So I'm a new pinhead (absolutely love this site)... I was cleaning my machine (I've had it a whopping 4 days) and when I was done I noticed the solenoid that kicks back the balls into play was hanging by it's wires and the entire bracket had come off. So after I passed out, I reattached all the screws back in with the spring and the piston back into the solenoid. I ran a solenoid test and my first 7 solenoids are not firing. So now that I'm into cardiac arrest, I will take any advice. How bad did I mess up my machine?

Now that I'm breathing I will be checking the fuses tonight. I will let you know how it goes. Thanks as always guys!

Originally, I thought the wh20 would be buried with me many years from now. I'm starting to think this time may come sooner than I thought.

Thanks Tom! I actually decided to call a local pinball guy to come out and check things out. I'm concerned that I'm not pulling out the playfield properly. Literally, the entire bracket with all 4 screws came out of the particle board. I'm hoping that he show me a few pointers and get this issue resolved. It's more of a tutorial for me than anything else. I'll let you guys know how it turned out.

You guys were spot on! It was a blown fuse (two actually).. Working great now. Thanks to everyone who responded!