Well, the train issue was resolved. Out of town yesterday, but getting around the installation today. Got a question for Robert or anyone else that may be able to answer.
Transferring over the coin door parts, and there's a slight difference between the door I got in Robert's handy exchange program and the door I took off / will be sending back.
There's what I assume is a ground wire next to the volume/service menu control that was attached to the original door with a nut over a little bare threaded bit that sticks out.
IMG_8888 (resized).JPG
The door I received doesn't have that threaded bit.
IMG_8890 (resized).JPG
No big deal to me, but of course I want to attach that ground wire. I assume I can just use some screw or bolt to connect it, but I'm wondering about the powder coat preventing a proper ground. Should I scrape off a bit of the powder coating near the hole to ensure a proper connection, or would the act of screwing in a bolt fr some sort force a good enough connection as it (I assume) scrapes off the powder coat on the inside of the hole as it turns in?