(Topic ID: 53809)

Pre-orders TRON LE apron for Pro flasher kit back in stock.


By HOOKED

6 years ago



Topic Stats

  • 13 posts
  • 9 Pinsiders participating
  • Latest reply 6 years ago by HOOKED
  • Topic is favorited by 2 Pinsiders

You

Linked Games

#1 6 years ago

Back in stock

Simple add on kit to the metal LE apron available at pinballlife.com.

No solder - no permanent changes needed to make this work. Runs on factory software.
15 min install.

Vid Kit one:
Dual Tie in where the apron lights go off opposite of each of the lower ramp flashers and the opportunity to tie in to the two blue rear flashers that pulse during game play (not filmed yet) $48 Shipped..

Second vid to be posted LE KIt:
Tie in to the back box kit will work off of the factory code. Push in two wires route the wire to the apron (will have plenty of slack) and attach to underside of the apron. There are quick connects to attach it all and for easy disconnect if ever the need arises. $48 shipped

Prices include shipping anywhere in the US.
To order email me at robertcampbell2@hotmail.com subject line Tron Kit 1 or Tron LE kit
Thanks!

#2 6 years ago

That's pretty neat. You got my attention!

#3 6 years ago

$43 pre- order TRon LE kit sold out.

#4 6 years ago

I'm in as this makes the PRO even closer to the LE

#6 6 years ago

** pre- order sold out***
Will re-post for orders once back in stock making a contact list still.

To be in on the pre-order price you can prepay or just email me subject line Tron apron mod
robertcampbell2@Hotmail.com
Prepaid will be shipped first.
Once wholesale orders are filled price may go up a bit. I just had to reorder connectors and splitters.
Will be available at PBL shortly.

#7 6 years ago

Im in like Flynn. Thanks!

#8 6 years ago

This sounds very cool. How do you get the decals for apron? I see the metal apron and the blue windows on pinballlife. What else would I need for this? Thanks

#9 6 years ago
Quoted from pinhacker71:

This sounds very cool. How do you get the decals for apron? I see the metal apron and the blue windows on pinballlife. What else would I need for this? Thanks

The decals seem a bit hard to come by lately, the places that would typically have them have been sold out for a while. I had a spare set that I sold to a fellow pinsider last week. As for what else you'd need, I created a thread earlier this year showing the stuff you'd need to put in an LE style apron in a Tron Pro:

http://pinside.com/pinball/forum/topic/tron-pro-my-new-tron-le-style-apron-check-it-out

Basically you'd just need the apron, blue inserts, mylar strips for apron, and arch retaining brackets / screws. If you can't get decals just use the ones from your Pro apron (but you would have to trim the main decal in the center of the apron to fit the LE metal apron).

All of the additional stuff is for the wiring harness, and for $43 I'd definitely buy the kit that Hooked is putting together. You can do it yourself, but for $43 I'd save the time making your own harness. As Hooked mentions, all you'll need to do is push in two wires into the main board in the backbox and one in for power. Simple and done, and for the price it's worth it (by the time you order the parts, pay for shipping and build it yourself the $43 will seem like a bargain - trust me, I've done it!).

#10 6 years ago

We may have the triangle decals that go around the plastic inserts coming soon. They won't be original LE triangle decals but they will be very close. Ill post once theyre available.

#11 6 years ago

LE kits (back box tie in) pre-orders have been sold out.
When back in stock I will post again but the price has been bumped for cost.
When I first posted it was a duel splitter under the pf now I have had to add for three connectors and 4 foot of wire (so you can slide out the PF without disconnect).
New price will be $48 shipped.

#12 6 years ago

one HS notice : on all the videos i see of TRON pinball, nobody had changed the 2 flashes of the under backbox... in fact, i did not understand why STERN set these in blue !?

the right ramp is yellow, OK logical
the left ramp is blue, OK logical
but that backbox !?

and than, i put them white, with white caps, and i feel its way better as it (but may be my brain is damaged)

...

3 weeks later
#13 6 years ago

Standard kit comes with 906 flashers but can be changed to whatever you wish.
I choose to use flex head style for my personal use but both look great.

Promoted items from the Pinside Marketplace
$ 399.95
7,000
Machine - For Sale
Cibolo, TX
$ 45.00
Cabinet - Other
...redshiftLED
From: $ 5.00
Cabinet - Other
Rock Custom Pinball

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside