You're currently viewing posts by Pinsider Pin_Guy.
Click here to go back to viewing the entire thread.
The small backbox power harness (shown in picture) would become merged with the playfield harness, only you can answer if it would be undesirable to you. Ralistically, the only person that wouldn't like this is the guy doing a complete restoration on the machine; it would also cause a little more work if you need to remove the head from the machine for any reason.
Quoted from KornFreak28:So is it just a matter of soldering the wires together to eliminate it?
You can also just put a molex male and female connector in its place ... depending on the game and whichever is easier.
See post #2 for potential consequences of soldering these together.
You're currently viewing posts by Pinsider Pin_Guy.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/removing-wpc-z-connector-any-negatives?tu=Pin_Guy and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
