list from the last time I ordered eddy board parts: https://docs.google.com/spreadsheets/d/1JldkcrDKpzEhbf9p7weN8CUWl0OMJfuhk6k87WlfqQM/edit?usp=sharing
Quantities and prices listed are current bulk prices, reducing quantities may increase prices or make the part unavailable at lower quantities.
You're currently viewing posts by Pinsider Pin_Guy.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/repair-advice-for-b-w-eddy-boards-specifically-tom?tu=Pin_Guy and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Sandy Springs, GA