How to you adjust the left scoop so it does not throw the ball down the drain? It is a buzz kill on a fun game. I have loosened the assembly and pivoted a bit but no luck. Friends love the game but everyone does not like the drains action.
You're currently viewing posts by Pinsider mg7322.
Click here to go back to viewing the entire thread.
How to you adjust the left scoop so it does not throw the ball down the drain? It is a buzz kill on a fun game. I have loosened the assembly and pivoted a bit but no luck. Friends love the game but everyone does not like the drains action.
Hello,
So i loosened the screws on the assembly and applied pressure to shift it a bit more to the left then re-tightened. (Baby steps here). Played a few games and it was behaving ok. Played a few today and it has not been consistent, seems to still drain. If I “pre-shake” the pin the moment the ball ejects I can change the trajectory to hit the flipper.
So next step is to buy a new cliffy and look at some new drill hole and pivot the assembly a bit more.
No weld cracks on the assembly. So far pinballlife suggestion of bending the scoop down a little bit has made a big difference. It now hits the left flipper at the very end. Here is a picture of the slight bend down. I have not taken it off the board and looked at the actual coil alignment inside the track.
How do you post a video? Only can upload pictures.
A3225F16-84ED-46FF-9C68-6466BD1ADD68 (resized).jpegWhat switch causes the numbers in the top right corner to cycle? I noticed my right flipper button will cycle the numbers and points are awarded sometimes. Is this in the rule set or do I have to do some digging?
You're currently viewing posts by Pinsider mg7322.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/rbion-the-strange-the-unusual-the-bizarre?tu=mg7322 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.