Goldeneye
Sega, 1996The I/O Power Board (520-5137-00) on my Goldeneye has a dead red LED (the +12V indicator) and I would like to change it. The part number for this T1-3/4 Diffuser LED is 165-5099-00 but details on the voltage are not explicit on the schematics. At my local electronics store, there is a voltage associated to the LED so I was wondering which one I should buy. They have 1.5V, 2V, 5V and 12V.
Thanks for your help!
Quoted from pbjack:The I/O Power Board (520-5137-00) on my Goldeneye has a dead red LED (the +12V indicator) and I would like to change it. The part number for this T1-3/4 Diffuser LED is 165-5099-00 but details on the voltage are not explicit on the schematics. At my local electronics store, there is a voltage associated to the LED so I was wondering which one I should buy. They have 1.5V, 2V, 5V and 12V.
Thanks for your help!
It looks like all the LEDs on the I/O power board are referenced as the same part in the parts list, so should be a 5VDC LED.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/red-light-emitting-diode-on-sega-io-power-board-what-voltage and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Montréal, QC
Mobile, AL