Getaway: High Speed II, The
Williams, 1992You're currently viewing posts by Pinsider Blenderhead.
Click here to go back to viewing the entire thread.
I recently bought a Getaway that was already torn apart, then I re-decaled the cabinet and put it back together. Problem is, no signs of life on the DMD. I think I should check the power going to the DMD, but if anyone has any clues how/what to test, I'm all ears. And thanks for suggestions in advance.
I tested with the out put and on the pin where I should have 12VDC I have about 7. I looked at the diode (D7) and the resistor (R7) and they do not appear cooked. Any suggestions?
Quoted from GRUMPY:Did you check J-606 pins 6,7 for 12 volt unreg. Or you can for voltage on each side of D-7 and R-7.[quoted image]
I just did, I had 15vdc at both pins 6, 7 on J606. I also retested J604, and have 65vdc at pin 8, but only 7bed at pin 7. I think pin 7 is supposed to have 12vdc, but not certain.
You're currently viewing posts by Pinsider Blenderhead.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/question-on-testing-a-dmd-on-a-getaway?tu=Blenderhead and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Huntington Beach, CA