Photo: robin
  1. » Forum
  2. » Parts, Mods and Add-ons
  3. » All modding!
  4. » Rebuilding sound for DataEast & WPC using a pi
(Topic ID: 179619)

Rebuilding sound for DataEast & WPC using a pi

By steve45

7 years ago


Topic Heartbeat

Topic Stats

  • 2,042 posts
  • 124 Pinsiders participating
  • Latest reply 37 days ago by Ashram56
  • Topic is favorited by 144 Pinsiders

You

Linked Games

There are more than 8 games linked to this topic.
Click here to show all linked games

Topic Gallery

View topic image gallery

20230816_111929 (resized).jpg
20230816_111238 (resized).jpg
20230816_111216 (resized).jpg
20230816_111301 (resized).jpg
IMG_6421 (resized).jpg
IMG_6420 (resized).jpg
2023-03-27_18-06-16 (resized).png
IMG_8790 (resized).JPG
rev-3.8-board (resized).jpg
C7BECF85-6A35-49A4-9C0C-611A6E059682 (resized).png
49C01E99-89EB-40E0-8790-5284A9D5CE12 (resized).jpeg
8B5C3740-485C-4518-B3F8-75DECB3FE0F2 (resized).jpeg
F484B39F-E731-4EA6-AF15-EDA85E40774D (resized).jpeg
6A8ECF6B-5C7C-4DB0-9B57-78787F299920 (resized).jpeg
224F7226-27C1-4E5B-8240-13940876411D (resized).jpeg
IMG_9634 (resized).JPG

You're currently viewing posts by Pinsider rensh.
Click here to go back to viewing the entire thread.

0
0
0
#41 6 years ago
 
RHO

Rensh

Pinside+ Frequent

11y 136K 4,134 5 22

Gonna give this a try in my JP

Kit is ordered, SD card already prepped and look forward to receiving it and trying it out. Hopefully somewhere next week

3 weeks later
0
0
0
#45 6 years ago
 
RHO

Rensh

Pinside+ Frequent

11y 136K 4,134 5 22

Quoted from BENETNATH:

Hi,
Some question :
- Any luck for stern, as they basically are updated DE ? My LOTR would be happy!
- Pi zero or Pi3, any difference at the end ?
- Booting time wise, what's the best setup and Linux distrib ? What is the current timing to have sound on cold boot ?
- did you explain somewhere the relay for a shaker ? I would like to have my tommy linked not only to propellers, but also to some sounds.
- Would it be possible to add 3 channels for additional toy triggering, like the shaker? That we could call based on sound ? A chimebox in the tommy would be easy that way.
Thanks

As far as I know from German forum

1) Stern lot more difficult as there is not a separate soundboard. A kind of adapter would be needed to grasp the signals from the cpu. Pinsound has one for Whitestar
2) I am running a raspberry zero which does the job just fine. Guess a pi3 would just be faster in booting? My cold boot time is 35 seconds (no preloading).
3 and 4) for Steve to answer.

2 weeks later
0
0
0
#53 6 years ago
 
RHO

Rensh

Pinside+ Frequent

11y 136K 4,134 5 22

Quoted from Andyj965:

Hi Steve,
Would it be possible to use this and share the PSU for the Pin2DMD? Also i assume a pi2 would be sufficient if i purchased a v1.9 kit?
Thanks,
Andy

I am using the same PSU to drive pin2dmd and raspisound. Think it’s a 5A psu by the way.

Must also mention I am struggling to get it properly working. Waiting for a fix allowing to adjust the power levels of callouts vs music and a proper working volumebutton. This as should be possible. Am using a pi zero by the way. Volume is thus not working properly with me and waiting for a solution from Steve.

1 year later
0
1
1
#859 4 years ago
 
RHO

Rensh

Pinside+ Frequent

11y 136K 4,134 5 22

Finished building the board but unfortunately no GO

I see leds go on. I see the raspberry green and red leds start to flicker but no go. Should I not at least hear the version number coming from the speakers? Or do I need to set something in the config parameters ? Looking in the (attached) logfile I see that the PI is running at least. If I put my finger on the inputs of the amplifier I can hear this in the speakers so they are getting a voltage t. tried connecting an earset to the socket on the DAC module, nothing to be heard. Also I n otice the displayh is not shwoing anything. I do only hear some crack sounds, especially when the green led is on.

Am updated to rel 1.28. Am using the soundset you sent me but am gusessing its not a oundset issue as otherwise I would have heard at laest the version number of the software.

Any thoughts?

Oh, 1 thing perhaps worth mentioning. I soldered the GIO 40 pin header down to the board to find out later this means the pins of the PI dont go in 100%, perhaps like 90%.

Hope somebody can give me a hint for next step. Thanks.

2019-05-11 13:41:53.898 INFO RasPiSnd [main] [despi.c:753] TILT!Audio starting, version 1.28, serial: 3182025625, on: Raspberry Pi Model B Plus Rev 1.2
2019-05-11 13:41:54.826 INFO RasPiSnd [verifyKey] [crypt.c:218] trying to load key from 3182025625.key
2019-05-11 13:41:54.826 ERROR RasPiSnd [readFromFile] [crypt.c:78] could not read 3182025625.key
2019-05-11 13:41:55.057 INFO RasPiSnd [dumpEnvironment] [despi.c:614] Dumping process environment
2019-05-11 13:41:55.057 INFO RasPiSnd [dumpEnvironment] [despi.c:616] LD_LIBRARY_PATH=/home/pi/despi
2019-05-11 13:41:55.057 INFO RasPiSnd [dumpEnvironment] [despi.c:616] LANG=en_GB.UTF-8
2019-05-11 13:41:55.057 INFO RasPiSnd [dumpEnvironment] [despi.c:616] INVOCATION_ID=babdf651676c4540a01620a337e2e40d
2019-05-11 13:41:55.057 INFO RasPiSnd [dumpEnvironment] [despi.c:616] USER=root
2019-05-11 13:41:55.057 INFO RasPiSnd [dumpEnvironment] [despi.c:616] PWD=/home/pi/despi
2019-05-11 13:41:55.057 INFO RasPiSnd [dumpEnvironment] [despi.c:616] HOME=/root
2019-05-11 13:41:55.057 INFO RasPiSnd [dumpEnvironment] [despi.c:616] LC_CTYPE=en_GB.UTF-8
2019-05-11 13:41:55.058 INFO RasPiSnd [dumpEnvironment] [despi.c:616] JOURNAL_STREAM=8:8674
2019-05-11 13:41:55.058 INFO RasPiSnd [dumpEnvironment] [despi.c:616] SHLVL=1
2019-05-11 13:41:55.058 INFO RasPiSnd [dumpEnvironment] [despi.c:616] PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
2019-05-11 13:41:55.058 INFO RasPiSnd [dumpEnvironment] [despi.c:616] LC_TIME=en_GB.UTF-8
2019-05-11 13:41:55.058 INFO RasPiSnd [dumpEnvironment] [despi.c:616] =/home/pi/despi/despi2
2019-05-11 13:41:55.058 INFO RasPiSnd [dumpEnvironment] [despi.c:616] OLDPWD=/
2019-05-11 13:41:55.058 INFO RasPiSnd [main] [despi.c:780] loading settings from ta.ini
2019-05-11 13:41:55.058 DEBUG RasPiSnd [readConfig] [fileutil.c:272] reading config from: ./ta.ini
2019-05-11 13:41:55.058 DEBUG RasPiSnd [readConfig] [fileutil.c:276] read ta.ini from ./ta.ini
2019-05-11 13:41:55.060 DEBUG RasPiSnd [readConfig] [fileutil.c:301] read value for volume = 64
2019-05-11 13:41:55.060 DEBUG RasPiSnd [readConfig] [fileutil.c:301] read value for sound_set = 1
2019-05-11 13:41:55.061 DEBUG RasPiSnd [readConfig] [fileutil.c:303] read value for audio_device = equal-dac
2019-05-11 13:41:55.061 DEBUG RasPiSnd [readConfig] [fileutil.c:272] reading config from: /boot/data/sound/raspisound.ini
2019-05-11 13:41:55.062 DEBUG RasPiSnd [readConfig] [fileutil.c:276] read raspisound.ini from /boot/data/sound/raspisound.ini
2019-05-11 13:41:55.063 DEBUG RasPiSnd [readConfig] [fileutil.c:301] read value for enable_i2s = 1
2019-05-11 13:41:55.064 DEBUG RasPiSnd [readMasterConfig] [despi.c:431] vendor = 0
2019-05-11 13:41:55.065 DEBUG RasPiSnd [dumpConfig] [despi.c:308] say_version = 1
2019-05-11 13:41:55.066 DEBUG RasPiSnd [dumpConfig] [despi.c:308] say_preload = 1
2019-05-11 13:41:55.067 DEBUG RasPiSnd [dumpConfig] [despi.c:308] play_boot = 1
2019-05-11 13:41:55.067 DEBUG RasPiSnd [dumpConfig] [despi.c:308] preload = 1
2019-05-11 13:41:55.068 DEBUG RasPiSnd [dumpConfig] [despi.c:308] log_level = 4
2019-05-11 13:41:55.069 DEBUG RasPiSnd [dumpConfig] [despi.c:308] vendor = 0
2019-05-11 13:41:55.069 DEBUG RasPiSnd [dumpConfig] [despi.c:308] sample_pool_size = 0
2019-05-11 13:41:55.070 DEBUG RasPiSnd [dumpConfig] [despi.c:308] preload_threshold = 1
2019-05-11 13:41:55.072 DEBUG RasPiSnd [dumpConfig] [despi.c:308] attract_timeout = 60000
2019-05-11 13:41:55.072 DEBUG RasPiSnd [dumpConfig] [despi.c:308] shaker_active_low = 0
2019-05-11 13:41:55.072 DEBUG RasPiSnd [dumpConfig] [despi.c:308] shaker_enabled = 0
2019-05-11 13:41:55.073 DEBUG RasPiSnd [dumpConfig] [despi.c:308] suppress_repeated = 0
2019-05-11 13:41:55.074 DEBUG RasPiSnd [dumpConfig] [despi.c:308] say_mode = 1
2019-05-11 13:41:55.074 DEBUG RasPiSnd [dumpConfig] [despi.c:308] enable_serial = 0
2019-05-11 13:41:55.074 DEBUG RasPiSnd [dumpConfig] [despi.c:308] serial_baud = 57600
2019-05-11 13:41:55.075 DEBUG RasPiSnd [dumpConfig] [despi.c:306] serial_device = /dev/ttyS0
2019-05-11 13:41:55.077 DEBUG RasPiSnd [dumpConfig] [despi.c:306] stop_cmds = (null)
2019-05-11 13:41:55.077 DEBUG RasPiSnd [dumpConfig] [despi.c:308] loop_music = 1
2019-05-11 13:41:55.078 DEBUG RasPiSnd [dumpConfig] [despi.c:308] enable_i2s = 1
2019-05-11 13:41:55.079 DEBUG RasPiSnd [dumpConfig] [despi.c:308] enable_minidisplay = 0
2019-05-11 13:41:55.080 DEBUG RasPiSnd [dumpConfig] [despi.c:308] enable_dataeast_volume = 0
2019-05-11 13:41:55.081 DEBUG RasPiSnd [dumpConfig] [despi.c:308] dataeast_volume_offset = 0
2019-05-11 13:41:55.081 DEBUG RasPiSnd [dumpConfig] [despi.c:308] pin_shaker = 8
2019-05-11 13:41:55.083 DEBUG RasPiSnd [dumpConfig] [despi.c:308] channels = 2
2019-05-11 13:41:55.088 DEBUG RasPiSnd [dumpConfig] [despi.c:308] frequency = 44100
2019-05-11 13:41:55.088 DEBUG RasPiSnd [dumpConfig] [despi.c:306] sms_address = (null)
2019-05-11 13:41:55.088 DEBUG RasPiSnd [dumpConfig] [despi.c:308] sms_port = 19999
2019-05-11 13:41:55.089 DEBUG RasPiSnd [dumpConfig] [despi.c:308] enable_port_extender = 0
2019-05-11 13:41:55.884 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:232] Scanning for audio devices
2019-05-11 13:41:56.112 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:248] Audio driver 0: pulseaudio
2019-05-11 13:41:56.112 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:248] Audio driver 1: alsa
2019-05-11 13:41:56.113 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:248] Audio driver 2: dsp
2019-05-11 13:41:56.113 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:248] Audio driver 3: disk
2019-05-11 13:41:56.113 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:248] Audio driver 4: dummy
2019-05-11 13:41:56.113 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:251] maxAudioDevices = 12
2019-05-11 13:41:56.113 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:253] audioDev[0]: 'dd51' - (null)
2019-05-11 13:41:56.113 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:253] audioDev[1]: 'equal' - (null)
2019-05-11 13:41:56.113 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:253] audioDev[2]: 'equal-dac' - (null)
2019-05-11 13:41:56.113 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:253] audioDev[3]: 'hw:CARD=ALSA,DEV=0' - builtin 3.5 audio jack
2019-05-11 13:41:56.113 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:253] audioDev[4]: 'hw:CARD=ALSA,DEV=1' - builtin hdmi audio
2019-05-11 13:41:56.113 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:253] audioDev[5]: 'hw:CARD=sndrpihifiberry,DEV=0' - HiFi DAC direct
2019-05-11 13:41:56.113 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:253] audioDev[6]: 'iec958:CARD=ALSA,DEV=0' - (null)
2019-05-11 13:41:56.114 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:253] audioDev[7]: 'plughw:CARD=ALSA,DEV=0' - (null)
2019-05-11 13:41:56.114 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:253] audioDev[8]: 'plughw:CARD=ALSA,DEV=1' - (null)
2019-05-11 13:41:56.114 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:253] audioDev[9]: 'plughw:CARD=sndrpihifiberry,DEV=0' - HiFi DAC with conversion
2019-05-11 13:41:56.114 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:253] audioDev[10]: 'sysdefault:CARD=ALSA' - (null)
2019-05-11 13:41:56.114 INFO RasPiSnd [initAudioDevices] [sdl_sound.c:253] audioDev[11]: 'sysdefault:CARD=sndrpihifiberry' - (null)
2019-05-11 13:41:56.114 INFO RasPiSnd [logAudioDriver] [sdl_sound.c:671] Audio subsystem initialized; driver = alsa.
2019-05-11 13:41:56.114 INFO RasPiSnd [logAudioDriver] [sdl_sound.c:672] Audio freq=0, ch=467952, format=Unknown, opened=0
2019-05-11 13:41:56.117 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:213] State of /proc/asound/card0/pcm0p/sub0/status is closed
2019-05-11 13:41:56.117 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:213] State of /proc/asound/card0/pcm0p/sub1/status is closed
2019-05-11 13:41:56.118 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:213] State of /proc/asound/card0/pcm0p/sub2/status is closed
2019-05-11 13:41:56.118 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:213] State of /proc/asound/card0/pcm0p/sub3/status is closed
2019-05-11 13:41:56.119 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:213] State of /proc/asound/card0/pcm0p/sub4/status is closed
2019-05-11 13:41:56.119 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:213] State of /proc/asound/card0/pcm0p/sub5/status is closed
2019-05-11 13:41:56.131 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:213] State of /proc/asound/card0/pcm0p/sub6/status is closed
2019-05-11 13:41:56.132 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:213] State of /proc/asound/card0/pcm1p/sub0/status is closed
2019-05-11 13:41:56.133 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:213] State of /proc/asound/card1/pcm0p/sub0/status is closed
2019-05-11 13:41:56.133 DEBUG RasPiSnd [soundInit] [sdl_sound.c:833] Env for audio: NOT SET
2019-05-11 13:41:56.133 DEBUG RasPiSnd [soundInit] [sdl_sound.c:837] Using audio from settings: 'equal-dac'
2019-05-11 13:41:56.134 DEBUG RasPiSnd [soundInit] [sdl_sound.c:847] SDL mixer init: v2.4.0, device: equal-dac
2019-05-11 13:41:56.134 DEBUG RasPiSnd [openAudioDevice] [sdl_sound.c:762] OpenAudio: freq=44100, format=32784, ch=2, dev=equal-dac
2019-05-11 13:41:56.229 INFO RasPiSnd [logAudioDriver] [sdl_sound.c:671] Audio subsystem initialized; driver = alsa.
2019-05-11 13:41:56.229 INFO RasPiSnd [logAudioDriver] [sdl_sound.c:672] Audio freq=44100, ch=2, format=S16LSB, opened=1
2019-05-11 13:41:56.230 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:213] State of /proc/asound/card0/pcm0p/sub0/status is closed
2019-05-11 13:41:56.235 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:213] State of /proc/asound/card0/pcm0p/sub1/status is closed
2019-05-11 13:41:56.236 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:213] State of /proc/asound/card0/pcm0p/sub2/status is closed
2019-05-11 13:41:56.236 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:213] State of /proc/asound/card0/pcm0p/sub3/status is closed
2019-05-11 13:41:56.237 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:213] State of /proc/asound/card0/pcm0p/sub4/status is closed
2019-05-11 13:41:56.237 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:213] State of /proc/asound/card0/pcm0p/sub5/status is closed
2019-05-11 13:41:56.238 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:213] State of /proc/asound/card0/pcm0p/sub6/status is closed
2019-05-11 13:41:56.239 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:213] State of /proc/asound/card0/pcm1p/sub0/status is closed
2019-05-11 13:41:56.240 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:211] State of /proc/asound/card1/pcm0p/sub0/status is RUNNING
2019-05-11 13:41:56.240 DEBUG RasPiSnd [showAudioDeviceStat] [sdl_sound.c:212] pid of /proc/asound/card1/pcm0p/sub0/status is 230
2019-05-11 13:41:56.245 DEBUG RasPiSnd [soundInit] [sdl_sound.c:875] looking for custom boot: '/boot/data/sound/boot.ogg'
2019-05-11 13:41:56.281 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/boot.ogg
2019-05-11 13:41:58.700 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/version.ogg
2019-05-11 13:41:59.610 DEBUG RasPiSnd [sayNumber] [sdl_sound.c:627] buf: 1, len 1
2019-05-11 13:41:59.610 DEBUG RasPiSnd [sayNumber] [sdl_sound.c:631] play: 1.ogg
2019-05-11 13:41:59.628 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/1.ogg
2019-05-11 13:42:00.903 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/point.ogg
2019-05-11 13:42:01.871 DEBUG RasPiSnd [sayNumber] [sdl_sound.c:627] buf: 2, len 1
2019-05-11 13:42:01.871 DEBUG RasPiSnd [sayNumber] [sdl_sound.c:631] play: 2.ogg
2019-05-11 13:42:01.876 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/2.ogg
2019-05-11 13:42:03.121 DEBUG RasPiSnd [sayNumber] [sdl_sound.c:627] buf: 8, len 1
2019-05-11 13:42:03.121 DEBUG RasPiSnd [sayNumber] [sdl_sound.c:631] play: 8.ogg
2019-05-11 13:42:03.126 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/8.ogg
2019-05-11 13:42:04.349 INFO RasPiSnd [main] [despi.c:795] /home/pi/despi/despi2 is running with trial license.
2019-05-11 13:42:04.562 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/running-with.ogg
2019-05-11 13:42:06.679 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/trial-license.ogg
2019-05-11 13:42:07.903 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/serialno.ogg
2019-05-11 13:42:09.113 DEBUG RasPiSnd [sayNumber] [sdl_sound.c:627] buf: 3182025625, len 10
2019-05-11 13:42:09.114 DEBUG RasPiSnd [sayNumber] [sdl_sound.c:631] play: 3.ogg
2019-05-11 13:42:09.118 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/3.ogg
2019-05-11 13:42:10.336 DEBUG RasPiSnd [sayNumber] [sdl_sound.c:631] play: 1.ogg
2019-05-11 13:42:10.339 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/1.ogg
2019-05-11 13:42:11.549 DEBUG RasPiSnd [sayNumber] [sdl_sound.c:631] play: 8.ogg
2019-05-11 13:42:11.553 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/8.ogg
2019-05-11 13:42:12.786 DEBUG RasPiSnd [sayNumber] [sdl_sound.c:631] play: 2.ogg
2019-05-11 13:42:12.790 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/2.ogg
2019-05-11 13:42:14.041 DEBUG RasPiSnd [sayNumber] [sdl_sound.c:631] play: 0.ogg
2019-05-11 13:42:14.046 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/0.ogg
2019-05-11 13:42:15.262 DEBUG RasPiSnd [sayNumber] [sdl_sound.c:631] play: 2.ogg
2019-05-11 13:42:15.265 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/2.ogg
2019-05-11 13:42:16.475 DEBUG RasPiSnd [sayNumber] [sdl_sound.c:631] play: 5.ogg
2019-05-11 13:42:16.480 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/5.ogg
2019-05-11 13:42:17.999 DEBUG RasPiSnd [sayNumber] [sdl_sound.c:631] play: 6.ogg
2019-05-11 13:42:18.004 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/6.ogg
2019-05-11 13:42:19.514 DEBUG RasPiSnd [sayNumber] [sdl_sound.c:631] play: 2.ogg
2019-05-11 13:42:19.517 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/2.ogg
2019-05-11 13:42:20.727 DEBUG RasPiSnd [sayNumber] [sdl_sound.c:631] play: 5.ogg
2019-05-11 13:42:20.731 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/5.ogg
2019-05-11 13:42:22.288 INFO RasPiSnd [queryNetworks] [netinfo.c:151] Net-Interfaces found:
2019-05-11 13:42:22.288 INFO RasPiSnd [queryNetworks] [netinfo.c:153] Net: eth0: NOIP
2019-05-11 13:42:22.288 INFO RasPiSnd [queryNetworks] [netinfo.c:153] Net: lo: 127.0.0.1
2019-05-11 13:42:22.288 INFO RasPiSnd [searchSoundSets] [sound_util.c:626] searching for soundsets at: /boot/data/sound
2019-05-11 13:42:22.297 INFO RasPiSnd [searchSoundSets] [sound_util.c:660] found soundset 1, type: 0 at: /boot/data/sound/1
2019-05-11 13:42:22.297 INFO RasPiSnd [searchSoundSets] [sound_util.c:673] maxSoundSets: 1
2019-05-11 13:42:22.297 INFO RasPiSnd [main] [despi.c:829] max soundsets: 1
2019-05-11 13:42:22.298 WARN RasPiSnd [loadHashMappingByName] [sound_util.c:743] no hashes found in '/boot/data/sound/1/config.raspisnd'
2019-05-11 13:42:22.298 DEBUG RasPiSnd [readConfig] [fileutil.c:272] reading config from: /boot/data/sound/1/config.ini
2019-05-11 13:42:22.298 WARN RasPiSnd [readConfig] [fileutil.c:315] config config.ini not found in /boot/data/sound/1
2019-05-11 13:42:22.299 DEBUG RasPiSnd [readConfig] [fileutil.c:272] reading config from: /boot/data/sound/1/config.raspisnd
2019-05-11 13:42:22.299 WARN RasPiSnd [readConfig] [fileutil.c:315] config config.raspisnd not found in /boot/data/sound/1
2019-05-11 13:42:22.302 DEBUG RasPiSnd [scan] [sound_util.c:435] gain for /boot/data/sound/1/jingle is 15
2019-05-11 13:42:22.365 DEBUG RasPiSnd [scan] [sound_util.c:435] gain for /boot/data/sound/1/music is 15
2019-05-11 13:42:22.607 DEBUG RasPiSnd [scan] [sound_util.c:435] gain for /boot/data/sound/1/sfx is 15
2019-05-11 13:42:23.207 DEBUG RasPiSnd [scan] [sound_util.c:435] gain for /boot/data/sound/1/single is 15
2019-05-11 13:42:23.223 DEBUG RasPiSnd [scan] [sound_util.c:435] gain for /boot/data/sound/1/voice is 15
2019-05-11 13:42:23.564 DEBUG RasPiSnd [scanAll] [sound_util.c:785] scan done id hash is: 31071
2019-05-11 13:42:23.564 DEBUG RasPiSnd [initSamples] [sound_util.c:881] sample 0000000001 0x00000001 0x00000001, type: music, gain: 15, name: star_wars_win_theme, path: /boot/data/sound/1/music/0000000001-star_wars_win_theme/000001-music-falcon-vs-tie-fighters.ogg
2019-05-11 13:42:23.564 DEBUG RasPiSnd [initSamples] [sound_util.c:881] sample 0000000002 0x00000002 0x00000002, type: music, gain: 15, name: main_theme, path: /boot/data/sound/1/music/0000000002-main_theme/000002-Star_Wars_IV_-_Main_Title.ogg
2019-05-11 13:42:23.565 DEBUG RasPiSnd [initSamples] [sound_util.c:881] sample 0000000003 0x00000003 0x00000003, type: sfx, gain: 15, name: laser, path: /boot/data/sound/1/sfx/0000000003-laser/000003-pistol-1.ogg
........................

Tilt audio assembled (resized).jpgTilt audio assembled (resized).jpg
0
0
0
#863 4 years ago
 
RHO

Rensh

Pinside+ Frequent

11y 136K 4,134 5 22

I checked the logfile further and I see among others this

2019-05-11 13:41:56.640 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/boot.ogg
2019-05-11 13:41:59.081 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:562] play sound: sounds/version.ogg

However, a sounds directory isnt visible on the Windows part, could this be on the Linux part which I cant see or is it missing and this is the reason for not hearing anything when booting? This is a fresh image which I installed and only updated.

0
0
0
#873 4 years ago
 
RHO

Rensh

Pinside+ Frequent

11y 136K 4,134 5 22

Quoted from kba78:

Can anyone tell me the music that plays at the end of the game never stops? Just goes on and on. Data East star wars by the way

There is a setting in the config where you can state if music should loop or not. Sounds like yours is set on looping.

3 weeks later
0
1
1
#885 4 years ago
 
RHO

Rensh

Pinside+ Frequent

11y 136K 4,134 5 22

I can’t get a sound to on a F board.

Did go the old Usb dongle route and connected that to the amplifier (and thus bypassing the DAC module) and that worked. But was not possible to adjust sound level via potmeter in the cabinet of a SW DE.

For the moment i have laid this project aside as non working. Have a dac module on order and see if that does the trick.

You really have to see that this is a project for a lot of DIY and limited support from supplier. If that’s OK for you go ahead, if not go to France.

0
0
0
#887 4 years ago
 
RHO

Rensh

Pinside+ Frequent

11y 136K 4,134 5 22

I tested it in my SW DE and the sounds were played correctly. Couldn’t adjust soundlevel via potmeter which is annoying. Unexpected sold the SW but took out the tilt audio board.

1 week later
0
0
0
#916 4 years ago
 
RHO

Rensh

Pinside+ Frequent

11y 136K 4,134 5 22

Steve

This error in the layout, is this causing the no sound I am experiencing?

0
0
0
#920 4 years ago
 
RHO

Rensh

Pinside+ Frequent

11y 136K 4,134 5 22

OP
Quoted from steve45:

Most probably yes. Which revision of the board are you using?

F version

0
0
0
#926 4 years ago
 
RHO

Rensh

Pinside+ Frequent

11y 136K 4,134 5 22

OP
Quoted from steve45:

The layout error "only" disrupts the communication between the game and the pi. Sound in general e.g. triggered from web ui should work.

I didn’t get any sound via the web ui but the sounds via usb in real data East pinball were ok.

Promoted items from Pinside Marketplace and Pinside Shops!
Wanted
Machine - Wanted
Wanted: Creature from the Black Lagoon
West Chicago, IL
GAP
$ 1.00
Lighting - Other
LightShields for under playfield
Rocket City Pinball
 
$ 32.00
Electronics
Data East Sega Power Supply Cap Kit 520-5047-03
Yorktown Arcade Supply
 
From: $ 9,499.00
Pinball Machine
Jurassic Park
Paradise Distribution
 
$ 1,059.00
Pinball Machine
Funhouse Mirco Repro Playfield
Mircoplayfields
 
$ 19.00
Electronics
Getaway Rear Ramp Up/Down Switch, Free Shipping
NO GOUGE PINBALL™
 
Wanted
Machine - Wanted
Wanted: Jurassic Park
Los Angeles, CA
Hazry
$ 10.00
Playfield - Protection
Doctor Who Dalek Slingshot Plastic Protectors
UpKick Pinball
 
Wanted
Machine - Wanted
Wanted: The Getaway: High Speed II
Fort Lauderdale, FL
VINCE
$ 170.00
Displays
Led Display Williams WPC 2x16Alf
Digipinball Shop
 
$ 100.00
Playfield - Toys/Add-ons
Jurassic Park 3D Printed Gate with LED lighting
G-Money Mods
 
$ 549.00
Playfield - Other
CREECH VIDEO MOD VERS 2. CFTBL CREATURE FROM BLACK LAGOON
Juz PINBALL Mods
 
From: $ 17.99
Eproms
Creature From The Black Lagoon - CPU Rom [U6]
Matt's Basement Arcade
 
$ 79.99
Cabinet - Armor And Blades
Williams Funhouse "Coaster" PinBlades
PinGraffix Pinside Shop
 
$ 35.00
Cabinet - Other
3D Coin Reject Buttons - Doctor Who
Rocket City Pinball
 
$ 18.95
Eproms
ROM STAR WARS -GAL/PAL-SOUND
Pinballrom
 
$ 45.00
Playfield - Toys/Add-ons
NEW!!! Star Wars Speeder Bike Mods For Star Wars Machines
Pixels Arcade Games
 
Trade
Machine - For Trade
Creature from the Black Lagoon
East Rutherford, NJ
Santis
$ 9.99
Eproms
DR. WHO Pinball - CPU Rom [U6]
Matt's Basement Arcade
 
$ 250.00
Lighting - Interactive
CFTBL Pinduino Interactive Lighting Kit
Professor Pinball
 
$ 35.00
Cabinet - Other
3D Coin Reject Buttons - Tales from the Crypt
Rocket City Pinball
 
From: $ 20.00
Lighting - Led
Data East Jurassic Park Pinball Machine Glass LED
Mitchell Lighting
 
$ 15.00
Playfield - Decals
TALES FROM THE CRYPT Guillotine Chrome cap set of 3
Metal-Mods
 
$ 329.99
Lighting - Other
Creature CFTBL -Colored LED Speaker Panel -ULTIMATE
Lighted Pinball Mods
 
$ 250.00
Playfield - Other
Jurassic Park Main Wavy Wireform (Data East)
Avid Creations Wireforms
 
€ 25.00
Playfield - Toys/Add-ons
Creature from the Black Lagoon pinball mod switch cover
PPmods
 
Hey modders!
Open a free Shop and start selling on Pinside
Your shop name here

You're currently viewing posts by Pinsider rensh.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

This page was printed from https://pinside.com/pinball/forum/topic/rebuilding-sound-for-de-jurassic-park-using-a-pi?tu=rensh and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.