Hi guys and girls,

Here are some more product photos as well as an installation guide and images.

Thank you for looking.

Kevin and Keith

Here is an image with the protective paper applied in order to show the product more clearly.
IMG_0129.jpg

Without protective paper installed
IMG_0136.jpg

IMG_0137.jpg

Installation guide:

Remove 4 head bolts
IMG_0183.jpg

IMG_0164.jpg

Remove protective paper from HeadBanger and apply to cabinet head. Be sure to handle by the edges in order to avoid finger prints on the inside surface of the panel.
IMG_0167.jpg

Re-insert 4 head bolts
IMG_0173.jpg
IMG_0170.jpg

Tighten nuts to secure.
IMG_0182.jpg

And that's it! Time to stand back and admire your new HeadBangers.
IMG_0163.jpg

We have had several inquiries regarding HeadBangers for Stern Pinball games and we have been working to get these done as well. We had plans to release these after we return from the Pin-a-go-go show this weekend but we wanted to let everyone know that we will have a limited number of Stern HB's with us at the show.

If you would like a set which includes free delivery to the PAGG show this weekend please let us know with an order in advance so that we can guarantee that we have a set for you.

We have included a few pictures installed on a Stern below. Please note that these will fit Stern backboxes with the 2 light brackets bolts in the head. We will have a version for the metal backbox style game (Star Trek, Mustang) coming soon as well. Installation is very similar to the Williams/Bally games.

P.S. We have WPC swing-out door style Headbangers for Fish Tales, TOM, etc. as listed though we did not highlight them on the info sheet above. So if you need a set for the Earlier WPC games we've got you covered.

We will have these available delivery at the Pin-A-Go-Go Pinball Show on May 16-18-2014.
Show pre-orders will be available at an introductory price of $45 (10.00 off) for show pick up.
Orders must be received by Monday 5-12 12:00pm Pacific Time.
To pre-order please send payment via paypal to: [email protected]

Thank you for all of your interest and input.

Kevin and Keith

IMG_0195.jpg
IMG_0187.jpg
IMG_0197.jpg
IMG_0199.jpg

Monday morning bump for pre orders ending today for those who may have missed it.

We are offering free installation of HeadBangers purchased for games at the PAGG show this weekend.

See you at the show!

Kevin and Keith

Lower cabinet protectors have been considered as well though we are not sure how practical they would be when it comes to shipping.

Hey Pinside. If you're at PAGG you can see Headbangers at Rob Anthony's booth.

Big thanks to Rob!

Thanks for the questions guys. Heat is not an issue with these protectors. The melting point for acrylic is approx.320 degrees so unless you have thousands of lights in the head of your game you do not have to worry. You also will not have a issue of the protectors turning into sandpaper. Since the protectors attach with the exsiting hardware and do not move indepentldently of the head they will not have room to slide around and hurt the artwork.

Thank you
Kevin

We recommend that you clean your cabinet art with a product such as Novus1 and remove any "sand, rocks, or other debris" that you may have stuck to the side of your cabinet before installing and you will not have any issues. I am not quite sure how sand would make it's way in as the biggest threat here is in a buildup of dust on the games exterior.

There is a much larger amount of dirt on the playfield and inside the machine than the exterior gets exposed to and we have not seen this as a major problem with plastic protectors which come in contact with the screened, art side of playfield plastics. That being said, this has not been an issue.

Thanks for your concern.