Here you go! I hope this is high enough quality. If not, please let me know.

Also, if that overlay fits for you, please let me know. I might be interested in buying one from you to help offset your costs.

Also, if you're screen-printing new plastics, I could certainly use the mid-playfield one from the TEAM drop bank.

Let me know if you need any more pictures. I'm not equipped for large format scans, but I have a flatbed that can accomodate smaller plastics. 89A5B4D0-3B5C-4BD3-8F6E-DDD9A5E99884.jpeg

Sure, I have all my plastics and will try to give a scan when I can. I started laser cutting with PETG earlier this year but the bed on the one I have access to isn't large enough for PF protectors.

Looking good! Looking real good! I'm hoping to find some time this weekend to pull plastics and get them scanned for you.

The locations where the hole is "too big" had lamps with a red condom over them. There was a relay in the original game that toggled between them and the regular GI. In attract mode, it toggled on a ten second cycle, and in-game they were activated when in multiball.

The locations where the hole is too small is standard white GI. I had to drill mine out slightly to upgrade to OPMax lamps from Comet Pinball. Worth the playfield alteration entirely.

Wow! That's looking great!

I haven't forgotten about you for the plastic scans- I haven't had the time to get the glass off the machine.

I have a large bed scanner in my office that I've been meaning to break in and I'll be bringing them there.