Folks
I got a Meteor and a Quicksilver.
When I turn them on both of them boot up ok but hang with a sound playing. Press start starts the game and the sound goes away but I just wondered why this is happening and can I fix it?
You're currently viewing posts by Pinsider neilmcrae.
Click here to go back to viewing the entire thread.
Folks
I got a Meteor and a Quicksilver.
When I turn them on both of them boot up ok but hang with a sound playing. Press start starts the game and the sound goes away but I just wondered why this is happening and can I fix it?
Am in the nine ball club. Does anyone know if there is a playfield for this? I don’t need it but with my quicksilver and soon meteor about to get a new play field I will want to do nine ball.
Anyone done any maintenance on sound boards? In my meteor and quicksilver when the game is turned on there is a drone noise that never stops. Doesn't do it on my Nine Ball. Wondering if I can fix it? Start a game and the sound is gone.
Quoted from tomdotcom:I own Meteor, the drone never goes away. It's supposed to be there. It gets higher and higher pitched the more you score. It can't be shut off, that I am aware of.
no. This is when you turn the machine on. Nobody playing. When I start the game, yes I get the sounds of the game, but when the game is over the machine is silent.
Quoted from cottonm4:Is he selling for the (that symbol) 18,000 or is asking the 18K price?
its on ebay for 18K BIN!
been on for months.
My quicksilver doesn't have a post where the drops are but I can't understand why they would add it, It gets a lot of abuse and the star post on my went and took the plastic above it with it.
Folks
I've got an Ali and the flippers on it seem strange.
Does Ali have the same setup as Nine Ball / Quicksilver? We think the flipper base plates might have been changed...
Could someone take a picture of their underside?
Neil.
Quoted from slochar:No, Ali has the earlier type 1 flipper mechs in them, shorter bushing, flat plate, shorter bat shaft. The change to the offset baseplate type occurred sometime during the production of Big Game.
do you know where I can get all the parts for that? Pretty much think I need the entire mechs for both flippers?
Neil
Quoted from chuckwurt:Mirco has the nine ball playfield you seek.
yeah I just saw that and ordered one!
Neil.
Quoted from Flynnyfalcon:Hey all, my son is embarking on becoming the next Jack Danger. Still some ways to go This week we shot my recently restored Stern Quicksilver.
Given he's only just turned 7, it's more directed towards kids, but you may enjoy also. There's a couple of decent games in there, haha.
If you're kids like pinball, please subscribe and show them the link.
fantastic! Lovely quicksilver!
Neil.
Quoted from cottonm4:Number 15 is the last set I have. And you are.....# ??
sorry- I may have screwed up - how do I order?
Quoted from Lovef2k:Taking a poll here,
How many would be interested in a repro set of the SEI coin door trim set? 2 or the 3 hole option. I myself am having a hard time finding them in good condition.
Hell yes
Quoted from Tsskinne:Freefall got finished up early this morning and made its way to location this evening. Come check it out if your near Lafayette Indiana as it appears we are one of only a few locations with it anywhere in the world.
[quoted image][quoted image]
Awesome - We just got one that will be in the UK Open then at pinball republic in London!
I got lucky on an amazing find for a bargain of the century!
A2083BF4-CC03-4E67-BE0B-057B6A8FD07D (resized).jpeg24F659CE-AB9A-4DF4-B5E8-6190EF7FEA71 (resized).jpeg3A97AF94-8263-4CF6-897A-F87212B77265 (resized).jpeg
103DB51F-9C18-4766-82E2-1FF20C416E82 (resized).jpeg487256A9-62C6-4E3A-9787-723F25434A20 (resized).jpegA316A153-25F9-4CC5-B35A-1D52CCF92796 (resized).jpegYeah that’s on our list to fix, game is in our lock up - hoping the flipper mechs haven’t been butchered!
I'd personally go weebly as it has ability to have more code options. I'm using weebly in my Ali with LEDs all good.
Neil.
Quoted from gdonovan:Thinking about selling my completed playfield and backglass, have not decided yet.
[quoted image]
hit me up if you decide to sell!
As there doesn’t seem to be a freefall club my freefall has started to kick out two balls - sometimes at new ball kick out but it’s also done it mid game? I’m assuming something trough switch related but thought I’d ask here first?
ok so I have a stars with no chime unit.
Its got this weird french CPU board in it that does electronic sound (well it plays samples).
I really want to move to a weebly board as I run scorbit but I'm trying to figure out how I keep sound? Any one got any ideas?
Neil.
Quoted from slochar:You could put a WAV trigger in but you'd have to either change the software or do the Arduino setup.
I think I redid magic to chimes for someone a couple years ago.... kind of the opposite of what you're asking
yeah I think i'm SOL on this unless I can get a chime unit. The current setup works ok I just wanted to move to a weebly board as I have that as the standard in all my games now.
Neil.
You're currently viewing posts by Pinsider neilmcrae.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/price-check-1980-sterns-quicksilver-stargazer-seawitch?tu=neilmcrae and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.