(Topic ID: 215891)

Prototyping a "Hardtop" (High Speed)


By Skypilot

1 year ago



Topic Stats

  • 342 posts
  • 71 Pinsiders participating
  • Latest reply 2 days ago by Lovef2k
  • Topic is favorited by 73 Pinsiders

You

Linked Games

Topic Gallery

There have been 117 images uploaded to this topic. (View topic image gallery).

IMG_5400 (resized).JPG
IMG_5399 (resized).JPG
IMG_5398 (resized).JPG
IMG_5397 (resized).JPG
IMG_5396 (resized).JPG
IMG_5395 (resized).JPG
IMG_5394 (resized).JPG
IMG_5389 (resized).jpg
IMG_5393 (resized).JPG
IMG_5392 (resized).jpg
IMG_5390 (resized).jpg
555c898ebebc3766427fede01adc99f77a2785ca (resized).jpg
20190821_195504 (resized).jpg
20190822_081725 (resized).jpg
21B1179D-BE5B-4F46-8D7F-6A1844F82223 (resized).jpeg
IMG_3218 (resized).JPG

There are 342 posts in this topic. You are on page 7 of 7.
#301 29 days ago
Quoted from DuffysArcade:

I haven't installed yet. Is it possible to change the 3,000 lettering with a water slide decal?

No I meant get the hardtop swapped for one that's correct. I'm not going to accept a hardtop with an error after spending that kind of money.

#302 29 days ago

If you haven’t installed yet, I would try to have it swapped out.

11
#303 28 days ago

Well, we have been alerted. We will need to work on a solution. However, as a reminder we are down right now... and any reprints will take time.

We apologize for this. I hope you all realize that we put these through multiple steps to make sure these are correct before releasing. Still... it seems we have missed something. It is harder than it seems. It is a little like the worst game of “find waldo” ever. Sometimes your off in the weeds fixing obscure problems.. and an obvious one slips by.

Let us regroup and figure out how quickly we can come up with a fix...or reprint.

#304 28 days ago
Quoted from Outsidedge:

Well, we have been alerted. We will need to work on a solution. However, as a reminder we are down right now... and any reprints will take time.
We apologize for this. I hope you all realize that we put these through multiple steps to make sure these are correct before releasing. Still... it seems we have missed something. It is harder than it seems. It is a little like the worst game of “find waldo” ever. Sometimes your off in the weeds fixing obscure problems.. and an obvious one slips by.
Let us regroup and figure out how quickly we can come up with a fix...or reprint.

There are ways to compare images with software to find differences. We used this to generate a mask in the alpha channel that contained the difference found within some adjustable degree of tolerance. It’s not a silver bullet but it could certainly detect a 1 versus a 3 like this. I wish I could be more helpful but this was like ten years ago. Pretty sure we used the free ImageMagik library for it.

#305 28 days ago
Quoted from Outsidedge:

Well, we have been alerted. We will need to work on a solution. However, as a reminder we are down right now... and any reprints will take time.
We apologize for this. I hope you all realize that we put these through multiple steps to make sure these are correct before releasing. Still... it seems we have missed something. It is harder than it seems. It is a little like the worst game of “find waldo” ever. Sometimes your off in the weeds fixing obscure problems.. and an obvious one slips by.
Let us regroup and figure out how quickly we can come up with a fix...or reprint.

Thanks for the response. Not an ideal situation for anyone, I know.

#306 28 days ago

Would you believe Skypilot's "final prototype" in post #112 had this? Amazing.

#308 28 days ago
Quoted from 64bsstp:

Would you believe Skypilot's "final prototype" in post #112 had this? Amazing.

Not my best day. My apologies to the masses

We corrected so many details. I can't believe I also missed this one. Oh well, mine is completely installed and I have no plans on redoing it. I've reached my inner peace with my pinball addiction . The cabinet is almost done and I'm ready to just enjoy this.

45E8C3A6-9344-4FFB-AB93-F4424CAC688A (resized).jpeg9F12BCA0-417C-425F-9580-6C07FF4BA736 (resized).jpeg
#309 28 days ago
Quoted from Skypilot:

Not my best day. My apologies to the masses
We corrected so many details. I can't believe I also missed this one. Oh well, mine is completely installed and I have no plans on redoing it. I've reached my inner peace with my pinball addiction . The cabinet is almost done and I'm ready to just enjoy this.[quoted image][quoted image]

It’s a major improvement and a very minor flaw.

Damn your cabinet looks amazing, did you repaint/restencil?

#310 28 days ago
Quoted from zaphX:

It’s a major improvement and a very minor flaw.
Damn your cabinet looks amazing, did you repaint/restencil?

New paint and pinballpimp stencils.

#311 28 days ago
Quoted from Skypilot:

New paint and pinballpimp stencils.

Looking nice! I built a new backbox as mine is trash. Will be using PP stencils for that, as well.

While I know they won’t be an exact match, mind sharing paint codes? Will give me a starting point for color matching.

#312 28 days ago

I sold this about 5 years ago! If we could only see the into the future! Yes that's an original white wood HS

PB040219 (resized).JPG
#313 28 days ago

So obviously all the hard tops have this error....

I was just getting ready to install mine....

No rush now that there is an error on it. Hoping they will make it right.

#314 27 days ago
Quoted from wamonkey:

So obviously all the hard tops have this error....
I was just getting ready to install mine....
No rush now that there is an error on it. Hoping they will make it right.

There will be a fix. It should be doable in the field. We will have instructions. This is a fix that for the most part can only be executed prior to install.

Fo those that have applied, I am not sure the change is worth the work involved. However, we will address this as well.

One digit will need carefully removed, and we will send a digit to apply that matches.

We will be in touch soon!

#315 27 days ago
Quoted from cjchand:

mind sharing paint codes? Will give me a starting point for color matching.

Shared .The colors were great and vibrant but I did not look to match existing color. Also being this is a Hardtop and not a full restoration I am experimenting with product.Ive had several issues with the application (lift,crackeling ect.) so Im not endorsing these products.

IMG_3217 (resized).JPGIMG_3218 (resized).JPG
#316 27 days ago
Quoted from Outsidedge:

There will be a fix. It should be doable in the field. We will have instructions. This is a fix that for the most part can only be executed prior to install.
Fo those that have applied, I am not sure the change is worth the work involved. However, we will address this as well.
One digit will need carefully removed, and we will send a digit to apply that matches.
We will be in touch soon!

That was what I was thinking - remove the the “3” replace with a “1” decal just before install.

I am sure it will be fine in the end, at least it was caught now for me before install....for that I am grateful.

Thanks....

#317 27 days ago

How would you go about removing the 3 when it is printed on the back of the plastic and has the adhesive over it? Looks to me like it would scratch or cut the plastic.

#318 27 days ago
Quoted from ita47:

How would you go about removing the 3 when it is printed on the back of the plastic and has the adhesive over it? Looks to me like it would scratch or cut the plastic.

Solution coming.

#319 27 days ago
Quoted from zaphX:

It’s a major improvement and a very minor flaw.
Damn your cabinet looks amazing, did you repaint/restencil?

This times 100. Hell I work as a software quality assurance analyst and missed it. Just one of those things hahaha. Still it looks super awesome so I'm still happy with it. Good to know the future ones will be corrected as well.

11
#320 27 days ago

Fixed.

Eat your heart out HEP

PM me, and I'll custom-make these for any hardtop owners.

#321 27 days ago
Quoted from zh2oson:

Fixed.
[quoted image]
PM me, and I'll custom-make these for any hardtop owners.

That's the wrong font.

#322 27 days ago
Quoted from Skypilot:

That's the wrong font.

Touche.

#323 24 days ago

Wow. That's a little disheartening. I still have yet to get to the stage of applying the Hardtop, I just finished the final coat of clear. Working slowly and carefully maybe what saves me. It'll be interesting to see what the potential fix would be... As ita47 points out, removing the printed numbers on the underside seems like it could make the situation worse.

Quoted from ita47:

How would you go about removing the 3 when it is printed on the back of the plastic and has the adhesive over it? Looks to me like it would scratch or cut the plastic.

I've never done anything like this before and don't trust my skills as a 'craftsman', sanding the original artwork off gave me incredible anxiety.

20190821_195504 (resized).jpg20190822_081725 (resized).jpg
#324 24 days ago
Quoted from detroitzoran:

Wow. That's a little disheartening. I still have yet to get to the stage of applying the Hardtop, I just finished the final coat of clear. Working slowly and carefully maybe what saves me. It'll be interesting to see what the potential fix would be... As ita47 points out, removing the printed numbers on the underside seems like it could make the situation worse.

I've never done anything like this before and don't trust my skills as a 'craftsman', sanding the original artwork off gave me incredible anxiety.[quoted image][quoted image]

Looks awesome - probably more than needed since you are basically putting a giant plastic decal over it. But, now you have a ton of time might as well do it perfectly.

Looks great...

#325 24 days ago
Quoted from detroitzoran:

Wow. That's a little disheartening. I still have yet to get to the stage of applying the Hardtop, I just finished the final coat of clear. Working slowly and carefully maybe what saves me. It'll be interesting to see what the potential fix would be... As ita47 points out, removing the printed numbers on the underside seems like it could make the situation worse.

I've never done anything like this before and don't trust my skills as a 'craftsman', sanding the original artwork off gave me incredible anxiety.[quoted image][quoted image]

Give that clear lots of time to cure when you can’t smell it it’s done outgassing and cured
I’d say this hardtop delay may work in your favor

#326 24 days ago
Quoted from zh2oson:

Fixed.
[quoted image]
PM me, and I'll custom-make these for any hardtop owners.

Looks better than my idea

555c898ebebc3766427fede01adc99f77a2785ca (resized).jpg
#327 24 days ago
Quoted from cjchand:

Looks better than my idea[quoted image]

Disagree. I should have work-shopped my idea more. Your revision is sublime.

#328 24 days ago
Quoted from detroitzoran:

Wow. That's a little disheartening. I still have yet to get to the stage of applying the Hardtop, I just finished the final coat of clear. Working slowly and carefully maybe what saves me. It'll be interesting to see what the potential fix would be... As ita47 points out, removing the printed numbers on the underside seems like it could make the situation worse.

I've never done anything like this before and don't trust my skills as a 'craftsman', sanding the original artwork off gave me incredible anxiety.[quoted image][quoted image]

Looks great, man!

Like others noted, upside is you can resist the temptation to install before the clear has time to cure. That can only be better in the long-term.

#329 23 days ago

Thanks.
I guess waiting now is going to be the hardest part.
Listening to everyone's advice here I started with a 5 inch random orbital sander beginning with the 80 grit and worked my way up to 220. Then I cleared using Spraymax 2K clear coat that comes in a rattle can.

#330 23 days ago
Quoted from detroitzoran:

I guess waiting now is going to be the hardest part.

I am in the middle of a RoboWar restoration so I had not even begun on my High Speed. Lucky me that my hardtop is still in the box waiting. I don't want more than one machine down at a time. My RW will probably be another 6 weeks until I am finished so I have plenty of time to wait for a solution to the typo.

#331 21 days ago

If anyone wants to sell their defective HS hardtop. PM me

#332 20 days ago

OK,

First, sorry again for the mistake to customers that received them. All High Speed Hardtops to be shipped moving forward will have this fix. Then, as more are produced in the coming months, the printing will be corrected on this single instance points insert.

Please see the photos attached here. This actually looks like a more of a job than it is. I think it took me under 10 minutes to make the repair. I will have some number "1" digits to send all those who wish to make this fix. We can mail them out to those who PM me. It seems that for some... this mistake is not a biggy... while others are more concerned that it be fixed. So, again... if you wish to make this change prior to install, simply contact us.

Note that this is a fix that can only be administered PRIOR to installation on your playfield. It boils down to a small blade and gentle scraping (with patience)... repolish ... re-apply correct digit. The digits we will send will provide for identical density when lit also.

Also, I suggest using a magnifying glass... or head band style magnifying lense to make the job easier and more precise.

If you already applied your Hardtop, please PM us... or email @ sales@pinballgifts.com
IMG_5393 (resized).JPGIMG_5394 (resized).JPGIMG_5395 (resized).JPGIMG_5396 (resized).JPGIMG_5397 (resized).JPGIMG_5398 (resized).JPGIMG_5399 (resized).JPGIMG_5400 (resized).JPGIMG_5390 (resized).jpgIMG_5392 (resized).jpgIMG_5389 (resized).jpg

#333 20 days ago
Quoted from Outsidedge:

OK,
The digits we will send will provide for identical density when lit also.

I was just about to write about that, but made myself re-read it. Glad you beat me to the punch

Thanks for working on solutions for both those of us who have installed already, as well as those who have not.

#334 20 days ago

PM sent....I can live with what we have to do...it’s only pinball....

Thanks...

#335 19 days ago
Quoted from wamonkey:

PM sent....I can live with what we have to do...it’s only pinball....
Thanks...

Thank you all for your kind responses. I have received several requests for digits. I will have them mailed out by next Monday. We feel bad about the little goof.. but this was our first actual printing error out of 13 titles... WAIT! That is what happened. Damn unlucky number 13.

Thanks again folks. KEEP FLIPPING

1 week later
#336 7 days ago

Attention High Speed folks! We are (limping) back on line.... We have 6 finished High Speed Hardtops ready for shipment. We are NOT turning on the website for another 30 days or so... but if you would like one of these it's first come first serve. Yes, the digit has already been changed/corrected using the method we published here.

PM me if you would like one along with your address and we will Paypal invoice you. Once payed, we will ship.

Cost is still $298.00... but truthfully may be going up (around $20.00) due to material cost increases very soon.

Thank you!

#337 4 days ago

I haven't checked mine yet, but if it has the goof I'm keeping it. It'll be worth way more down the road, like a mis-stamped penny!

#338 4 days ago
Quoted from dyopp21:

I haven't checked mine yet, but if it has the goof I'm keeping it. It'll be worth way more down the road, like a mis-stamped penny!

I call it the "Special 71,000 Point Bonus Edition"

#339 4 days ago
Quoted from dyopp21:

I haven't checked mine yet, but if it has the goof I'm keeping it. It'll be worth way more down the road, like a mis-stamped penny!

Prototype is staying. great conversation piece

#340 4 days ago

Fix it in the code! Done all the time.

#341 3 days ago
Quoted from Outsidedge:

We have 6 finished High Speed Hardtops ready for shipment. We are NOT turning on the website for another 30 days or so... but if you would like one of these it's first come first serve.

Received mine yesterday. Looks great!
Thanks! I hope you continue to make these great products.

#342 2 days ago

Got my HS Hardtop yesterday. Many thanks to all who were involved!

Promoted items from the Pinside Marketplace
2,400
Machine - For Sale
Cincinnati, OH
$ 164.99
Lighting - Led
PinballBulbs
$ 109.00
Cabinet Parts
Tilted Pinball
$ 15.00
Playfield - Decals
Metal-Mods
$ 20.00
Electronics
Yorktown Parts and Equip
From: $ 16.95
$ 10.00
Cabinet - Sound/Speakers
Gweem's Mods
$ 29.99
Eproms
Matt's Basement Arcade
1,400 (Firm)
Sale Pending!
Carlisle, PA
Trade
Machine - For Trade
Sandusky, OH
$ 19.99
Eproms
Matt's Basement Arcade
There are 342 posts in this topic. You are on page 7 of 7.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside