Sounds like the machine needs a shop job and the reset issue cld b a easy fix or cost 100.00 to send the board out (last resort). Depending on cab fade/condition and playfield id guess 4750-5k wld be a fair offer since it needs lots of tlc.
You're currently viewing posts by Pinsider bigd1979.
Click here to go back to viewing the entire thread.
Sounds like the machine needs a shop job and the reset issue cld b a easy fix or cost 100.00 to send the board out (last resort). Depending on cab fade/condition and playfield id guess 4750-5k wld be a fair offer since it needs lots of tlc.
Quoted from opensourcepirate:The upper playfield works great - with the caveat that the balls will get stuck on the right side instead of draining down. I'm assuming that's not too hard of a fix.
Also all of the rubber is pretty worn and should be replaced. I don't know if that would help up there, or if it's just a leveling issue.
Game is gonna need a shop job . Post some pics but the game sounds good overall and with what tz"s have been selling for latley , if u can get it for 4500-5 (Depending on pics of overall condition) that wld be a ok deal these days lol..
Quoted from Yoski:Then you still have a 25 year old board with largely 25 year old components on it. As with most things, electrical components are not like fine wine, they don't get better with age. Besides, electrical engineering has come long ways in the past 25 years.
But yes, in most cases a new rectifier and capacitors would fix the problem.
Ive had better luck with older boards than the new ones lol...
You're currently viewing posts by Pinsider bigd1979.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/price-check-dirty-twilight-zone-that-resets?tu=bigd1979 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.