(Topic ID: 138626)

Post Project Pins for sale here - CL, eBay, Pinside and others

By Pecos

8 years ago


Topic Heartbeat

Topic Stats

  • 26,090 posts
  • 780 Pinsiders participating
  • Latest reply 8 hours ago by Daditude
  • Topic is favorited by 710 Pinsiders

You

Linked Games

Topic Gallery

View topic image gallery

Texas (resized).png
IMG_3312 (resized).png
IMG_0266 (resized).jpeg
IMG_0264 (resized).jpeg
IMG_0263 (resized).jpeg
IMG_0262 (resized).jpeg
IMG_0158 (resized).jpeg
IMG_0157 (resized).jpeg
IMG_0106 (resized).jpeg
IMG_0166 (resized).jpeg
IMG_0085 (resized).jpeg
IMG_0108 (resized).jpeg
IMG_0145 (resized).jpeg
pasted_image (resized).png
427544480_438001162096613_4726558780365908600_n (resized).jpg
432351887_946619277018071_8910572839030189925_n (resized).jpg

Topic index (key posts)

2 key posts have been marked in this topic (Show topic index)

There are 26,090 posts in this topic. You are on page 355 of 522.
#17701 3 years ago
Quoted from bluespin:

Buy a roll of shrink film at Home Depot, Lowe’s, Harbor Freight, etc. Shrink the game before taking it outside.

Perfect - I already have a bunch

#17702 3 years ago
Quoted from bluespin:

Buy a roll of shrink film at Home Depot, Lowe’s, Harbor Freight, etc. Shrink the game before taking it outside.

pasted_image (resized).pngpasted_image (resized).png
#17703 3 years ago

Tbaum -

Since its only 30', I would drape it in a large drop plastic drop cloth, wrap well, and go when the rain lets up. The rain has been spotty heavy over here, and I suspect it will be the same where you're at.

I assume your able to get it into the van quickly, and have the luxury of waiting out the rain before removing it from the van.

Personally, I like pool noodles cut in half for all edges, and the idea of shrink wrapping, but sometimes shrink wrapping is a real pain.

I did have some experience with rain - I sold a Firepower to someone in Elgin, and was taking it up there in the bed of a truck. I had it wrapped in a plastic drop cloth, held in place with duct tape and bungee cords, and sitting on 2 X 4s. The same storm that partially flattened East Peoria struck while I was on the interstate near Bloomington. I pulled of the interstate, waited it out, and continued. When I got there, I was expecting a disaster, but instead, there was barely any water on it, and I was able to remove all evidence of water using a washcloth - it was damp, but not dripping wet. So, a well wrapped machine will be just fine.

#17704 3 years ago
Quoted from Billc479:

Tbaum -
Since its only 30', I would drape it in a large drop plastic drop cloth, wrap well, and go when the rain lets up. The rain has been spotty heavy over here, and I suspect it will be the same where you're at.
I assume your able to get it into the van quickly, and have the luxury of waiting out the rain before removing it from the van.
Personally, I like pool noodles cut in half for all edges, and the idea of shrink wrapping, but sometimes shrink wrapping is a real pain.
I did have some experience with rain - I sold a Firepower to someone in Elgin, and was taking it up there in the bed of a truck. I had it wrapped in a plastic drop cloth, held in place with duct tape and bungee cords, and sitting on 2 X 4s. The same storm that partially flattened East Peoria struck while I was on the interstate near Bloomington. I pulled of the interstate, waited it out, and continued. When I got there, I was expecting a disaster, but instead, there was barely any water on it, and I was able to remove all evidence of water using a washcloth - it was damp, but not dripping wet. So, a well wrapped machine will be just fine.

Perfect - really appreciate the advice!

#17705 3 years ago
Quoted from tbaum:

Should I bring one of those plastic covers for mattresses or anything to cover the machine? Any other suggestions?

You are going the right direction. Get a roll of sheet plastic at the big box store. Any sheet plastic ( like mattress plastic) that is big enough to completely cover the pin to keep it dry. Get some of the cheap duct tape. Pull the plastic tight and lock it in place with the duct tape.

#17706 3 years ago

#evel-knievel
Location:Altamonte Springs, FL
Price: $600
OP:Original Bally's 1978 Evil Knievel Pinball Machine. Electical works, needs some TLC to get mechanic working. Turns on, but won't click over. Must be able to pick up.
Link: https://www.facebook.com/marketplace/item/721122778457138/

#17707 3 years ago

Prepare for a bidding war
Seawitch
Location: Wasilla, AK
Price: $150
OP: $150 obo Pinball machine There is also an arcade machine. Make offer.Unsure if they work.
Link: https://www.facebook.com/marketplace/item/1619166571592746/

#17708 3 years ago
Quoted from edward472:

Evel Knievel
Location:Altamonte Springs, FL
Price: $600
OP:Original Bally's 1978 Evil Knievel Pinball Machine. Electical works, needs some TLC to get mechanic working. Turns on, but won't click over. Must be able to pick up.
Link: https://www.facebook.com/marketplace/item/721122778457138/

Man, how does it look? I don't have FB but I do have a customer that has been asking me for an EK.

#17709 3 years ago
Quoted from Atari_Daze:

Man, how does it look? I don't have FB but I do have a customer that has been asking me for an EK.

116153980_10217418298713028_280994614961137091_o (resized).jpg116153980_10217418298713028_280994614961137091_o (resized).jpg116434791_10217418272512373_3833805315217993949_o (resized).jpg116434791_10217418272512373_3833805315217993949_o (resized).jpg116435253_10217418269192290_2784127965457401364_o (resized).jpg116435253_10217418269192290_2784127965457401364_o (resized).jpg116573203_10217418272072362_492611611751688121_o (resized).jpg116573203_10217418272072362_492611611751688121_o (resized).jpg116984282_10217418270552324_3688443287830455954_o (resized).jpg116984282_10217418270552324_3688443287830455954_o (resized).jpg
#17710 3 years ago
Quoted from Atari_Daze:

Man, how does it look? I don't have FB but I do have a customer that has been asking me for an EK.

It’s 38 minutes in and already pending sale.

#17711 3 years ago
Quoted from edward472:

Prepare for a bidding war
Seawitch
Location: Wasilla, AK
Price: $150
OP: $150 obo Pinball machine There is also an arcade machine. Make offer.Unsure if they work.
Link: https://www.facebook.com/marketplace/item/1619166571592746/

I’m willing to play!

#17712 3 years ago
Quoted from bluespin:

It’s 38 minutes in and already pending sale.

Yep, don't think pins priced right last very long.

#17713 3 years ago
Quoted from bluespin:

I’m willing to play!

I don't think many of us make it to alaska much

#17714 3 years ago
Quoted from woody76:

I don't think many of us make it to alaska much

I do, or at least did before Covid.

#17715 3 years ago

There is a pinsider that lives in Wasilla. Can't remember his name, but he is into the classic Sterns as I recall.

#17716 3 years ago
Quoted from cottonm4:

There is a pinsider that lives in Wasilla. Can't remember his name, but he is into the classic Sterns as I recall.

Are you thinking of
Tomass ?

#17717 3 years ago
Quoted from cottonm4:

There is a pinsider that lives in Wasilla. Can't remember his name, but he is into the classic Sterns as I recall.

NAVL doesn't offer service in Alaska. The seller said that ten locals were interested. Maybe I should have asked Sarah Palin to pick it up for me.

#17718 3 years ago
Quoted from Daditude:

Are you thinking of
Tomass ?

That sounds correct.

#17719 3 years ago
Quoted from bluespin:

NAVL doesn't offer service in Alaska. The seller said that ten locals were interested. Maybe I should have asked Sarah Palin to pick it up for me.

I think she is Arizona now

#17720 3 years ago

I just sent Tomass an email about Seawitch

#17721 3 years ago
Quoted from edward472:

[quoted image][quoted image][quoted image][quoted image][quoted image]

What a rip off, first picture it has a lovely topper, then it disappears for all the rest. Cheapskates!

#17722 3 years ago

Sky Divers for $600

Looks to be in really nice shape, but does not go into a game.

Located in York, PA

https://www.facebook.com/marketplace/item/1008703139562779

116869526_10220952109885412_8800423590484193340_o.jpg116869526_10220952109885412_8800423590484193340_o.jpg
#17723 3 years ago

Tomass picked up that Seawitch...just sent me a text w/ a pic.

So that one is gone.

12
#17724 3 years ago
Quoted from ss-pinball:

Tomass picked up that Seawitch...just sent me a text w/ a pic.
So that one is gone.

Haha! Thank you man! Never would have seen that if not for you.

#17725 3 years ago
Quoted from Tomass:

Haha! Thank you man! Never would have seen that if not for you.

You made a great buy.

#17726 3 years ago
Quoted from Tomass:

Haha! Thank you man! Never would have seen that if not for you.

Glad you picked it up...I hope to see the "running smoothly video" soon!

#17727 3 years ago
Quoted from cottonm4:

You made a great buy.

Thanks! I wasn't trying to take advantage of someone. I offered 800. BG is flaking and coin mechs and the hardware that holds them is missing so I will put a good bit of work into this one.

20200731_153933 (resized).jpg20200731_153933 (resized).jpg
#17728 3 years ago
Quoted from Tomass:

Thanks! I wasn't trying to take advantage of someone. I offered 800. BG is flaking and coin mechs and the hardware that holds them is missing so I will put a good bit of work into this one.
[quoted image]

But on a positive note, that playfield looks to be in great shape. Nice pick up!

#17729 3 years ago
Quoted from ss-pinball:

Glad you picked it up...I hope to see the "running smoothly video" soon!

I will do that! I think I will play it some, but then do a full resto on this one!

#17730 3 years ago
Quoted from cmack750:

But on a positive note, that playfield looks to be in great shape. Nice pick up!

Thank you!

#17731 3 years ago

Another win for the project pin thread! Congrats on the witch!!! Awesome game, never getting rid of mine!

#17732 3 years ago
Quoted from Tomass:

Thanks! I wasn't trying to take advantage of someone. I offered 800. BG is flaking and coin mechs and the hardware that holds them is missing so I will put a good bit of work into this one.
[quoted image]

At $800.00, you still made a great buy. Bask in the glory.

When you are done you will probably be all complete for less than $1500.00, unless Alaska shipping sticks it to you.

#17733 3 years ago

#target-pool

boston.craigslist.org link

This is close to me. If someone needs me to grab it for them let me know

#17734 3 years ago
Quoted from Murphdom:

This is close to me. If someone needs me to grab it for them let me know

Tempting

#17735 3 years ago

Yes, glass and playfield look nice. Cabinet looks to be repainted (if that matters).

#17736 3 years ago

Flicker for $200!

Located in Marlton, NJ

Appears to be in pretty good shape.

https://www.facebook.com/marketplace/item/1826851647446506

flicker.jpgflicker.jpg
#17737 3 years ago
Quoted from HydrogenHuman:

Flicker for $200!
Located in Marlton, NJ
Appears to be in pretty good shape.
https://www.facebook.com/marketplace/item/1826851647446506[quoted image]

Paging Colson. Will a Mr Colson please pickup the white courtesy phone?

Go get this for me, buddy !

#17739 3 years ago

Flying Carpet
Gottlieb em
$400
Indianapolis, IN
https://www.facebook.com/jerry.gooderum/videos/1018788745207786/

#17740 3 years ago

Vulcan
Gottlieb em
$450
San Tan Valley, az
https://www.facebook.com/marketplace/item/3186144821433291/

#17743 3 years ago

Foxy Lady
Game plan cocktail pin
$500
Evansville IN
https://www.facebook.com/marketplace/item/2634719413513417/

#17746 3 years ago
Quoted from bluespin:

Foxy Lady
Game plan cocktail pin
$500
Evansville IN

Wrong link fyi * fixed, disregard.

#17747 3 years ago

Thanks

#17748 3 years ago

Wrong address link.

#17749 3 years ago

Raven
Gottlieb ss
$150
Jacksonville FL
jacksonville.craigslist.org link

Me: I need a system 80b cabinet for my tx sector restore, but sadly this one has separation in the front. Is that an easy fix?

Promoted items from Pinside Marketplace and Pinside Shops!
$ 29.00
Boards
RoyGBev Pinball
 
$ 29.00
Cabinet - Sound/Speakers
RoyGBev Pinball
 
From: $ 1.00
Playfield - Other
Rocket City Pinball
 
$ 69.00
Gameroom - Decorations
Pinball Pimp
 
$ 1,159.00
Flipper Parts
Mircoplayfields
 
1,500
Machine - For Sale
Warren, OH
From: $ 130.00
Boards
Troxel Repair
 
$ 12.00
Electronics
Third Coast Pinball
 
$ 44.00
Boards
PinballReplacementParts
 
2,500
Machine - For Sale
Ottawa, ON
$ 12.00
Electronics
Yorktown Arcade Supply
 
$ 100.00
Gameroom - Decorations
The Flipper Room
 
From: $ 3.00
Cabinet - Other
Space Coast Pinball
 
$ 10.00
Playfield - Plastics
UpKick Pinball
 
$ 18.95
Eproms
Pinballrom
 
From: $ 15.00
Cabinet - Other
NO GOUGE PINBALL™
 
Wanted
Machine - Wanted
Middletown, OH
From: $ 33.00
Gameroom - Decorations
Rocket City Pinball
 
$ 169.00
There are 26,090 posts in this topic. You are on page 355 of 522.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/post-project-pins-for-sale-here-cl-ebay-pinside-and-others/page/355?hl=jdissen87 and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.