Black Hole
Gottlieb, 1981
Dogies
Bally, 1968
Four Seasons
Gottlieb, 1968
Meteor
Stern Electronics, 1979
Show Boat
Gottlieb, 1961
Strikes and Spares
Bally, 1978You're currently viewing posts by Pinsider girloveswaffles.
Click here to go back to viewing the entire thread.
Quoted from Captive_Ball:Manufacturer: Williams
Game/Type: Jungle Lord / SS
Year: February 1981
Production: 6,000
Cost: $349.99 obo
Location: Myrtle Beach, South Carolina
Link/Contact: ebay.com link » Untested Jungle Lord Pinball Game Unrestored Condition
Want! But it's "local pick up only" and I'm almost as far away as you can get from there in the lower 48.
Manufacturer: Williams
Game/Type: Disco Fever SS 4 Player
Month/Year: August 1978
Production: 6,006
Cost: OP: $113.50
Location: Bryan (Toledo), OH
Link/Contact: ebay.com link: Disco Fever pinball machine Williams
"Up for your consideration is this Disco Fever pinball machine. Machine does not work. Being sold as non working project. Cabinet has some scratches."
Check out pictures for condition. Don't miss out on this collectible machine.
Quoted from RyanClaytor:Project Price (from Mr. P):
----------------------------------------------------------------------
Double Barrel, 1961 Williams: $500
Works! Was serviced by the pinball expert on "Pawn Stars". Playfield in good shape. Backglass needs some attention. Have original schematics and keys.
Jack Phone: 323-445-1449
Long Beach, California 90802
----------------------------------------------------------------------
Looks like a cool game! Where's Colsond3 when you need him? "IF I WERE CLOSER!!!" Additionally, the "experts" from Pawn Stars had their mitts on it. Sooo...thoroughly shopped? *LOL*
Well at least this one is in my area.
Quoted from Captive_Ball:Manufacturer: Williams
Game/Type: 8 Ball / EM
Year: January 1966
Production: 3,250
Cost: $300 obo
Location: South Austin, TX
Link/Contact: austin.craigslist.org link
OP: Good condition for a fifty year old machine. All lights work, needs to be reset for a game to come up.
For $300 it looks quite nice.
Quoted from Pecos:Manufacturer: Bally
Game/Type: Flash Gordon / SS AS-2518-35 4 Player
Month/Year: May 1980
Production: 10,000
Cost: $600
Location: Patchogue (Long Island), NY
Contact/Link: longisland.craigslist.org link
Condition: Front cabinet and door a little rough. OP: "SITTING IN BASEMENT UNUSED FOR MANY YEARS. VINTAGE BALLY FLASH GORDEN PINBALL MACHINE. WORKING CONDITION. JUST NEEDS SOME MINOR THINGS LIKE A FEW NEW LIGHT BULBS"
Never mind the rust on the lock-down bar and coin door, or the bumper cap missing the center, or that at least one of the displays isn't working, or the beat up front of the cabinet including the door, or the missing flipper band, or ...
Playfield and backglass appear okay, but hard to tell just how good they are with the blurry pictures.
Quoted from RyanClaytor:Game(S!!!): 1969 Williams smart Set, 1969 Williams Superstar, Jukebox w/ 100 45's, 1970 Williams Ringer, 1945 Gottlieb Stagedoor Canteen, flipperless playfield "wall-hanger", and parts
Cost: Current Bid: $305 Ends next Monday
Location: Henderson, Illinois
Link/Contact: ebay.com link » Pinball Machines Jukebox And Em Ringer Arcade Game
OP: Son moving home so there goes my man cave. Up for auction is 3 pinball machines 1 rare em ringer arcade game, and a Wurlitzer juke box plus some parts and wall hanging playfield. 1969 Williams smart Set, 1969 Williams Superstar, and Jukebox loaded with 100 45rpm records, from the 50s to 90s, are all working and in good condition. 1945 Gottlieb Stagedoor Canteen was the first pinball machine made after WW2 and is complete in great condition minus legs and glass. Ringer is a super fun game that just recently stopped working. Boxes of extra parts nos and used, pinball tools , and pf wall art. Can deliver upon payment within 300 miles of 61439. PLEASE email me with any questions before bidding, and thanks for looking.
"Welcome home, Son! (Not that I'm bitter.)"
Sh*t! I'd buy all that just for the Ringer. Now if I had the room, the time and all that stuff wasn't 2000 miles away ...
Quoted from Captive_Ball:The 81' version is considered amoung EBD enthusiasts as the most desirable of the three runs, 81, 82 (LE), 84. The reason the number is $2800, is because many of the 81's are fully restored and can command $4-6K. The LE is considered the ugly duckling of the group. Still the same great playing machine, but it has the Rapid Fire cabinet. Same can also be said for Centaur and Centaur II.
So how much would one of these go for?EBD Early Production (resized).png
Quoted from girloveswaffles:So how much would one of these go for?
Quoted from Captive_Ball:Interesting displays in that game. Look like alphanumeric Gottlieb. There must be a story....do tell
Yup. Futuba alpha numeric displays. Here's the same machine next to an early production model:
Eightall Deluxe (resized).jpg
Quoted from PinFixin:That is the prototype Eight Ball Deluxe. Bally made 3 games during that time that were prototypes with the blue displays, KISS, Flash Gordon, and EBD. The KISS version had speech.
I don't know how many there are of each, but I would guess single/double digits. Is that one for sale?
-Pat
Probably not. It's part of the collection in Banning California. The picture is from two years ago (but it was still there back in January).
Quoted from Pecos:Relisted at reduced price.
**Price reduced to $50 - that can't be right! milwaukee.craigslist.org link
Probably meant $500, but the page is gone now.
Quoted from Captive_Ball:Manufacturer: Bally
Game/Type: Firecracker / EM 4 Player
Month/Year: July 1970
Production: 2,800
Cost: Starting Bid: $499.99 (No current bids) Auction ends Sunday
Location: Gladys, Virginia
Contact/Link: ebay.com link » Vintage 1971 Bally Firecracker Pinball Machine Latin America Mexican Theme
OP: This upright machine has the play counter at 72,457 and when it was moved into storage it came on in TEST mode only. It definitely needs new rubber, it has wear to the playfield paint, and the backglass paint as well. I am not sure what other work it might need and it is sold AS-IS for parts/repair. 1 of the 4 steel legs is bent, but I think those would not be hard to reproduce (and might possible be able to be straightened at a shop). I am not a pinball expert, so I cannot determine condition of the machine much further than that.
... never mind the rust and the missing apron.
Quoted from hoov:Pop a Card project in NJ (good player IMO)
Starting bid $199
Backglass fair - Ron Webb shows he has a repro Pop a Card BG in stock for $275
"seller says playfield nice, will put pictures up on ebay later"
"back door probably missing"
ebay.com link » Gottlieb Pop A Card Pinball Machine Complete But Need Tlc
Wow. How bad is the TOP of the playfield since the seller won't post one picture of it ? (but lots of pictures of the underside!).
And that back-glass is in awful condition.
Quoted from NicoVolta:Manufacturer: Bally
Game/Type: Skyrocket
Year: May 1971
Production: 545 (!)
Cost: $2500 obo
Location: New York, NY
Link/Contact: ebay.com link » Bally Skyrocket Pinball Machine Coin Op Arcade Pickup Only
Gotta talk down the price and get better photos though.
Yeah, if your selling a machine like this something more than one fuzzy picture of the back glass would be nice.
Quoted from Philk:location: Northern VA
make / manufacturer: Williams
model name / number: Space Shuttle
"Space Shuttle Pinball machine, needs minor repairs
owned for 30 years. Multi-ball play, OBO"
washingtondc.craigslist.org link
$450 obo, might not be a bad pickup if they are a little flexible and boards aren't too fubared
Minor repairs as in "The lights are on but nobody's home".
Quoted from Pecos:Manufacturer: Williams
Game/Type: Laser Cue / SS System 7 4 Player
Month/Year: February 1984
Production: 2,800
Cost: $400 "...would trade for another project machine in the late 70's or early 80's."
Location: Bradley (San Luis Obispo), CA
Contact/Link: slo.craigslist.org link
Condition: "... it is working mostly but I would still consider it a project machine, I have repaired many items on it but I am ready for a change."
Uh, it's a Laserball, not Laser Cue. I'd Still buy it thou.
Quoted from ForceFlow:Reduced to $150 OBO
Somebody grab it before the owner parts it out
ebay.com link
Now if only it wasn't on the opposite side of the country ...
Quoted from RyanClaytor:^^^ girloveswaffles !!! ^^^
...also...Now I have to figure out what to do with all my knock-off games missing their certificates of authenticity.
Very tempting. Only 35-40 Miles from me. From what I can see of the play field, it looks like it's in nice shape. Even the bumper caps look like they're okay. The cabinet and Back Glass look so-so, but it's hard to tell the overall condition from those photos.
Quoted from Pecos:Manufacturer: Bally
Game/Type: Motordome / SS 6803, 4 Player
Month/Year: June 1986
Production: 2,000
Cost: $650
Location: Happy Valley (Portland), OR
Contact/Link: portland.craigslist.org link
Condition: "I am selling a Motordome pinball in good shape. It was a few minor issues. A few lights are out, one of the bumper caps popped off, and one of the rubber targets came off. Also selling a Rollergames pinball and would sell both for $1900."
"Both" ?
You're currently viewing posts by Pinsider girloveswaffles.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/post-project-pins-for-sale-here-cl-ebay-pinside-and-others?tu=girloveswaffles and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Norwalk, CA
