Got a Stars for $150. Had to repair the boards, alkaline damage from the battery. Got a decent backglass from a Pinside member in Atlanta. Put in led's.
And then made my own playfield protector.
First buy the plastic :
https://www.walmart.com/ip/3-pack-PETG-CLEAR-PLASTIC-SHEET-020-24-X-48/911517885
Then I used transparency sheets to make a template.
You lay them on the playfield. Use a marker to mark where they need to be trimmed. Cut them with scissors and when happy with the fit , lay them on the playfield and tape them together.
Then trace the template onto the plastic.
Cut it out with scissors, spade drill bits, and an exacto knife.
Install and enjoy.
Untitled (resized).png20181006_181828(1) (resized).jpg20181006_182944 (resized).jpg20181006_184623 (resized).jpg20181006_210310 (resized).jpg20181006_210314 (resized).jpg20181006_210318 (resized).jpg