Hello, as happens with many, what started as one, is now twelve. When I start thinking about the time I spend walking down the row flipping on and off power switches, it might actually start adding up. Knowing I can't be the first one to think of this, thought I'd throw out a post to see if anybody has any good product solutions, etc. I know on my audio equipment higher end Monster power components, there are delayed circuits, but I have no idea if a pinball machine (mostly new machines, but a few older ones with ugly power supplies) needs something quite as sophisticated. I don't want to daisy chain power strips as have always heard that's a no-no. Thought about using three power strips each plugged into their own remote control switch (like for turning on and off outdoor Christmas lights), or even a Lutron smart switch, but I'm no electrician so just want to make sure I'm not doing anything to damage the machines or start a fire. Currently have about 3-4 machines per power strip, but I still turn them on/off at the machine vs the power strip level. Any thoughts appreciated!