Did anyone actually tried a TiltAudio on a WPC95 ?
I didn't find any report on the web, I only found a "duplicator" cable on the official shop of TiltAudio.
steve45 gave me answer on the chat (thanks for that !), but I'd rather ask my questions here if anyone else is interested.
Latest board version v3.7 (available on oshwlab under the name of "tiltaudio-3.6") as two WPC connectors which is convenient because Audio and Video are on the same board and we can't simply replace the audio board as for WPC.
We can now use a standard cable instead of the "duplicator" cable, less convenient, needed by the previous version of the board.
I'm wondering about power supply as J501 doesn't exist on my WPC95.
We need an alternative current (at least 10VAC) to get our 12VDC/5VDC via the Diode Bridge and the DC-DC step down converters.
On my WPC95 we have two connectors J130/J131 which, according to schematics, are not used but connected to J128 and its 16VAC.
But those two are used for flasher and solenoids, and I don't know if it's a good idea for powering audio.
And I'm wondering what will happen when we open the coin door ... I'am not sure power will still be available...
We can also make a derivation of J129 and its 13VAC or use directly the 18VDC of TIP102 on DC-DC converter.
20220102224622-Sebinouse-28F808E6-D074-48AA-BDCC-C0BFA18607DB (resized).jpeg
Let me know if you have a better idea ...
Next question is about the location of the board : where do you put it ? Because it seems pretty big (form factor of the WPC board) and i don't see any obvious place for it !
20220102232634-Sebinouse-FD802F28-3EEC-4661-9A38-5A35D35F80E4 (resized).jpeg
Last question (for today) is about the Pin2DMD connector. I've a Nucleo V4 shied that is powered with 5VDC and I'm wondering why the 4 PINs Pin2DMD connector doesn't get it and why only one pin is used (for 12VDC) and the others grounded. Is it reserved for future developement (PPUC?) or can we get a 5VDC pin on it ?