Quoted from Biglouie:@g-p-e thank you for coming back to me. All understood. I'll see what I can find for these caps online.
The speaker config on #thegetaway is Pre-DCS type, the back box speakers are wired in parallel with each other but wired in series with the cabinet speaker.
http://www.dziedzic.us/wpc_speaker_sound_info.html
As the circuit contains all the speakers, my plan was to switch the circuit across J504-3 and J505-2...Hopefully this will do the trick.. [quoted image]
Hi
I wouldn't do that...
your shorting the output of the amp to ground!
you need to put the relay contacts in series with the speakers, ideally use the existing bullet-connector
cheers Bob