Hi all,

I think about doing quicksilver. Please email me if you are interested and a playfield repro.

Regards,
mirco

Ok, looks like there is lot more demand than I expected. Please forgive me if I do not reply to all massages Individually. I try to put all replys in the thread so that everyone is on the same page.

I will get the artwork in the cue which will take probably 2 weeks preparation. As soon as the black layer is done the playfields go on one of the robots so that we might have the final product before Christmas. Worst case shortly after Christmas. Usual turnaround time is 5 weeks but as there are some other projects going on same time we need to se how it comes along.

Next playfields available are whirlwind and creature.

Regards,
Mirco

Miracles still happen

Don't worry about colors. Before I finalize the run I do always check for other samples pics in the web. I will get plastics done same time...

As far as barracora goes I just need a usable playfield to scan it and the art should be not too bad...

Regards,
Mirco

Of course all inserts will be as original. I have all molds myself. I will do playfield plastic sets same time. As far as we are talking about any other titles - just get me a master and they go on the line immediately.

Right now Gary told me that there is no one else around right now who has a license to do anything. So it is just words....

Regards,
Mirco

If there is demand I would do any title as long as the licence is available.

I use a 600000$ cruise scanner to scan playfields for highest resolution without size difference. Not sure how good the scan is you have but I would need the physical playfield anyway for cad...

Regards,
Mirco

As I said, all are possible if I get a reasonable master...

Not all the same time, but I guess that I can do 15 to 20 new titles a year...

Regards,
Mirco

To stop all speculation here. The price will be 999usd shipped to us or Canada. Same like all other single playfields I have. 1099 is for all playfields including minis.

Regards,
Mirco

What do you mean by how long do we have to make the cut?
Regards,
Mirco

Don't worry. I have a different business model.

First I have only one perfect quality level. There is no use for replacing a worn playfield with production seconds.

Second

Whatever I did will be available as long as I have stock and will be rerun before I run out until any 3rd party licence expires.

And as preorder lists take a lot of time and are not very accurate i do not do them at all. This saves time...

With a capacity of 50 to 100 playfields daily I have enough room to react to demand increases and usually always stock at least 10 of each kind...

Regards,
Mirco

I'm getting home today and will work on playfields the next week. Not sure what my crew finished while I was out but as far as i know they are printing or finished printing. I will probably have them ready around Easter or shortly after.

Regards,
Mirco

I will have them available end of this week. Yes, the issue is that I have all machines busy with other projects right now. I will get another router in 2 weeks and have more capacity then...

Regards,mirco

Quicksilver playfields are now available!

Regards,
Mirco