Did I read that this is your first game? Not sure if your new to pinball or not. I would suggest the water thin super glue fix to at the very least level up the chipped inserts. There are quite a few posts about it over on RGP. Level the playfied, take your time, don't fill them all at once, maybe 2 to 3 applications depending on how deep each area is, sand with 2000 grit, Novus 2, wax. Dries clear, keeps the ball from making strange turns on you. This will also give a smooth surface to apply new decals etc. I used this method on an Addams I had and it worked well. Good luck!