You're currently viewing posts by Pinsider rca1.
Click here to go back to viewing the entire thread.
Quoted from TinyToo:The wiring harness for the lights and displays is soldered onto the backboxes in quite a few places
There SHOULD be connectors at the wire ends that push onto the circuit board connectors. Someone may have removed the connectors from the wires and soldered the wires directly to the boards. If that's been done, removing the head is a different degree of difficulty.
You're currently viewing posts by Pinsider rca1.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/removing-bally-backbox-any-advice?tu=rca1 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
St Joseph, MI