Love the name of the project! Good luck , keep us updated.
You're currently viewing posts by Pinsider RampShot11.
Click here to go back to viewing the entire thread.
Quoted from johnwartjr:The cleaning solution has been used for more than just 1 wiring harness
I want one of those ultra sonic cleaners. They look awesome.
Hi John, I just bought an ultrasonic cleaner and was wondering if you can clean lamp boards in it without damaging them? Figured you would know. Btw I am loving this thing so far. It does a great job cleaning small brackets and flipper parts. Thanks.
Quoted from Coyote:I have, no problem. On boards that've been suspected to high-heat I wouldn't recommend it though - I've had masking and traces come off.
So should I no heat the water when I put them in the cleaner? The lamp boards I have look fine but just very very dirty. Black dust is imbedded into some of the boards. Thanks.
Quoted from Coyote:Lamp boards should be fine - do 'em in heated water. Other boards (like my original Opto boards) had too much damage under the 1/2w resistors that the traces were destroyed in the cleaner.
Ok thanks. I have some doubles for my JD, so maybe i'll try it on a couples spares first.
Quoted from johnwartjr:Ramp is heavily blown out. When I strip it down, I'll clean it up and reasses. Wanted to order the ramps while I could find them, because if I wait until I need them, they may not be there
That is a good point. Seems like plastic ramps are getting harder and harder to obtain.
You're currently viewing posts by Pinsider RampShot11.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/project-yabba-dabba-doo-adventures-of-first-time-operating?tu=RampShot11 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.