Hello,
I just got a Qbert that needs some love.
Pascal Janin's card helped to revive it, but i need to work on the playfield.
First, is there a complete rubber list and map, as the manual lacks a lot of them.
In addition, on this one, i don't have real minipost above the lower pinball bats, it's more rigid metallic wires.
Is it something common ? Shall i change that and what would be the ref of these posts ?

Any help appreciated as it's supposed to be part of an event for our charity program in two weeks

Thanks, I have some paint to do but really few spots and mostly in black areas.
My main concerns are the rubbers and these minipost above the lower bats that are not the same as the ones I see on most of the pictures.

What rubber shall I put in these two bar?
These are supposed to be minipost, right?
DSC_0713 (resized).JPG
And yes, I'll make the place clean before putting rubbers ^^

Again with my rubbers issue !
DSC_0714 (resized).JPG
Here is the current status of my QBert
I've labelled in Orange all rubbers that were expected on the manual, and are present.
Circled in blue pen are the ones listed on the manual and that are missing, but I'll purchase them.
Circled in blue marker are all rubbers not listed at all (plus the rubber for the 4 bats)

Mostly all not listed rubbers are supposed to be minipost rubbers (Ref E)
At the end, that means :
A: A-10217 = 9
B: A-10219 = 6
C: A-10220 = 1
D: A-10222 = 2
E: A-15705 = 26
F: A-17493 = 1
Bats: A-13151 = 4

But two rubbers are not listed at all and I'm not sure about the ref, the ones on the left and right part of the slingshots, around the ref. 30)

I noticed also that I'm missing the minipost (crossed on the pictures), not sure why as it seems they were present and have been removed.

If anyone can confirm my list and/or give me the ref for the two missing ones, that would be lovely !