Hi Steve,
Received your red board kit a few days ago, and built it today. All went well, and I've installed it in my ST:TNG and successfully connected to it via WiFi. I've put firmware 1.25 on it. This board is replacing a Pinsound board in the machine, so I copied over the ST:TNG Original sound set over to the Tilt board. It seems I'm running into the scrambled soundset problem:
2019-05-25 07:53:35.359 INFO RasPiSnd [main] [despi.c:810] max soundsets: 1
2019-05-25 07:53:35.359 ERROR RasPiSnd [loadHashMappingByName] [sound_util.c:758] loading hashes from /boot/data/sound/Star_Trek_The_Next_Generation_Original/config.raspisnd FAILED
2019-05-25 07:53:35.359 DEBUG RasPiSnd [readConfig] [fileutil.c:272] reading config from: /boot/data/sound/Star_Trek_The_Next_Generation_Original/config.ini
2019-05-25 07:53:35.359 WARN RasPiSnd [readConfig] [fileutil.c:315] config config.ini not found in /boot/data/sound/Star_Trek_The_Next_Generation_Original
2019-05-25 07:53:35.359 DEBUG RasPiSnd [readConfig] [fileutil.c:272] reading config from: /boot/data/sound/Star_Trek_The_Next_Generation_Original/config.raspisnd
2019-05-25 07:53:35.359 WARN RasPiSnd [readConfig] [fileutil.c:315] config config.raspisnd not found in /boot/data/sound/Star_Trek_The_Next_Generation_Original
2019-05-25 07:53:35.360 DEBUG RasPiSnd [scan] [sound_util.c:450] gain for /boot/data/sound/Star_Trek_The_Next_Generation_Original/jingle is 15
2019-05-25 07:53:35.360 DEBUG RasPiSnd [scan] [sound_util.c:452] no of serial cmds for /boot/data/sound/Star_Trek_The_Next_Generation_Original/jingle is 0
2019-05-25 07:53:35.360 DEBUG RasPiSnd [scan] [sound_util.c:450] gain for /boot/data/sound/Star_Trek_The_Next_Generation_Original/music is 15
2019-05-25 07:53:35.360 DEBUG RasPiSnd [scan] [sound_util.c:452] no of serial cmds for /boot/data/sound/Star_Trek_The_Next_Generation_Original/music is 0
2019-05-25 07:53:35.367 DEBUG RasPiSnd [scan] [sound_util.c:450] gain for /boot/data/sound/Star_Trek_The_Next_Generation_Original/sfx is 15
2019-05-25 07:53:35.368 DEBUG RasPiSnd [scan] [sound_util.c:452] no of serial cmds for /boot/data/sound/Star_Trek_The_Next_Generation_Original/sfx is 0
2019-05-25 07:53:35.394 DEBUG RasPiSnd [scan] [sound_util.c:450] gain for /boot/data/sound/Star_Trek_The_Next_Generation_Original/voice is 15
2019-05-25 07:53:35.395 DEBUG RasPiSnd [scan] [sound_util.c:452] no of serial cmds for /boot/data/sound/Star_Trek_The_Next_Generation_Original/voice is 0
2019-05-25 07:53:35.467 DEBUG RasPiSnd [scanAll] [sound_util.c:800] scan done id hash is: 1145143795
2019-05-25 07:53:35.467 ERROR RasPiSnd [loadHashMappingByName] [sound_util.c:758] loading hashes from configs/1145143795.raspisnd FAILED
2019-05-25 07:53:35.467 ERROR RasPiSnd [initSamples] [sound_util.c:875] looks like a scrambled soundset is used, but no mapping provided
2019-05-25 07:53:35.469 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:513] play sound: sounds/scrambled-ids.ogg
2019-05-25 07:53:37.874 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:513] play sound: sounds/config-missing.ogg
2019-05-25 07:53:39.683 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:513] play sound: sounds/mode.ogg
2019-05-25 07:53:40.287 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:513] play sound: sounds/wpc.ogg
2019-05-25 07:53:41.491 DEBUG RasPiSnd [playSystemSound] [sdl_sound.c:513] play sound: sounds/dcs.ogg
I've seen earlier messages that indicate I should be using a mapping file, but I can't find any at the links that have been posted.
Any help or guidance you could give would be appreciated.