Quoted from Daditude:I saw the one too. I would 100% get it if I were closer. If any pinsiders live within driving distance, I would recommend picking it up before it's gone.
I'm to pick it up this week. Meteor is a fun game
Quoted from Daditude:I saw the one too. I would 100% get it if I were closer. If any pinsiders live within driving distance, I would recommend picking it up before it's gone.
I'm to pick it up this week. Meteor is a fun game
Quoted from djblouw:I'm to pick it up this week. Meteor is a fun game
It should have the transformer you need to make your Quicksilver build a screamer of a pin.
Quoted from cottonm4:It should have the transformer you need to make your Quicksilver build a screamer of a pin.
Nah, the transformer in my QS is just fine. I've had a few people play it, and they all state it plays good, and more power would be trouble.
Quoted from cpu-slave:$200 #Dolly in Iowa
https://www.facebook.com/marketplace/item/3324481610936330
Checking to see if this is available. Only problem is I have no idea who can ship from Iowa to Mass.
Quoted from HydrogenHuman:Checking to see if this is available. Only problem is I have no idea who can ship from Iowa to Mass.
Michelle Bianchi
800-959-8880
cell: 630-344-3093 [email protected]
Bob Cunningham
772-501-2883
Dan Scott
864-903-1324
Quoted from Daditude:Michelle Bianchi
800-959-8880
cell: 630-344-3093 [email protected]
Bob Cunningham
772-501-2883
Dan Scott
864-903-1324
Dan Scott I haven't heard of, thanks!
Quoted from HydrogenHuman:Wow, Anchorage Alaska. Now That would be a drive if you were on the east coast!
...and the ad says it works!!!!
Wow! I wish I could get it.
#tri-zone $500
Located in Maryland.
https://www.facebook.com/marketplace/item/3163612410370583
trizone.jpgQuoted from HydrogenHuman:Only problem is I have no idea who can ship from Iowa to Mass.
Fastenal is shipping to select stores again.
Quoted from Mk1Mod0:Fastenal is shipping to select stores again.
Finally, yes!
Isn't there a specific contact or contacts at Fastenal that are pinball fans and are really good? I seem to recall reading about that one time.
Quoted from HydrogenHuman:Tri Zone $500
Located in Maryland.
https://www.facebook.com/marketplace/item/3163612410370583
[quoted image]
You should get this. Tri Zone is a great game.
Quoted from dothedoo:You should get this. Tri Zone is a great game.
I'm sure it's gone already. Also with shipping it would probably bring the cost up to at least $800.
Quoted from HydrogenHuman:I'm sure it's gone already. Also with shipping it would probably bring the cost up to at least $800.
Time to break your road trip for a pin cherry.
Quoted from bluespin:Time to break your road trip for a pin cherry.
I travel down to Florida every year, and I am not a fan of driving long distances haha.
Quoted from bluespin:Time to break your road trip for a pin cherry.
First pin was 45 minutes away.
I drove to Cleveland last month 8 1/2 hours driving time and another time almost to Flint about 4 hours round trip...road trips are overrated.
A few weeks ago it was an hour there and an hour back.
Tomorrow's pinball trip is an hour there and an hour back for my grail game.
I'd rather play pinball than drive.
I think I'm game for up to four hours one way but it would need to be a helluva deal for a pin that I'd been looking for for a while.
Quoted from Ballypin:Bally Old Chicago in Knoxville, TN for $ 300
Go get it NOW !!
https://www.facebook.com/marketplace/item/643044573236532
Thank you! I'm trying to buy this. Wish me luck.
Quoted from bluespin:Thank you! I'm trying to buy this. Wish me luck.
Note: Purchase of Big Ben also required. Additional $500.
Seriously, best of luck! Picking up an OC for $300 in 2020 would be really sweet.
Stellar Wars
Location: Grand Rapids, MI
Price: $375
OP: You're looking at a 1979 Williams Stellar Wars wide body pinball machine..Only a few wide body games were ever produced..This is a project game, as it will be needing some work to the CPU/Driver & display boards..Beyond my capability & really don't have the time to fix it..Machine fires up, most all of the lights & strobes work & I can put it into Test mode to show the bumpers & 1 flipper works..The other needs a new coil..Cabinet is in fair condition, as is the playing field..Back glass is real nice & I do have the main playing field top glass, stainless cover & keys for it...Comes with all the Owners & Trouble Shooting manuals, including all the wiring schematics for the game..Fix it or turn it into a cool lit up wall hanger...**As long as the ad is up, it's available**..Cash sale.You pick up...Standale area...Thanks for looking.
Link: https://www.facebook.com/marketplace/item/314638689703466/
#big-valley
Location: Kingston, NY
Price: $325
OP:Just got this in from an employee break room in an old warehouse so it has not been used in years. It had not been plugged in so assume it is not working. Bob Cunningham is coming in the next couple days so it can be picked up and delivered.
Link: https://www.facebook.com/marketplace/item/757956638347552/
#dinosaur-eggs
Location:Westerville, OH
Price: $6oo
Link: https://www.facebook.com/marketplace/item/300028421201470/
Quoted from Murphdom:Grand Prix
boston.craigslist.org link
OP: Grand Prix pinball game in decent shape
So I asked about this and they told me that they already had someone picking it up but if I wanted to pay more it for it it was mine. If your the seller and you’re on pinside and you probably are judging by the pictures please be an honest seller.
Quoted from Murphdom:So I asked about this and they told me that they already had someone picking it up but if I wanted to pay more it for it it was mine. I hate people. If your the seller and your on pinside and you probably are judging by the pictures. You’re an idiot. Be an honest seller.
Ah yes, the infamous online CL auction.
I'd post more but just deleted it, not the place for a rant about people with poor ethics.
f77cf6f060252ce4 (resized).jpegQuoted from Murphdom:So I asked about this and they told me that they already had someone picking it up but if I wanted to pay more it for it it was mine. If your the seller and you’re on pinside and you probably are judging by the pictures please be an honest seller.
Thanks for the heads up, I was considering this machine. If it’s that kind of sales situation, then I’ll pass.
Dave
#granny-and-the-gators
For auction here...
https://www.estatesales.net/NY/East-Springfield/13333/2585361
They also have a Gyruss arcade game for auction too....
Quoted from nascarrey:Couple of cocktail pins for sale here. 1 looks to be a custom pin....can anyone id the other one?
https://www.estatesales.net/TX/Sugar-Land/77479/2583192
Thats a Roy Clark that someone painted over
Quoted from edward472:Thats a Roy Clark that someone painted over
OK, what about the other cocktail?
The STellar Wars in GR MI is pending and has been for a few hours now.
My standard message is:
"I know there are six people ahead of me...if they stiff you, keep me in mind."
normally the response is "Hahaha, I will."
Quoted from NicoVolta:Note: Purchase of Big Ben also required. Additional $500.
Seriously, best of luck! Picking up an OC for $300 in 2020 would be really sweet.
If I have to pick up a Big Ben I'll drop it off at your museum on the way to the York show (after you've already left) and write it off on my taxes!
Quoted from nascarrey:Mata Hari
Old Chicago
For sale here.....
https://www.estatesales.net/NC/Wagram/28396/2593410
Two Old Chicagos in one week? Only 5-1/2 hours one way.
Quoted from nascarrey:Granny and the Gators
For auction here...
https://www.estatesales.net/NY/East-Springfield/13333/2585361
They also have a Gyruss arcade game for auction too....
You’re kidding me.
A GATG ONLY A HALF HOUR FROM ME?!?
I’m going. I need this to be next to Baby Pac-Man. I even have a spare working vIDIOT deluxe just in case one ever came up.
Quoted from edward472:Big Valley
Location: Kingston, NY
Price: $325
OP:Just got this in from an employee break room in an old warehouse so it has not been used in years. It had not been plugged in so assume it is not working. Bob Cunningham is coming in the next couple days so it can be picked up and delivered.
Link: https://www.facebook.com/marketplace/item/757956638347552/
Trying to get this at the moment. Let’s see what they say.
If anyone needs a Fireball or Sinbad playfield
https://www.facebook.com/marketplace/item/291626382095284/
#star-trek-the-next-generation
No Good Gofers
For sale here.....
Quoted from edward472:If anyone needs a Fireball or Sinbad playfield
https://www.facebook.com/marketplace/item/291626382095284/
What is sad about those is both look pretty decent from what I could see in the pictures. I don't mind people "making art or furniture" out of old pinball machines if they start with "junk" but wasting something nice on a coffee table really seems like a shame!
Quoted from too-many-pins:What is sad about those is both look pretty decent from what I could see in the pictures. I don't mind people "making art or furniture" out of old pinball machines if they start with "junk" but wasting something nice on a coffee table really seems like a shame!
Prices are such nowadays very few pins will be out out to pasture. Any pin now that is a basket case is now a source of parts. That said, I do have a real nice Hot Hand play field that I don't think there is much market for. It could make good coffee table but I'll probably just hang it on the wall.
Quoted from nascarrey:Mata Hari
Old Chicago
For sale here.....
https://www.estatesales.net/NC/Wagram/28396/2593410
They want $1500 each. Someone local may be able to make an offer on the last day and pick them up as I doubt they’ll sell at those prices on day one.
Quoted from too-many-pins:What is sad about those is both look pretty decent from what I could see in the pictures. I don't mind people "making art or furniture" out of old pinball machines if they start with "junk" but wasting something nice on a coffee table really seems like a shame!
The Fireball is the home model. I’m guessing the board was dead there....
Gottlieb Volcano
$1200.00.
Has a sound problem.
Kansas City
I got to play a Volcano some time back. I thought it was fun.
------------------------------------------------
kansascity.craigslist.org link
" Up for sale is a 1981 Gottlieb System 80 Volcano.
This is a small project that I do not have time for and was taken in on trade.
Pinball fully works and is playable, needs some fine tuning.
Playfield is in good shape, fully LED, displays are good, flippers are good have plenty of power, cabinet has been touched up but looks good.
This was trade in I have not been through the game and it is not shopped. I only inspected when I set it up and this is what I found
The BAD - Game has sound in attract mode, No Sound in game mode. Out lane has main wire off that moves the outlane for the skill shot. I have not put it back on because I found a couple blown fuses in the bottom of the game and do not know if they are left overs from another issue. All fuses are good right now, Did not want to dig that deep.
Please contact me with any questions
We do take Credit cards. We also offer delivery for a fee.
Pinball, video Game, slot, dart, pool,
Decent looking Flash Gordon just south of Fargo. No idea on the price, but I did e-mail to ask. I probably won't be going for it.
Quoted from HHaase:Decent looking Flash Gordon just south of Fargo. No idea on the price, but I did e-mail to ask. I probably won't be going for it.
fargo.craigslist.org link
I've talked to LOTS of people about FG (one was in South Dakota or Wyoming or something last month--a bit too far) and finally joined the club with a project today.
I'm tired but excited.
4 Vintage Machines for sale.
$175 each or $600 for all. Looks like 3 of them are bingo style, and the other is Cyclone
Located in PA
https://www.facebook.com/marketplace/item/820697141793533
4.jpg
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/post-project-pins-for-sale-here-cl-ebay-pinside-and-others/page/349?hl=impzilla and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.