Black Hole
Gottlieb, 1981
Dogies
Bally, 1968
Four Seasons
Gottlieb, 1968
Meteor
Stern Electronics, 1979
Show Boat
Gottlieb, 1961
Strikes and Spares
Bally, 1978You're currently viewing posts by Pinsider Bortino.
Click here to go back to viewing the entire thread.
Manufacturer: Stern
Game: Meteor
Production: 8362
Cost: $500
Location: Edmonds, WA
Link/Contact: seattle.craigslist.org link
OP: Missing solenoid driver board, and playfield is quite worn. I do not know the status of the other boards, hence selling as a project. Plastics and everything else seem to be in good shape. Backglass is in good shape. Other games in picture are not for sale.
Manufacturer: Gottlieb
Game/Type: Paul Bunyan / EM
Month/Year: 1968
Production: 1900
Cost: $350
Location: Puyallup, WA
seattle.craigslist.org link
OP: Works. Needs cleaning and glass top
Manufacturer: Williams
Game/Type: Superstar / EM 1 player
Month/Year: 1972
Production: 3,801
Cost: $300 obo
Location: Everett, WA
Link: seattle.craigslist.org link
OP: I don't know much about it other than it's in not moving with me. Works. $300 obo
Pinball Yard Sale
Projects $50 and up or BO
Sinbad Pinball
Hurricane Pinball
Spy Hunter Pinball
Austin Powers Pinball
Lightning Pinball
Location: Seattle, WA
HUGE ARCADE AND PINBALL YARD SALE THIS WEEKEND. Dozens of pins/arcades/other coin-op priced to move.
615 Bright St NW
Seattle WA 98107
Saturday/Sunday 10-2pm.
Manufacturer: Williams
Game/Type: Ski Club / EM
Month/Year: 1965
Production: 550
Cost: $600
Location: Chehalis, WA
OP: It is an older machine and it still works. It does however need a little bit of love. Just general maintinance stuff that any working pinball machine would require over time. No Trades Cash Only
Anybody every played this game?
Flash and Genie, sold as a pair
Manufacturer: Williams
Game/Type: Flash / SS 4 Player
Year 1979
Production: 19,505
Cost: $500
Location: Seattle, WA
Manufacturer: Gottlieb
Game/Type: Genie / SS 4 Player
Month/Year Oct 1979
Production: 6,800
Cost: $500
Location: Seattle, WA
OP:Selling two vintage pinball machines. Williams FLASH & Gottlieb’s GENIE. Both machines is good condition, and they both power up, but won’t play cycle correctly. I replaced one board in Flash and that fixed the problem, but now they both need a tune up. I have over $1,500 in these and am only asking $500 each or $1,000 for the pair. Sold as a pair. I can help load them.
Manufacturer: Bally
Game/Type: Doctor Who / SS 4 Player
Month/Year Sept 1992
Production: 7,752
Cost: $2300
Location: Silverdale, WA
OP:
The bad:
2 coils are locked on (outhole kicker and knocker).
controlled lights are not turning on
flippers are inop (but they are complete)
hole in topper cover
The Good:
2 brand new flipper opto boards
Playfield has no wear and the Time Expander works.
All other coils and switches are working (except what is listed above).
The cabinet has the normal nicks and dings.
I can throw in a new start and launch buttons and a rubber kit.
Manufacturer: Williams
Game/Type: Tom Tom/ EM 2 Player
Month/Year: Jan 1963
Production: 1,300
Cost: ?
Location: Seattle, WA
Estate Sale 11/9, 11/10
Manufacturer: Williams
Game/Type: Demolition Man/ SS
Year: Feb 1994
Production: 7019
Cost: $300
Location: Longview, WA
OP: need gone may need a cleaning call a anytime .. ask for clark
Quoted from bluespin:The ad was already down when I tried to look at it. New cpr playfields were how much $900? A lot of people have been looking for a cpr playfield set for this title. Fully working versions with heavily worn playfields sell for $1500-1700 within a week usually, so if the game was mostly complete and $1700 or less it was a bargain.
Flash Gordon back up. $2000 OBO
ME: reminds me of a lot of car projects. Lots of unknows. Worth less than the seller thinks.
PNW pinball classified on facebook. William's hyperball. Doesn't work $50.
https://www.facebook.com/groups/pnwpinball
Op: non working hyperball for someone that wants to take on a new project. I picked up 4 years ago packaged with two other pins. No information on issues. Doesn’t power up.
Black Hole Pinball Project - $500
seattle.craigslist.org link
Oper: selling a Black Hole pinball project. It is a heavy project so please be warned. Needs boards, and bottom playfield has been cut funny. Would recommend a Pascal replacement board just to start. Cabinet has some gouges. $500 cash.
not mine - Previous owner cut the wings off the lower playfield. Comes with glass and lock bar.
Manufacturer Stern
Game Cheetah
Location Kaposin, south of Tacoma, WA
Oper Make reasonable offer. Powers ups, makes sound, shows numbers, but no gameplay.
Me is this game really worth $5K?
seattle.craigslist.org link
Williams
Grand Prix
Port Orchard, WA
$500
OP - could use a new back glass but definitely playable. This machine is a project and will need a good tune up as it has been been sitting a while.
Spin wheel
Gottlieb
Tacoma, WA
$420
OP
Project Machine. Don't have time right now and need the space.
Lights up, plays, rings, and scores as normal. Spin wheel is advancing one section at a time and scores various amounts correctly. Moving to players 2, 3, 4 is sticky even after I cleaned the stepper unit a while back. Needs a new lock bar and unit. The backglass is average and has been touched up some. The playfield is awesome! No broken plastics. Comes with schematic and new rubber set.
Chicago Coin
Super Flipper
Project
Multnomah Co, OR
Oper- 1975 Super Flipper Pinball Arcade Machine. Looks complete and in good cosmetic condition, project untested as is. Trade for project pinball machine or cash offer.
Me - looks like Pong meets pinball.
seattle.craigslist.org link
Stern
Freefall
$1000 OBO
Silverdale, WA
Issues with two of the players score displays
Based on the pinside average this one is a bargin
#Satin Doll
Manufacturer: Williams
Location: Mcminnville, OR
Cost: $225
Oper - Have a (satin Doll) pinball missing BG and back door complete otherwise rebuilt chimes ,rebuilt pop bumpers..most all new bulbs -leg levelers , nice legs nice plastics PF 8.5-9 nice and shinny no real ware ..all inserts releveled... all new rubber,,all new flipper sleeves, plays like it should,, no rust.case was painted a funky black-yellow
Rocket III
Bally EM
1967
$600
Wenatchee, WA
Oper:
Rocket 3 pinball machine ,Good playfield, plays and all lights work could use a tune up it will not take coins ect. first $600.00 takes it. Also included original schematics, You move
You're currently viewing posts by Pinsider Bortino.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/post-project-pins-for-sale-here-cl-ebay-pinside-and-others?tu=Bortino and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Warren, OH
Ottawa, ON