Anyone happen to be holding onto a set of plastics for dracula? Or know where i can find some? Im try to bring one back from the “grave” and i noticed im missing a ton of plastics. Any help is appreciated.
You're currently viewing posts by Pinsider spinneraddict.
Click here to go back to viewing the entire thread.
Anyone happen to be holding onto a set of plastics for dracula? Or know where i can find some? Im try to bring one back from the “grave” and i noticed im missing a ton of plastics. Any help is appreciated.
Wow, this may turn into a bigger headache than i thought. I found the passive pop bumper. But my searches aren't giving me anything on the left slingshot arm. Is there another manufactures part someone has used and it worked?
I found this one
https://www.pinballlife.com/data-eastsegastern-slingshot-arm-and-tip-assembly.html
Would it work?
In between finding everything broken, i decide to do a quick playfield cleaning. I think it looks ok for sitting for 10+ years. Some wear at top by flipper and passive bumper. Im almost sure it will never fire up even tho the boards look pretty clean. I did notice the varistor is blown on the ac line coming in tho.
F971AE4E-E9A3-401E-AD5A-41CFC0462880 (resized).jpegOk... put back together my dracula.. changed all the fuses, connectors. Looked good. Upon powering on i keep blowing the f2 fuse on the rectifier board. Where would i go from here?
Thanks
Anybody happen to have a working SB-100? The board in my Dracula seems to be shorting out and I can’t find where.
Quoted from bluespin:Are the ones that barakandl sells through his nvram-weebly business compatible with SB-100 or only SB-300? When you find a working/new board make sure to buy a new wiring harness from nvram-weebly as they are almost always a problem, and cheap to replace.
Im not sure which ones it’s compatible with. I did already get the new harness, was hoping that was it.
I have a stern Dracula, I have a new rectifier, driver and mpu board. I’m getting a reading of 16 on the 12v test points and I’m having issues with the game. What would cause it to be so high and would that give me issues? Any help is appreciated.
Thanks
Quoted from dothedoo:The 12V source is unregulated. I wouldn't worry about the 16V reading.
What issues are you having?
Some resets and my sound is cutting off at game start. Was hoping that was the issue
Anyone own a dracula? I could use a pic one the fuse under the playfield. I have 2 blue wires. One has broken off and the other is soldered to the left side of fuse. Cant seem to see where the second blue wire went. I do know i have no flippers or pop bumbers firing now.
Thanks
Quoted from vec-tor:Tie the two blue wires together.
I did. Still not getting any flippers or bumpers. Was working fine before. Fuse is good.
You're currently viewing posts by Pinsider spinneraddict.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/price-check-1980-sterns-quicksilver-stargazer-seawitch?tu=spinneraddict and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.