Hello Pinsiders! I have just recently purchased a Bally Power Play and it has a nasty problem. The saucer kick-out hole is just way too strong. The previous owner had installed a new MPU bard and driver board (appear to be Rottendog). The playfield was mylar-ed at an early point as the paint is almost perfect (has some bubbles though so it's gotta go). The saucer hole is pretty worn from the pop bumpers though. Whenever a ball goes in it scores correctly but ejects into the glass!! It seems to be the correct eject assembly, I did take the relief spring off but it seemed extremely tight, looks stock, have no idea how tight that's even supposed to be. Thanks in advance for any help!