Problem Sound Speech System 11

(Topic ID: 198369)

Problem Sound Speech System 11


By McPin54

10 months ago



Topic Stats

  • 7 posts
  • 4 Pinsiders participating
  • Latest reply 10 months ago by McPin54
  • Topic is favorited by 2 Pinsiders

You

Linked Games

Topic Gallery

One image has been uploaded to this topic. (View topic image gallery).

20170920_075135 (resized).jpg

#1 10 months ago

I have an Elvira and The Party Monsters that I just got back up and running with help from all you great pinsiders on another thread.
I was so happy today to come home any finally play it when I had a drop target opto not registering. I took the assembly out from underneath the playfield to clean it up and fix it. After putting it back together and back into the game I powered on the machine and I have no music, just speech. All the sounds were working minutes before I did this. I have no idea where to start on this one. What the heck could I have done by messing with the drop targets?!?!?! Speech but no music? Any help on where to start is much appreciated.

Thank you.

#2 10 months ago

Check your 12 volts at the power supply.

#3 10 months ago
Quoted from GRUMPY:

Check your 12 volts at the power supply.

Just checked it. Everything measures as it should.

Thank you

#4 10 months ago

No 12V = no CPU boot on Sysyem 11, with the game booting, there has to be 12V from the power supply.

Reseat all the cables going to/from the sound board in the upper left of the head.

Does the game give a quick beep or series of fast beeps on power up? That is the sound board diagnostics giving an "all's well" or error code.

--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com

#5 10 months ago
Quoted from Borygard:

No 12V = no CPU boot on Sysyem 11, with the game booting, there has to be 12V from the power supply.
Reseat all the cables going to/from the sound board in the upper left of the head.
Does the game give a quick beep or series of fast beeps on power up? That is the sound board diagnostics giving an "all's well" or error code.
--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com

Rob,

You are the Super Hero of Pinball Tech!

After your post I thought maybe I'll try swapping out the ribbon cable between the two boards . That was the problem!

Thanks once again!

20170920_075135 (resized).jpg

#6 10 months ago

What was the problem that fixed the game to not reset

#7 10 months ago
Quoted from tonyhoff1:

What was the problem that fixed the game to not reset

It was the slam tilt switch.

Totally overlooked it.

Promoted items from the Pinside Marketplace
Wanted
Machine - Wanted
Plainfield, IL
$ 22.00
Electronics
Yorktown Parts and Equip
From: $ 42.00
Cabinet - Shooter Rods
ModFather Pinball Mods
£ 99.00
Playfield - Toys/Add-ons
PinballToys
$ 18.00
Electronics
Yorktown Parts and Equip
From: $ 16.95
€ 95.00
Lighting - Led
FlipperLED
From: $ 210.00

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside