Johns Creek, GA
F-14 project
$800
Chicago IL
https://m.facebook.com/groups/630406413802349/permalink/1805077986335180/
(Topic ID: 138626)
Linked Games
Black Hole
Gottlieb, 1981-
Dogies
Bally, 1968
-
Four Seasons
Gottlieb, 1968
-
Meteor
Stern Electronics, 1979
-
Show Boat
Gottlieb, 1961
-
Strikes and Spares
Bally, 1978
Topic Gallery
F-14 project #2
$800
Enid OK
https://m.facebook.com/groups/958426214184968/permalink/4095653547128870/
Bride of Pinbot
$2200
Pittsburgh, pa
https://m.facebook.com/groups/630406413802349/permalink/1804951959681116/
Seller also has a 2.0 bop kit for an extra $500
Quoted from bluespin:Bride of Pinbot
$2200
Pittsburgh, pa
https://m.facebook.com/groups/630406413802349/permalink/1804951959681116/
Seller also has a 2.0 bop kit for an extra $500
Sou ds like the cosmetic part of a 2.0 kit, not the full kit.
Meteor
Stern ss
$850
San Francisco Ca
Pinsider topkat
https://pinside.com/pinball/forum/topic/for-sale-meteor-34
Quoted from bluespin:Trident (ss)
Ice Revue (em)
Flash (ss)
$1500 obo for all three
Pinsider jwwhite15
Bakersfield Ca
https://pinside.com/pinball/forum/topic/official-california-for-sale-club-and-wanted-too/page/193#post-6021584
Flash is sold. Remaining two pins are $1000 for both.
louisville.craigslist.org link
Cheap. Looks like the player 1 display might be bad, same for player 2.
Generally a lurker on here, but wanted to ask a quick repair question. Is there a recommended ratchet screwdriver with bits set I should get to work on my Bally Williams machines (or should I just get the bits for my drill)? I was putting LEDs in and I need to detach a few of the light housings to get to them under the playfield. Do people have proffered tools?
Quoted from tbaum:Generally a lurker on here, but wanted to ask a quick repair question. Is there a recommended ratchet screwdriver with bits set I should get to work on my Bally Williams machines (or should I just get the bits for my drill)? I was putting LEDs in and I need to detach a few of the light housings to get to them under the playfield. Do people have proffered tools?
Really the wrong thread to ask that question, but a drill doesn't belong anywhere near a pinball machine, IMHO.
Quoted from tbaum:Generally a lurker on here, but wanted to ask a quick repair question. Is there a recommended ratchet screwdriver with bits set I should get to work on my Bally Williams machines (or should I just get the bits for my drill)? I was putting LEDs in and I need to detach a few of the light housings to get to them under the playfield. Do people have proffered tools?
Screwdrivers and nutdrivers should handle nearly any of those situations.
Quoted from DudeRegular:Screwdrivers and nutdrivers should handle nearly any of those situations.
Thanks, I'm guessing I can/should look for ones that are magnetized so I don't drop anything? Would that cause any risks with a machine?
Again apologies for posting here, I just figured since this is a project pins thread, many of you would have a lot of experience working on pins.
Quoted from tbaum:Again apologies for posting here, I just figured since this is a project pins thread, many of you would have a lot of experience working on pins.
Some people just love to play rent a mod. Good luck with your restore/repair.
Quoted from tbaum:Thanks, I'm guessing I can/should look for ones that are magnetized so I don't drop anything? Would that cause any risks with a machine?
Again apologies for posting here, I just figured since this is a project pins thread, many of you would have a lot of experience working on pins.
This is a thread for buying/selling project games.
I would recommend starting a new thread with your questions--you will likely be able to have a more thorough discussion there.
Quoted from ForceFlow:This is a thread for buying/selling project games.
I would recommend starting a new thread with your questions--you will likely be able to have a more thorough discussion there.
Will do thanks!
Quoted from Ceckitti:Some people just love to play rent a mod. Good luck with your restore/repair.
No, as ForceFlow (a moderator no less) indicated, he/she will get better answers in an appropriate thread.
Quoted from tbaum:As an aside, I did find a perfect answer on another thread after diving through the forums a bit more. Thanks all and apologies for the off topic post.
I'll let you go with a warning this time. 
Quoted from tbaum:As an aside, I did find a perfect answer on another thread after diving through the forums a bit more. Thanks all and apologies for the off topic post.
As punishment you must buy and restore the next project posted.
Quoted from jaytrem:As punishment you must buy and restore the next project posted.
Me: Searches for bingo “pinball machine”.
atlanta.craigslist.org link
Buy this so that we can get this long term CL ad off of my local email notification list. Just kidding?
Quoted from rkahr:Alien pinball - $575: baltimore.craigslist.org link
It's not what you think, but I couldn't resist sharing!
-Rob
-visit https://www.kahr.us to get my daughterboard that helps fix WPC pinball resets or my Pinball 2000 H+V Video Sync Combiner kit
I thought that I was the only one that posted dad jokes in this forum. Welcome to the club.
Quoted from bluespin:Me: Searches for bingo “pinball machine”.
atlanta.craigslist.org link
Buy this so that we can get this long term CL ad off of my local email notification list. Just kidding?
Even I know better than to buy one of those machines 
Quoted from robertmee:No, as ForceFlow (a moderator no less) indicated, he/she will get better answers in an appropriate thread.
Wasnt referring to forceflows comment. It was the other before him.
Because this thread has drifted of course MANY a times in the past with no one barking up.
Space Shuttle
$299.00
1984 Williams “Space Shuttle” pinball machine. Lights work but play does not reset. Needs work. Telford Pa. Pick up only Telford Pa.
https://www.facebook.com/marketplace/item/250540996403952
I'd take the chance if it were closer to me, but don't want to risk needing a System 9 MPU. It could be power supply or something minor.......Actually, probably worth it even if the MPU needs to be replaced.
Quoted from DropTarget:Space Shuttle
$299.00
1984 Williams “Space Shuttle” pinball machine. Lights work but play does not reset. Needs work. Telford Pa. Pick up only Telford Pa.
https://www.facebook.com/marketplace/item/250540996403952
I'd take the chance if it were closer to me, but don't want to risk needing a System 9 MPU. It could be power supply or something minor.......Actually, probably worth it even if the MPU needs to be replaced.
There’s a new guy making Williams boards. I don’t know if he’s making system 9 mpus yet.
Space Time
Bally em
$400
Boston, ma
Pinsider BigBangBack
https://pinside.com/pinball/forum/topic/northeast-us-for-sale-thread/page/375#post-6030597
Know very little about EMs, so I can't tell what machine it is..but for $49 as the seller says "It's in pieces and would and would be best used for decor"..who knows?
https://www.facebook.com/marketplace/item/712053123083020?ref=search&referral_code=undefined
Quoted from Bandit78:Know very little about EMs, so I can't tell what machine it is..but for $49 as the seller says "It's in pieces and would and would be best used for decor"..who knows?
https://www.facebook.com/marketplace/item/712053123083020?ref=search&referral_code=undefined
Bally Flip Flop. Fun game, $100.00's of dollars in parts.
Quoted from DropTarget:Space Shuttle
$299.00
1984 Williams “Space Shuttle” pinball machine. Lights work but play does not reset. Needs work. Telford Pa. Pick up only Telford Pa.
https://www.facebook.com/marketplace/item/250540996403952
I'd take the chance if it were closer to me, but don't want to risk needing a System 9 MPU. It could be power supply or something minor.......Actually, probably worth it even if the MPU needs to be replaced.
Judging by the photo, the machine appears to be booting. So that is a very good sign. At minimum it may need the batteries replaced (assuming they have not leaked) or the onboard ram needs to be replaced. It may be a good buy for someone.
Quoted from bluespin:There’s a new guy making Williams boards. I don’t know if he’s making system 9 mpus yet.
You can make one for yourself, in fact: https://github.com/AmokSolderer/APC
Quoted from DropTarget:Space Shuttle
$299.00
1984 Williams “Space Shuttle” pinball machine. Lights work but play does not reset. Needs work. Telford Pa. Pick up only Telford Pa.
https://www.facebook.com/marketplace/item/250540996403952
I'd take the chance if it were closer to me, but don't want to risk needing a System 9 MPU. It could be power supply or something minor.......Actually, probably worth it even if the MPU needs to be replaced.
I sent a message. So we'll see. Very close pickup for me. Just need to beat Colson to it. Haha.
Quoted from ThatOneDude:You can make one for yourself, in fact: https://github.com/AmokSolderer/APC
That's super cool. Had no idea about that. Now I want to build one.
Quoted from truemagoo102:That's super cool. Had no idea about that. Now I want to build one.
I will probably have a v2.4 for sale. I decided to move to a P-ROC on my project.
Quoted from Slogan1111:I sent a message. So we'll see. Very close pickup for me. Just need to beat Colson to it. Haha.
Good luck with that! lol
It does seem like a good deal, I'm just being lazy.
Addams Family Alert in Atlanta GA.
https://www.invaluable.com/auction-lot/addams-family-pinball-machine-by-bally-midway-11-c-fdf413caad
Quoted from DropTarget:Good luck with that! lol
It does seem like a good deal, I'm just being lazy.
Typical no response. Oh well.
Post on Mr Pinball this AM:
Meteor, 1979 Stern: 900
Project machine. Complete with good cosmetics.
Mike Phone: 651-227-9520
[email protected], St. Paul, Minnesota
Williams FLASH for $200, a bit north of Austin, TX
Not my ad. Sounds like a great deal. Hope someone here gets it!
This popped up again on FB Marketplace. This same ad was up a few months ago. Buyer beware.
Grand Prix & Hee Haw
https://www.facebook.com/marketplace/item/827978741094222/?ref=search&referral_code=undefined
Bally 1968 Mini Zag for $ 100 in Christmas, FL
GET THIS NOW !!
https://www.facebook.com/marketplace/item/248497476620720/?ref=search&referral_code=undefined
Really wish I could get that Mini Zag, birth year pin for my wife. Looks like Wiggler in reverse minus the multi ball
Too Late. Seller jumped price to 250. Kinda of a crap shoot...BG has some flaking and the metal trim around the BG is rusted. Since this is near the Atlantic, have to assume the rest of the game could be a rust bucket. Maybe some termites too. 
Quoted from Ballypin:Bally 1968 Mini Zag for $ 100 in Christmas, FL
GET THIS NOW !!
https://www.facebook.com/marketplace/item/248497476620720/?ref=search&referral_code=undefined
#twinky
For auction here.....
https://auctions.ejsauction.com/auction-lot/twinky-pinball-machine-by-chicago-dynamic_D9D4474BA2/
Current bid:$110
I almost didn't look at the auction thinking that this was a Hostess twinkie..... lol
Never seen one of these before.....
Quoted from nascarrey:Twinky
For auction here.....
https://auctions.ejsauction.com/auction-lot/twinky-pinball-machine-by-chicago-dynamic_D9D4474BA2/
Current bid:$110
I almost didn't look at the auction thinking that this was a Hostess twinkie..... lol
Never seen one of these before.....
Shame it's in Arizona
Promoted items from Pinside Marketplace and Pinside Shops!
Ottawa, ON
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
