That door is more that presentable, nicely done, that saved ya about $90!
You're currently viewing posts by Pinsider Atari_Daze.
Click here to go back to viewing the entire thread.
Quoted from TractorDoc:but I cannot even find it on another completely assembled coin door on another machine.
Is it the little wire that goes inside the coin mech?
20181029_213622 (resized).jpgQuoted from FatPanda:Here's the wire gate on my Beast's lair
Hmmm, looks like we have a winner!
Quoted from TractorDoc:I am going back and forth between pulling the cabinet side rails to clean them up and leaving them.
I was typing a great encouraging reply to your quandary, then saw page two,
I knew you could do it!
Quoted from TractorDoc:first attempt at airbrushing
First lemme say I'm far from an artist, so don't need fancy stuff. I tried two different styles of the airbrush you picture and for simple non shading touchups, I ended up using this one:
https://www.harborfreight.com/quick-change-airbrush-kit-93506.html
The style you show I found clogged WAY TOO often for the way I paint. I'm sure there are tips and tricks I don't know on how to use them but for the one in link I posted, I've had 0 issues. Just my . . .
2 cents (resized).jpgWhat did you thin it with?
I've heard people use windshield washer fluid but I always buy the rainex type, don't think that would be a good one to use.
I really enjoy watching you jump in with both feet on these projects. The depths you go to are an inspiration!
Quoted from TractorDoc:Those depths include admiring your work -- I just hope I have the lung capacity to make it back to the surface!
Thank you, I've yet to see you get in over your head!
Quoted from TractorDoc:If you've noticed the gold hued leg bolts do not worry, they are not staying.
I actually almost said something but figured I missed you addressing this earlier, I did not figure you had intended to stick with these monstrosities on such a thing of beauty. Thanks for clearing that up!
Quoted from LynnInDenver:Have you considered vinyl dye?
I often use RIT clothes dye on my nylon, not sure if the pop bump bodies are same chemical makeup as Nylon though.
https://pinside.com/pinball/forum/topic/polishing-up-a-silverball-mania#post-3795182
Sample image attached from Motordome, link from SBM.
20190129_205016 (resized).jpgQuoted from TractorDoc:Just the dining room table taken over by cleaned and rebuilt parts.
Dining rooms are overrated! Just call it the work room, problem solved!
You're currently viewing posts by Pinsider Atari_Daze.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/project-paragon-breathing-life-back-into-the-beast?tu=Atari_Daze and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.