Manufacturer: Bally
Game/Type: Bow & Arrow / EM
Year: November 1974
Production: 7,630
Cost: $150
Location: Louisville, KY
Link/Contact: louisville.craigslist.org link

OP: I am moving so selling a couple of my pinball projects. This Bow and Arrow is mostly complete minus a couple coils and switches I believe. The cabinet is in good condition, the back glass is actually pretty nice, the playfield has some wear but would make a players game. It is missing the legs and the backbox door. This would be a good project or an excellent parts machine. I really don't want to sell but I just don't want to pay to store or pay movers to move it. This is a steal if you are needing any Bally parts.....

Manufacturer: Williams
Game/Type: Toledo / EM 2 Player
Month/Year: December 1975
Production: 3,001
Cost: $325
Location: Portland, ME
Link/Contact: maine.craigslist.org link

OP: Asking $325 Or Best Reasonable Offer ~*~*~

~ Nice Full-Sized Pinball Machine in Very Good Condition with Key ~
~ Only 3001 Units were Produced ~
~ EM - Electro-Mechanical ~ Kids Had LOTS of Fun with this One
~ Pick-Up ONLY in Portland, Maine - Near Exit 53 off Maine Turnpike ~
~ Machine was looked at and Electronics, Lights, Flippers, etc. are in fine working order - machine could use new rubber replacement and a light cleaning (received an est. of $50-$75 to replace rubber and clean)
~ CASH ONLY - Must Arrange Pick-Up in Portland- SERIOUS INQUIRIES ONLY - Respond with your direct email address and/or cellphone contact information and confirm your interest and your location please ~ If you have a REASONABLE offer and don't provide direct contact info, I may Not respond because I'm allowing few days for offers from various postings - have posted on a Facebook Page and Vintage/Antique Shop as well~ Once I contact parties with accepted offers (likely to be more than one person at a time), it will be first come with Cash, First to Get Machine ~ Thank You~

Not me! LOL. Mad World does look pretty cool, but it looks like the backglass has some flaking at the bottom.

Manufacturer: Williams
Game/Type: Lucky Strike / EM 1 Player
Month/Year: August 1965
Production: 1,800
Cost: $375
Location: Louisville, KY
Link/Contact: louisville.craigslist.org link

OP: Moving so selling a couple pinball machines and parts (see other posts). I'm pretty confident this pinball is in working condition because I played it when I bought it however it will need to be shopped and cleaned. A perfect project for a new pinball enthusiast. The backglass is nice and the playfield has some wear but will make a good players game.

could of had them both, but I am completely out of room.

Dang, that would be a nice score. I will say that that backglass looks way uglier than Galahad.

Cabinet and boards only

Manufacturer: Game Plan
Game/Type: Sharpshooter / SS 4 Player
Month/Year: May 1979
Production: 4,200
Cost: $50
Location: Louisville, KY
Link/Contact: louisville.craigslist.org link

OP: I restored a Sharpshooter and still have an extra cabinet. The bottom cabinet is in nice condition and the backbox is decent. I'll let the displays and what ever circuit boards in it go with it. No legs, no coin door, and no lockdown bar.

How could you tell from those hi-res pics? Reds never fade or flake. :roll:At 3 bills you could still put a BGresto in it and be OK.

Oh well. Waiting for the next jewel to pop up and send this squirrel crazy.

Look at my post 9749. A very low production Bally pin, with only 80 produced!

Liar!!! I was just there and you have plenty of room in that garage.

So it could be really bad if they posted decent pics or you see it in person. If you can tell it has flaking from those shitshow pictures...

So I should call and offer $50 more?

Look at my location. I’m crazy but i’m not driving to Washington State.

I’m just pointing that out to further your pin frustration

Manufacturer: Williams
Game/Type: Firepower II / SS
Year: August 1983
Production: 3,400
Cost: $500
Location: Milton, MA
Pinsider: lllvjr

OP: Unshopped
ME: Posted in the NE sale forum. No marketplace ad.

Manufacturer: Gottlieb
Game/Type: "300" / EM 4 Player
Month/Year: August 1975
Production: 7,925
Cost: $200 OBO
Location: Guntersville, AL
Link/Contact: huntsville.craigslist.org link

OP: I have a 300 pinball machine for sale. 200obo. Missing front glass. All counters work and lights seem to work.

GARAGE SALE

Manufacturer: Bally
Game/Type: Circus / EM
Year: March 1973
Production: 3,550
Cost: ????
Location: Lake Geneva, WI
Link/Contact: janesville.craigslist.org link

DATES: FRI 08/04 - SAT 08/05

Manufacturer: Gottlieb
Game/Type: Harbor Lites / EM Woodrail 1 Player
Month/Year: February 1956
Production: 1,500
Cost: ????
Location: Louisville, KY
Link/Contact: louisville.craigslist.org link

OP: Want to sell older pinball machines. 1950's and early 1960's. 2 Bally and 1 Gotleib. 2 work good, the other just quit lately. Come see and make offer. Also have 10 cigar boxes full of repair parts for these types of machines. Maybe you have an interesting trade? Calls after 12 noon only. show contact info
Will not text. Bally Bikini, Bally Nightclub and Gotleib Horbor Lites.

GARAGE SALE

Manufacturer: Bally
Game/Type: Embryon / SS
Year: June 1981
Production: 2,250
Manufacturer: Williams
Game/Type: Firepower / SS
Year: February 1980
Production: 17,410
Cost: ????
Location: Medina (Cleveland), OH
Link/Contact:

DATES: SAT 08/04

Manufacturer: Atari
Game/Type: Atarians / SS
Year: November, 1976
Cost: $400
Location: Joplin (Tulsa), OK
Link/Contact: joplin.craigslist.org link

OP: *THIS IS A PROJECT*..(1976) ATARIANS- This was the 1st pinball made by ATARI.. This has a great play field , and back glass..It is missing the CPU, and other boards under play field.. (hence project)..great project for re-build , or for parts..I have too many projects in front of this one , so it has to go...$ 400.00 CASH..Phone calls only please.

No...
(1976) ATARIANS-

Correct. I meant to edit that copied post before I became distracted. A good friend picked up a desirable wedgehead for me yesterday, a seller called me an hour ago to confirm he will sell me one of my grail pins, and now I am trying to get more details on that rare em in WA state.

Thanks for the kind words Pecos . I didn't realize that gopers had such large thumbs...and so many of them... I called the seller to negotiate a price, and I am interested in buying this pin. NAVL is gone for the weekend so I can't verify that they go out to this area until Monday.

If someone would really like to show me some love, go pick up that pin for me tomorrow and either:
A) Store it in your garage a couple of days and then drop at a Fastenal store, place on a pallet they provide, shrink the game, and strap it to the pallet. I would pay for the shrink, straps, gas money and something extra for your time (preferred).
B) Store it in your garage a couple of days and then I'll arrange for NAVL/Beltman to pick up (more expensive).
IF you can go there tomorrow please let me know ASAP and I will call the seller back so they can hold it for me.

Thanks!

Manufacturer: Stern
Game/Type: Flight 2000 / SS Widebody
Year: October 1980
Production: 6,301
Cost: $700
Location: Chesapeake, VA
Seller: Mark Hill
Link/Contacthttps://www.facebook.com/groups/840783619322597/permalink/1855267177874231/?sale_post_id=1855267177874231&rt=11

OP: Boots and plays. Consider it a light project. Located in Chesapeake VA 23322.

Piker. Colson would have been on the road already to pick it up.

Pecos is closer to the pin....just saying!
Pecos mapquest says that if you leave now you will arrive four hours after the sale ends tomorrow!

I followed up on this one and this is the response I got:

"The 2 pinballs are pristine and in working order. The skee ball works fine but is older.
$2500 for pinballs each. $1500 for skee ball.
It’s a tag sale so obo in the end"

The fish tales, at least, could prove interesting at that price if truly in good condition...... Too bad I'm just too far away.....

I got the same email. I was mainly interested in the Time Machine.

Seller says that he has multiple pins for sale, but the only picture is of a Bally Playboy flyer.

Manufacturer: Gottlieb
Game/Type: Spin Out / Electro-mechanical (EM)
Month/Year: July 1975
Production: 2,850
Cost: $500
Location: Providence, RI
Link/Contact: providence.craigslist.org link

OP: nice old pinball works selling as is backglass sealed looks good
gottlieb spin out
sell or trade for non workin ss game
old gun game old 50s juke

ESTATE SALE

Manufacturer: Bally
Game/Type: Mousin Around / System 11B
Year: 1989
Production: 2,009
Cost: ?????
Location: Post Falls, ID
Contact/Link: spokane.craigslist.org link

DATES: Today SAT 08/04 - SUN 08/05

Manufacturer: Chicago Coin
Game/Type: Casino / EM 4 Player
Year: June 1972
Production: Unknown
Cost: $300
Location: Cadillac, MI
Link/Contact: nmi.craigslist.org link

OP: This Pinball machine worked at one time but does not currently work and needs repaired.

Manufacturer: Williams
Game/Type: Jokerz / SS 4 Player
Month/Year: December 1988
Production: 5,403
Cost: $750
Location: Fort Worth, TX
Link/Contact: sanantonio.craigslist.org link

OP: I have a project Jokerz pinball that I got awhile back and just don't have the time to get to. All major parts are there that I know of. Comes with a new rubber kit. Machine was gone through awhile back and all switches and solenoids were working/repaired so far as I know. Some of the flaps that go to the ramps will need to be replaced. Cab is in good condition, translite is good, playfield has some wear on it on the scoring diamond( I have a new set of stickers for that). Price is $750. Deliver is available within DFW and may be available to Austin, San Antonio, or Houston as I go there often, delivery does require deposit via paypal.

Once again, this is a project, you will need to do work on it and reassemble it. The pics are of the current condition it is in.

Open to trades for a Moon Patrol.

GARAGE SALE

Manufacturer: Stern
Game/Type: NASCAR® / DMD Whitestar (modified) 4 Player
Month/Year: August 2005
Production: Unknown
Cost: ????
Location: Oak Harbor, WA
Contact/Link: skagit.craigslist.org link

DATES: TODAY SAT 08/04

Me: I also see a Whirlwind pin in the garage but it's not listed for sale.

Mine at $200. Needs a lockdown bar and mechanism. I’ve got extra legs and will need to cut a bottom board for it (it’s missing completely).

Perfect backglass, nice playfield and plastics. Pop bumper caps original, unbroken, and still have ink. OK cabinet repaint - even has webbing, but still done by an amateur.

She’ll clean up to be a pretty nice game.

Manufacturer: Gottlieb
Game/Type: Jack in the Box / EM 4 Player
Month/Year: February 1973
Production: 8,300
Cost: $700
Location: Beaumont, TX
Seller: John Cooper
Link/Contact: https://www.facebook.com/groups/173543789466215/?multi_permalinks=1094178187402766&notif_id=1533394895401147&notif_t=group_activity

OP: Will not start game,. Has new LED lamps, eos and flipper can switches, new plastics, repainted. Have manual, and oversize schematics for it. Would rather trade for another pin working or not. Make offers please. Located in Beaumont. pinball gottlieb electromechanical arcade

Relisted for $250
columbia.craigslist.org link

Sold

Manufacturer: Gottlieb
Game/Type: Countdown / SS 4 Player
Month/Year: May 1979
Production: 9,899
Cost: $500 OBO
Location: Morrisville, PA
Pinsider: freddy
Link/Contact: https://pinside.com/pinball/market/classifieds/ad/67291

OP: Count down project complete game needs restore not booting Needs mpu rebuilt or replaced previous owner never changed battery.
Play field shows wear all plastics are good would make a great players game. $500 obo

Good job Frank. I know someone else that looked at it and offered 200. They countered, he passed. Guess after getting other offers for the same, they figured out that's all it's worth.

Manufacturer: Williams
Game/Type: Blackout/ SS 4 Player
Month/Year: June 1980
Production: 7,050
Cost: $425
Location: Harrisburg, PA
Link/Contact: harrisburg.craigslist.org link

OP: Black Out pinball,,,,,,
Does power up but left flipper is "jammed midway " and won't let game reset.
3 main circuit boards have the updates.
Comes with manual and spare bumper bands, etc. Glass is nice, with money box(was set for free play).

Me: Besides the left flipper being out the 1st player display is missing two digits. That's a really nice looking Blackout playfield and backglass. The playfield is hard to find in that condition since no one ever made a repro playfield. Game play is great, but only downside is no multiball like it's cousin Firepower.

Manufacturer: Gottlieb
Game/Type: Joker Poker / SS 4 Player
Month/Year: August 1978
Production: 9,280
Cost: $300
Location: Levonia, MI
Seller: Bill Lembesis
Link/Contact: https://www.facebook.com/groups/234506863645321/

OP: Project or parts game.

The good:
Playfield looks like it will clean up well. No major 'worn down to the wood' areas I could see.

The bad:
Ugh, just see pics. All pictures here:

Backglass is a bit flaking. Cabinet corners are a bit rough.
Here's all the pics.
https://photos.app.goo.gl/puEYiQpnPbqjz62P6

Manufacturer: Bally
Game/Type: Freedom / SS 4 Player
Month/Year: August 1976
Production: 1,500
Cost: $300
Location: Leicester, MA
Seller: LB Rizzitano
Contact/Link: https://www.facebook.com/groups/299213816922644/

OP: Projest or Parts, solid cabinet I have all the Plastics.

Manufacturer: Williams
Game/Type: Firepower / SS
Year: February 1980
Production: 17,410
Cost: $800
Location: Charleston, WV
Seller: Fred Barrett
Link/Contact: https://www.facebook.com/groups/299213816922644/permalink/1018087521701933/?sale_post_id=1018087521701933&rt=11

OP: Decent cab. Playfied has wear at upper kickout. board are there but a battery was leaking.

Picking up in the morning

Congratulations! @FelixTCat.

I need another project pin like I need another hole in my head but here I go again !

If you want to bring it to York for me I won’t complain.

Join the club! We are all a bunch of sick hoarders but such is life! Better having an extra project or two then having to overpay for one when your supply runs low.