Again with my rubbers issue !
DSC_0714 (resized).JPG
Here is the current status of my QBert
I've labelled in Orange all rubbers that were expected on the manual, and are present.
Circled in blue pen are the ones listed on the manual and that are missing, but I'll purchase them.
Circled in blue marker are all rubbers not listed at all (plus the rubber for the 4 bats)
Mostly all not listed rubbers are supposed to be minipost rubbers (Ref E)
At the end, that means :
A: A-10217 = 9
B: A-10219 = 6
C: A-10220 = 1
D: A-10222 = 2
E: A-15705 = 26
F: A-17493 = 1
Bats: A-13151 = 4
But two rubbers are not listed at all and I'm not sure about the ref, the ones on the left and right part of the slingshots, around the ref. 30)
I noticed also that I'm missing the minipost (crossed on the pictures), not sure why as it seems they were present and have been removed.
If anyone can confirm my list and/or give me the ref for the two missing ones, that would be lovely !
Quoted from Hammerhead:Q*bert's Quest owners, looking for someone who has the original key fob plastics to give me accurate measurements to make reproductions.
[quoted image]
Bump, just looking for some measurements
Hi,
A friend have a Qbert with Pi80 card , it had an Error 4 with a switch. Now i replace the switch, no more Error.
But when i launch a game, no more slingshot, bumper and flipper coil is working.
Sound , lamp matrix, switch, other coils are working .
Where did the problem come from ? perhaps only a fuse but which one control this three stuff ?
F4 24 V fuse ?
Perhaps but why should a faulty swith (67) do a blow fuse here ?
Thanks
Why does Marco only sell one half of the decals for the drop targets?! What the hell good is that?
https://www.marcospecialties.com/pinball-parts/A-22623
Does anyone know where you can get both left and right decals?
Does anyone know which pins are used in front of the 2 lower flippers? I have the holes but nothing else. Found part number A-14792 but is a screw in post. Does not seem like the right one.
Also could use stickers for the pop bumper but guessing I will need to print them.
Quoted from BENETNATH:Again with my rubbers issue !
[quoted image]
Here is the current status of my QBert
I've labelled in Orange all rubbers that were expected on the manual, and are present.
Circled in blue pen are the ones listed on the manual and that are missing, but I'll purchase them.
Circled in blue marker are all rubbers not listed at all (plus the rubber for the 4 bats)
Mostly all not listed rubbers are supposed to be minipost rubbers (Ref E)
At the end, that means :
A: A-10217 = 9
B: A-10219 = 6
C: A-10220 = 1
D: A-10222 = 2
E: A-15705 = 26
F: A-17493 = 1
Bats: A-13151 = 4
But two rubbers are not listed at all and I'm not sure about the ref, the ones on the left and right part of the slingshots, around the ref. 30)
I noticed also that I'm missing the minipost (crossed on the pictures), not sure why as it seems they were present and have been removed.
If anyone can confirm my list and/or give me the ref for the two missing ones, that would be lovely !
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/qberts-quest-pinball-ownersfans-restore-game-play-owners/page/3 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.