MAKE SURE YOU HAVE RUN THE GROUND WIRE on the interconnect between logic and driver...its missing on Raven and all system 80, 80A, and most system 80B games...it is on far right side opposite the single ground. It fixes a ton of other issues.
You're currently viewing posts by Pinsider toddtuckey.
Click here to go back to viewing the entire thread.
MAKE SURE YOU HAVE RUN THE GROUND WIRE on the interconnect between logic and driver...its missing on Raven and all system 80, 80A, and most system 80B games...it is on far right side opposite the single ground. It fixes a ton of other issues.
If you do my Ground Mod fix in this video, you will solve TONS of other potential problems--shutting off, coil not working intermittently, sound cut off, etc, etc, etc....after doing this mod over 500 times in the last 30 years, we rarely have issues with those machines! AND...running the single new ground wire in connector between A1 and A3 again....Todd from TNT
You're currently viewing posts by Pinsider toddtuckey.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/raven-no-sound-checked-logic-w-dmm?tu=toddtuckey and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.