(Topic ID: 138626)

Post Project Pins for sale here - CL, eBay, Pinside and others

By Pecos

8 years ago


Topic Heartbeat

Topic Stats

  • 26,602 posts
  • 787 Pinsiders participating
  • Latest reply 3 hours ago by bluespin
  • Topic is favorited by 721 Pinsiders

You

Linked Games

Topic Gallery

View topic image gallery

Screenshot 2024-07-19 at 12.02.27?PM (resized).png
20240713_122457 (resized).jpg
20240711_094450 (resized).jpg
20240711_094502 (resized).jpg
20240711_094455 (resized).jpg
20240711_094443 (resized).jpg
20240711_094440 (resized).jpg
20240711_094425 (resized).jpg
20240711_094412 (resized).jpg
20240711_094433 (resized).jpg
IMG_4117 (resized).png
IMG_4116 (resized).png
IMG_4118 (resized).png
PXL_20240707_044830926 (resized).jpg
PXL_20240707_044817843 (resized).jpg
Screenshot_20240704_162445_Chrome (resized).jpg

Topic index (key posts)

2 key posts have been marked in this topic (Show topic index)

There are 26,602 posts in this topic. You are on page 528 of 533.
#26351 50 days ago
Quoted from ForceFlow:

I found it odd too that the voltages were identical--usually when new transformers are made, it's because there's a change in voltages.
I checked various schematics of MPU-100 and 200 games. The voltages were the same, though the appeared in a different order on the schematics, and the 49VAC voltage was erased on some MPU-200 game schematics, leaving only the 4 visible.
Keep in mind that all the stern games used the same TA-100 rectifier board layout & component values in all the game titles (even though there was an earlier blue and later green board--they basically just updated from 70s era components to 80s era components).
The difference between the two transformers just appears to be the amperage capacity on the 49VAC circuit.
[quoted image][quoted image][quoted image][quoted image]
I also double-checked my original copies of Dracula, Seawitch, and Flight 2000--they are the same as the IPDB scans.
[quoted image]

Stern Electronics were pretty bad at manual accuracy, fwiw. There are lots of errors found in other areas of many different game manuals.

#26352 50 days ago
Quoted from play_pinball:

Stern Electronics were pretty bad at manual accuracy, fwiw. There are lots of errors found in other areas of many different game manuals.

Well, I went through every single Stern transformer panel schematics sheet for each game. The voltages were all the same.

If someone specifically knows that there is a difference, I'd be interested to see it.

#26355 50 days ago
Quoted from ForceFlow:

and the 49VAC voltage was erased on some MPU-200 game schematics, leaving only the 4 visible.

That '4' is actually referring to the transformer lug number. Otherwise yes, the '49VAC' is omitted.

#26356 50 days ago
Quoted from Quench:

That '4' is actually referring to the transformer lug number. Otherwise yes, the '49VAC' is omitted.

Oh, I missed that. There's three lugs for the 49VAC? That seems odd.

#26358 50 days ago

Not mine, click the link for a nice surprise...

Williams pinball machine - vintage
$300
Listed about an hour ago in Plainfield, IL
Details
Condition
Used - Fair
Color
gray
Vintage pinball machine. Currently not in working condition. All offers will be considered.

Cash only
Pick up only

https://www.facebook.com/marketplace/item/985317456475954/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3A34ff847c-3d48-4efc-bd99-617208d68651

#26359 50 days ago
Quoted from Garrett:

Not mine, click the link for a nice surprise...
Williams pinball machine - vintage
$300
Listed about an hour ago in Plainfield, IL
Details
Condition
Used - Fair
Color
gray
Vintage pinball machine. Currently not in working condition. All offers will be considered.
Cash only
Pick up only
https://www.facebook.com/marketplace/item/985317456475954/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3A34ff847c-3d48-4efc-bd99-617208d68651

marked as sold

#26361 50 days ago

#king-of-diamonds
Gottlieb em
$875
Milford, CT
https://m.facebook.com/groups/1041730652598065/permalink/7176388925798843/

Me: not a project but a good price.

#26363 49 days ago

Package deal $2500 or sold individually.

Shopped pins
Firepower $1500
Flash $1500

Project
Laser Ball $500

Falls Church, VA

Lots of manuals, boards, displays, etc$300
https://www.facebook.com/groups/ArcadePinball/permalink/7535819839850253/

#26364 49 days ago
IMG_3131 (resized).jpegIMG_3131 (resized).jpeg
#26366 48 days ago

#Magic

Stern Electronics SS 1979

$1000

Mostly just needs a full shop. Boots up and plays, switches and coils work.
Sound plays on startup but not in game. I've ordered a replacement ribbon cable to see if that resolves it.

Mpu and driver board have been professionally gone through. Rectifier board replaced within the past year.

Has a few sketchy wiring repairs that I've mostly resolved. Connectors could use repinned. A transistor on lamp driver board needs replaced.

Cabinet is in really good shape.
The playfield.... Not so much. Has some worn areas where the art is completely missing.
Back glass is usable but not fantastic.

Photos here
https://photos.app.goo.gl/Q1C3gE5UY5Ceezuj7

Located near Iowa City, Iowa, 52241

Message me for more info.

#26367 48 days ago
Quoted from HOLT45:

#Magic
Stern Electronics SS 1979
$1000
Mostly just needs a full shop. Boots up and plays, switches and coils work.
Sound plays on startup but not in game. I've ordered a replacement ribbon cable to see if that resolves it.
Mpu and driver board have been professionally gone through. Rectifier board replaced within the past year.
Has a few sketchy wiring repairs that I've mostly resolved. Connectors could use repinned. A transistor on lamp driver board needs replaced.
Cabinet is in really good shape.
The playfield.... Not so much. Has some worn areas where the art is completely missing.
Back glass is usable but not fantastic.
Photos here
https://photos.app.goo.gl/Q1C3gE5UY5Ceezuj7
Located near Iowa City, Iowa, 52241
Message me for more info.

If anyone is interested, I have a very decent Magic playfield and plastic set that would make a good candidate to swap into this Magic.

#26368 48 days ago

Eleven pins for sale

#stop-n-go $450
Travel Time $800
Top Score $850
Jive Time $600
Miss-O $500
Bowlette (bowler) $2500
Dealer's Choice $800
The Six Million Dollar Man $1,500
Lucky Seven $500
Space Time $700
8 Ball $700
Jubilee $700
Los Angeles, CA
https://m.facebook.com/groups/Pinball.for.Sale.Classifieds/permalink/2762617657236112/

o-din A Stop N Go and a Williams 8 Ball

#26369 48 days ago
Quoted from bluespin:

Eleven pins for sale
#stop-n-go $450
Travel Time $800
Top Score $850
Jive Time $600
Miss-O $500
Bowlette (bowler) $2500
Dealer's Choice $800
The Six Million Dollar Man $1,500
Lucky Seven $500
Space Time $700
8 Ball $700
Jubilee $700
Los Angeles, CA
https://m.facebook.com/groups/Pinball.for.Sale.Classifieds/permalink/2762617657236112/
o-din A Stop N Go and a Williams 8 Ball

Stop N Go!!!
Really cool EM, whoever gets it won’t be disappointed when they’ve got it working

Looking for a Sing Along project for a local newbie to pinball. He comes and plays Jacks Open and Buccaneer at my arcade all the time, and would really like Sing Along.
Message me if anyone sees one for sale within a few hours of Albany, NY

#26373 48 days ago
Quoted from bluespin:

stop-n-go $450
Los Angeles, CA

Quoted from Isochronic_Frost:

Stop N Go!!!
Really cool EM, whoever gets it won’t be disappointed when they’ve got it working

I would be on my way RIGHT NOW to get that Stop N Go if it was on this side of the Mississippi.

#26374 47 days ago
Quoted from bluespin:

Eleven pins for sale
Los Angeles, CA
https://m.facebook.com/groups/Pinball.for.Sale.Classifieds/permalink/2762617657236112/
o-din A Stop N Go and a Williams 8 Ball

There is this listing already posted in this thread (referenced in the quote above)
https://m.facebook.com/groups/Pinball.for.Sale.Classifieds/permalink/2762617657236112/

And there is also the below listing of 12 pinball machines for sale which lists basically the same batch of pinballs at slightly higher prices, with the location in Pasadena, CA and the owner has a different name (Erik in Pasadena v. Blake in LA). This Pasadena one was listed 4 days ago. The one in LA has been listed for less than one day.
https://www.facebook.com/marketplace/item/306236799220535

Can the both be legit or is one a scam, and, if so, which one? I guess it is possible that both are scams.

#26375 47 days ago
Quoted from iluvak9:

There is this listing already posted in this thread (referenced in the quote above)
https://m.facebook.com/groups/Pinball.for.Sale.Classifieds/permalink/2762617657236112/
And there is also the below listing of 12 pinball machines for sale which lists basically the same batch of pinballs at slightly higher prices, with the location in Pasadena, CA and the owner has a different name (Erik in Pasadena v. Blake in LA). This Pasadena one was listed 4 days ago. The one in LA has been listed for less than one day.
https://www.facebook.com/marketplace/item/306236799220535
Can the both be legit or is one a scam, and, if so, which one? I guess it is possible that both are scams.

Hmmm. The top one seems to have been taken down.

#26376 47 days ago
Quoted from iluvak9:

There is this listing already posted in this thread (referenced in the quote above)
https://m.facebook.com/groups/Pinball.for.Sale.Classifieds/permalink/2762617657236112/
And there is also the below listing of 12 pinball machines for sale which lists basically the same batch of pinballs at slightly higher prices, with the location in Pasadena, CA and the owner has a different name (Erik in Pasadena v. Blake in LA). This Pasadena one was listed 4 days ago. The one in LA has been listed for less than one day.
https://www.facebook.com/marketplace/item/306236799220535
Can the both be legit or is one a scam, and, if so, which one? I guess it is possible that both are scams.

You can pm the second one, tell him which one you want and ask if you can set a time to buy it. If he asks for a deposit it’s a scam.

#26378 46 days ago

Has anyone ever made a repro playfield for this game? Seems like 95% of them are in desperate need of one!

#26379 46 days ago
Quoted from seshpilot:

Has anyone ever made a repro playfield for this game? Seems like 95% of them are in desperate need of one!

CPR makes them and they're in stock.
https://classicplayfields.com/shop/pinball-playfields/captfan/

Hardtops are also available.
https://www.outsideedgeproducts.com/store/p75/Pinball_Playfield_Hardtop%E2%84%A2_2.0.html

#26380 46 days ago

Wonder if i drove the 8hr round trip if they would give me a deal

#26382 45 days ago
Quoted from ManbearpigOG:

Wonder if i drove the 8hr round trip if they would give me a deal

Meanwhile, someone else is loading it up while you consternate.

#26383 45 days ago
Quoted from Ballypin:

Meanwhile, someone else is loading it up while you consternate.

Oh, I wouldn’t drive without a guarantee. 8hrs is just so long for a pin that’s only so so on the fun scale. The wife likes the theme. I missed out on the one in Florida for $800 earlier this week.

#26384 45 days ago

#paragon
Bally SS
$1,800
Trumbull, CT
https://www.facebook.com/marketplace/item/466419579276301/

Me: comes with an uninstalled hardtop.

#26385 44 days ago

Fantastic deal, wish I wasn't so far away...

#hook
Odessa,Tx
$50
https://www.facebook.com/marketplace/item/440361518933362/?ref=search

Even assuming $500 was meant it's a great deal.

#26386 44 days ago
Quoted from coming2u:

Fantastic deal, wish I wasn't so far away...
#hook
Odessa,Tx
$50
https://www.facebook.com/marketplace/item/440361518933362/?ref=search
Even assuming $500 was meant it's a great deal.

That playfield looks preserved by dust. I bet it cleans up great. Amazing deal, can't believe it's still there

#26387 44 days ago

Looks like the hook is pending at $150 (price went up so I assume it was $50 to start with).

#26388 44 days ago

#king-pin-gottlieb
Gottlieb em
$600 obo
Dunnellin, FL
https://www.facebook.com/marketplace/item/971411621290980/

#26389 44 days ago
Quoted from bluespin:

#king-pin-gottlieb
Gottlieb em
$600 obo
Dunnellin, FL
https://www.facebook.com/marketplace/item/971411621290980/

Repainted cabinet and legs, faded backglass, wrong lockdown bar by two generations....
$600 is reasonable I guess, but owner paid $2000 for it? Someone had a good payday.

#26390 43 days ago
Quoted from jrpinball:

Repainted cabinet and legs, faded backglass, wrong lockdown bar by two generations....
$600 is reasonable I guess, but owner paid $2000 for it? Someone had a good payday.

Looks like it's gone.

#26393 41 days ago

I saw this yesterday. Looks like a "real" project. Gonna be spending a few extra bucks on this one.

Located in Middleburg Heights, OH 44130
Williams Time Fantasy Project
Was once a Firepower 2 turned into a fantasy
I unfortunatley lost the desire to finish this as I have many other projects to get to.
This game Has almost everything you need to finish it
-- Still needs plastic set, boards needs to be looked at, new roms, and playfield needs wired up. Please look at pictures carefully. I had goten decals on ebay but there is a scuff blemish on the side.
Can potentially save HUNDREDS if you know how to wire it up. GI is already wired. I have already turned the interconnect harness into Z connections so its easier to wire than ice cubes connectors. Come on over to look, play the collection and take this project home.

#26396 40 days ago

BLY Wizard!
$500
Elkton, MD
https://www.facebook.com/share/tSRVWqXM9k52zv9t/?mibextid=79PoIi
Also “working” and not a project

#26398 40 days ago

Williams El Toro
$500
Philly, PA
https://www.facebook.com/share/4b13FScLzp1wLjGS/?mibextid=79PoIi
You don’t see this one every day, chrome flippers still in it, cab looks rough, backglass looks perfect.

#26400 40 days ago

He also has Teed Off and Laserball projects for sale.

Promoted items from Pinside Marketplace and Pinside Shops!
From: $ 5.00
Playfield - Other
Rocket City Pinball
 
From: $ 130.00
Boards
Troxel Repair
 
$ 12.00
Electronics
Yorktown Arcade Supply
 
From: $ 33.00
Gameroom - Decorations
Rocket City Pinball
 
1,699 (OBO)
Machine - For Sale
Evansville, IN
Trade
Machine - For Trade
Marysville, IN
From: $ 170.00
$ 169.00
From: $ 14.00
Electronics
Third Coast Pinball
 
$ 199.95
$ 3.00
1,450 (OBO)
Machine - For Sale
Duanesburg, NY
$ 29.00
Boards
RoyGBev Pinball
 
$ 44.00
Boards
PinballReplacementParts
 
$ 18.95
Eproms
Pinballrom
 
2,200 (OBO)
Machine - For Sale
Dow, IL
From: $ 649.95
Lighting - Led
Pin Stadium Pinball Mods
 
$ 69.00
Gameroom - Decorations
Pinball Pimp
 
$ 1,159.00
Flipper Parts
Mircoplayfields
 
$ 29.00
Cabinet - Sound/Speakers
RoyGBev Pinball
 
Great pinball charity
Pinball Edu
There are 26,602 posts in this topic. You are on page 528 of 533.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.