Black Hole
Gottlieb, 1981
Dogies
Bally, 1968
Four Seasons
Gottlieb, 1968
Meteor
Stern Electronics, 1979
Show Boat
Gottlieb, 1961
Strikes and Spares
Bally, 1978**This posting has expired.**
Manufacturer: Williams
Game/Type: Darling / EM 2 Player
Month/Year: September 1973
Production: 3,677
Cost: $325 OBO
Location: Kitsap County (Seattle), WA
Link/Contact: seattle.craigslist.org link
Condition: OP: "...only issue is the bonus relay is not functioning properly."
**This posting has been deleted by its author.**
Manufacturer: Williams
Game/Type: Palooka / EM AAB 1 Player
Month/Year: April 1964
Production: 700 (!)
Cost: $500 OBO
Location: Fort Langley (Vancouver), BC
Link/Contact: vancouver.craigslist.ca link
Condition: OP: "I had it working as of a couple of years ago when I had it repaired. Will need some minor service to get it working again. Otherwise in very good condition."
**This posting has expired.**
**Relisted at lower price**
**This posting has expired.**
Manufacturer: Williams
Game/Type: Casanova / EM 2 Player
Month/Year: November 1966
Production: 3,575
Cost: $400 OBO reduced to $300
Location: Inland Empire, CA
Link/Contact: inlandempire.craigslist.org link
Condition: OP: "Needs some little repairs/adjustments to operate. just lowered the price, OBO, send me your offer."
**This posting has been deleted by its author.**
Manufacturer: Williams
Game/Type: Teacher's Pet / EM 1 Player
Month/Year: December 1965
Production: 1,600
Cost: $300 OBO
Location: Grass Valley, CA
Link/Contact: goldcountry.craigslist.org link
Condition: No Pics! Unknown.
****This posting has expired.****
**Relisted at higher price**
**This posting has expired.**
Manufacturer: Williams
Game/Type: Circus Wagon / EM Woodrail 2 Player
Month/Year: August 1955
Production: Unknown
Cost: $250 Firm Relisted at $300
Location: Sonora, CA
Link/Contact: goldcountry.craigslist.org link
Condition: OP: "Very rare. Needs some tlc the back glass is cracked."
**Gone! This posting has been deleted by its author.**
Manufacturer: Williams
Game/Type: Swinger / EM 2 Player
Month/Year: December 1972
Production: 3,229
Cost: $250
Location: San Jose, CA
Link/Contact: sfbay.craigslist.org link
Condition: Playfield has wear - not nearly as good as Ryan Claytor's Swinger playfield. OP: "It os in great condition locks are fresh and lights up with no broken glass only problem is when you turn it on it makes a buzzing sound and doesnt flip the play into the slot so you can launch it."
Quoted from Pecos:Playfield has wear - not nearly as good as Ryan Claytor's Swinger playfield.
Rub it in! 
Quoted from Pecos:when you turn it on it makes a buzzing sound
Sounds like a misadjusted relay. Adjust a switch and you too can live the Claytorian dream. 
I can attest, this under-appreciated, feature-packed, brutal game is easily worth $250 when it's functioning as it should.
Here's vid of some NUTTY pop bumper action:
**This posting has been flagged for removal.** Sorry folks.
Manufacturer: Bally
Game/Type: Kiss / SS 4 Player
Month/Year: April 1978
Production: 17,000
Cost: $500
Location: Detroit, MI
Link/Contact: detroit.craigslist.org link
Condition: OP: "powers up plays no play board lites"
**Red Baron, below, This posting has been deleted by its author.**
**Comet, below, Archived**
**This posting has been deleted by its author.**
Manufacturer: Gottlieb
Game/Type: Bad Girls / SS 4 Player
Month/Year: November 1988
Production: 2,500
Cost: $475
Location: Beth Twp (Allentown), PA
Link/Contact: allentown.craigslist.org link
Condition: OP: "Project pinball machine... Will play a game but no sound bytes. Playfield has some wear and chipped plastics. Cabinet has usual nicks and blemishes. Translite has small crack and no glass. If no takers, game will be parted out on ebay. Edit...$475 . Also, reseated some connectors and the sound was working.."
Quoted from Pecos:Manufacturer: Bally
Game/Type: Kiss / SS 4 Player
Month/Year: April 1978
Production: 17,000
Cost: $500
Location: Detroit, MI
Link/Contact: detroit.craigslist.org link
Condition: OP: "powers up plays no play board lites"
Ya, I bet that was sold in minutes 
Quoted from Slim64:Ya, I bet that was sold in minutes
Ad's still up.
I think this Pinside post for a Comet in NY counts as a project...
https://pinside.com/pinball/forum/topic/for-sale-comet-williams-1985-1986
-Rob
-visit http://www.kahr.us to get my daughterboard that helps fix WPC pinball resets or for Williams system 3-7 sound board solutions
Quoted from Slim64:Ya, I bet that was sold in minutes
I even sent a email yesterday saying I would take it. That was about an hour after it was posted.
Not a peep
Manufacturer: Chicago Coin
Game/Type: Red Baron / EM 2 Player
Year: June 05, 1975
Production: Unknown
Cost: $200
Location: Baldwin, NY
Link/Contact: longisland.craigslist.org link
Condition: "playfield is worn, the rubbers are good, cabinet art is nice, back glass has some pealing paint in the red areas" worked before it went into storage
Quoted from bobnatlanta:On the fence on this one...about an hour away, and I have 3 projects going and NOWHERE to put this, but if they'd take $50, I'd haul it away for them. It's a Fast Draw, with fade all over and moisture damage on the PF, and busted plastics. It might be a box of rust, but they do claim it partially works, and I really cannot save them all. My brain hurts.
And I'm doing something wrong trying to paste the link. Atlanta CL, pin is located in Dallas, GA.
Did you get this? atlanta.craigslist.org link
Quoted from Pecos:Manufacturer: Gottlieb
Game/Type: Bad Girls / SS 4 Player
Month/Year: November 1988
Production: 2,500
Cost: $475
Location: Beth Twp (Allentown), PA
Link/Contact: allentown.craigslist.org link
Condition: OP: "Project pinball machine... Will play a game but no sound bytes. Playfield has some wear and chipped plastics. Cabinet has usual nicks and blemishes. Translite has small crack and no glass. If no takers, game will be parted out on ebay. Edit...$475 . Also, reseated some connectors and the sound was working.."
As much as I don't need another project, I would make an effort to save this from parting out.
I've never played a Bad Girls. Any thoughts on it's gameplay?
There is a $100 machine listed on EBay. Chicago coin "Top 10" in raleigh nc. Seems like a good deal.
Quoted from songofsixpence:As much as I don't need another project, I would make an effort to save this from parting out.
I've never played a Bad Girls. Any thoughts on it's gameplay?
Actually, it's a pretty fun game to play IMO. The artwork is terrible but there are some fun shots and pretty good flow going on. Different art package and it would be a pretty desirable game.
Quoted from SergioJ:Actually, it's a pretty fun game to play IMO. The artwork is terrible but there are some fun shots and pretty good flow going on. Different art package and it would be a pretty desirable game.
Emailed the seller. Hadn't heard back. Not that I can pay his asking price, but maybe I could be a buyer of last resort.
**This posting has been deleted by its author.**
I just didn't have the heart to post this in the "nice" EM thread because of the playfield wear. I played this one when it was brand new as a teen so it has a special place in my pinball book.
Manufacturer: Bally
Game/Type: Rogo / EM 4 Player
Month/Year: November 1973
Production: 3,075
Cost: $400
Location: Torrance (Los Angeles), CA
Link/Contact: losangeles.craigslist.org link
Condition: Playfield wear by the flippers. OP: "Looks nice and works great."
Welcome Hoov! 
Welcome aboard the project pin thread where we vacuum up all the good project pin deals!
Quoted from Electrocute:There is a $100 machine listed on EBay. Chicago coin "Top 10" in raleigh nc. Seems like a good deal.
Welcome Electrocute! Any game for $100 that is still standing is a good deal and this one appears to be in pretty good shape. That would make it better than a good deal. Thanks for posting it!
One of our regular posters, Ryan Claytor, has made it big in Lansing, Michigan. Don't miss this chance to meet Ryan vicariously.
Ryan Claytor interviewed by the "City Pulse" weekly newspaper:
http://lansingcitypulse.com/article-12607-The-people-issue.html?current_page=2
And interviewed in this video "Artists in Lansing" (and, no, that's not Ryan in the picture!):
Congratulations Ryan and good job!
**This posting has been deleted by its author.**
Manufacturer: Williams
Game/Type: Casanova / EM 2 Player
Month/Year: November 1966
Production: 3,575
Cost: $250
Location: Galloway, NJ
Link/Contact: southjersey.craigslist.org link
Condition: Appears to have wear on playfield. OP: "...working cond.Can see anytime."
Quoted from zacaj:Manufacturer: Chicago Coin
Game/Type: Red Baron / EM
Condition: "playfield is worn...
That's an understatement.
Quoted from Pecos:Congratulations Ryan and good job!
Thanks, Pecos. Nice of you to mention this.
**This posting has expired.**
Manufacturer: Williams
Game/Type: Time Warp / SS 4 Player
Month/Year: September 1979
Production: 8,875
Cost: $225
Location: Durham, NH
Link/Contact: boston.craigslist.org link
Condition: OP: "Needs restoration - backglass has some flaking (6-7 condition, could be touched up) - playfield is pretty good (some minor wear, easy touchup) - machine has decent boards (but does not boot)."
**This posting has expired.**
Manufacturer: Williams
Game/Type: Set Up / EM AAB 1 Player
Month/Year: December 1969
Production: Unknown
Cost: $300
Location: Hebron, CT
Link/Contact: newlondon.craigslist.org link
Condition: No Pics! OP: "Skiing scene. Needs repairs."
**This posting has been deleted by its author.**
Manufacturer: Williams
Game/Type: Star Action / EM AAB 1 Player
Month/Year: January 1974
Production: 1,155
Cost: $300
Location: Middlesex, NJ
Link/Contact: cnj.craigslist.org link
Condition: Lots of Pics! OP: "Playfield has minor wear,one side of cabinet is rough, backglass has some flaking."
Hoov - no. Not....yet. Talked with the owner, but couldn't get out to see him last weekend. Trying to arrange another appointment, if it's still available.
Quoted from bobnatlanta:Hoov - no. Not....yet. Talked with the owner, but couldn't get out to see him last weekend. Trying to arrange another appointment, if it's still available.
If you could get it chep enough it would be worth it. Good luck
Not a pinball but here are some project Ice Skee balls in California (ad was a little confusing to me - might be 2 for $500):
ebay.com link: 2 ICEBALL 10 ARCADE MACHINE SKEE BALL FUN SOLD AS IS
-Rob
-visit http://www.kahr.us to get my daughterboard that helps fix WPC pinball resets or for Williams system 3-7 sound board solutions
**This posting has been deleted by its author.**
Manufacturer: Williams
Game/Type: Spanish Eyes / EM 1 Player
Month/Year: March 1972
Production: 3,905
Cost: $175
Location: Spencer (Ithaca), NY
Link/Contact: ithaca.craigslist.org link
Condition: OP: "This machine is complete, it has had some water damage/moisture in the cabinet. It will require a number of coils to be replaced, and detailed cleaning of the switches. I decided to move this one on to someone that won't mind spending the extra time this machine will require. I have restored the mechanics in the head already before examining the cabinet. All mechanics in the head have been serviced. This would be a good project for someone that has the time for this one."
**This posting has been deleted by its author.**
Manufacturer: Gottlieb
Game/Type: Wild Life / EM 2 Player
Month/Year: November 1972
Production: 3,875
Cost: $175
Location: NH
Link/Contact: nh.craigslist.org link
Condition: Pretty rough condition overall. OP: " Machine has nice playfield. Back glass flaking. Cabinet OK. Complete machine. Needs restoration. Can be used as a part machine. parts alone are worth $175 or more"
**This posting has been deleted by its author.**
Manufacturer: Bally
Game/Type: Fireball Classic / SS 4 Player
Month/Year: December 1984
Production: 2,000
Cost: $500
Location: NH
Link/Contact: nh.craigslist.org link
Condition: No Pics! OP: "Nice pinball machine does not work"
**This posting has expired.**
Manufacturer: Williams
Game/Type: Space Mission / EM 4 Player
Month/Year: January 1976
Production: 11,652
Cost: $500
Location: Amherst, NH
Link/Contact: nh.craigslist.org link
Condition: Lots of Pics! OP: "Great shape, was working a month ago and not sure why it isn't at the moment so likely a little work needed."
**Not found - replaced with a Flying Carpet**
Manufacturer: Bally
Game/Type: Bowl-O / EM 1 Player
Month/Year: November 1969
Production: 1,050 (!)
Cost: $150
Location: Tunkhannock, PA
Link/Contact: scranton.craigslist.org link
Condition: OP: "Nice pinball machine, needs work"
Quoted from rkahr:There's a project-quality Firepower in Virginia Beach on eBay, but the price is not in the project category - $900
rkahr, I found the same Firepower on CL:
**This posting has expired.**
Manufacturer: Williams
Game/Type: Firepower / SS 4 Player
Month/Year: February, 1980
Production: 17,410
Cost: $700 OBO
Location: Virginia Beach, VA
Link/Contact: norfolk.craigslist.org link
Condition: OP: "It's been in a closed garage for years. It worked years ago and played it all the time. Since I've gone in garage last time I tried to turn it on and didn't start up like normal. It should be something very simple to fix being as it just stopped. It could even just be the batteries inside I was told. The outside of the machine is in good condition. Dusty in pics , but a light cleaning it looks new !Call or text any questions anytime ! I would love to get working and keep myself if anyone can easily repair it, but also need the money at this point and time."
Quoted from Pecos:Manufacturer: Williams
Game/Type: Spanish Eyes / EM 1 Player
Month/Year: March 1972
Production: 3,905
Cost: $175
Location: Spencer (Ithaca), NY
Link/Contact: ithaca.craigslist.org link
Condition: OP: "This machine is complete, it has had some water damage/moisture in the cabinet. It will require a number of coils to be replaced, and detailed cleaning of the switches. I decided to move this one on to someone that won't mind spending the extra time this machine will require. I have restored the mechanics in the head already before examining the cabinet. All mechanics in the head have been serviced. This would be a good project for someone that has the time for this one."
Some one pick this up, it's without a doubt one of the best EMs. Love mine so much I'm almost considering grabbing this one too on principle, but.
----------------------------------------------------------------------
Slugger, 1963 Midway: $600
Nice original condition, powers up but score motor keeps running. Will deliver to Detroit for a nominal fee.
Steve Curchin
[email protected], Leamington, Ontario, Canada
----------------------------------------------------------------------
Missed the Fast Draw, someone else snapped it up. Oh, well. He who hesitates...STILL has so many projects going he cannot walk across his gameroom AND has one sitting in the garage as well.
**This posting has expired.**
Christian Marche lovers in Colorado take heed and wake up! 
Pointy people ahead!
Manufacturer: Williams
Game/Type: Gulf Stream / EM 1 Player
Month/Year: May 1973
Production: 4,175
Manufacturer: Williams
Game/Type: Pit Stop / EM 2 Player
Month/Year: October 1968
Production: 2,002
Cost: $500 ea.
Location: Cheyenne (Ft. Collins), CO
Link/Contact: fortcollins.craigslist.org link
Condition: Unknown
**This posting has been deleted by its author.**
Manufacturer: Bally
Game/Type: Eight Ball Deluxe / SS 4 Player
Month/Year: September 1980
Production: 8,250
Cost: $350 OBO
Location: Sierra Vista, AZ
Link/Contact: sierravista.craigslist.org link
Condition: Small piece of backglass appears to be broken and missing at bottom middle. Backbox cabinet in rough shape. OP: "Plays great needs some TLC."
**Ended - No bids**
Manufacturer: Astro
Game/Type: Black Sheep Squadron / SS 4 Player
Month/Year: January 1979
Production: Unknown
Cost: $445.98 Starting Bid Ends January 15th 7:59 AM MT
Location: Bethleham, PA
Link/Contact: ebay.com link: 1979 Astro Black Sheep Squadron pinball machine solid state project
Condition: OP: "Game does not play. Upon turning it on, the solenoids lock on.
Playfield has some limited wear and some inserts are sunk
Playfield Plastics are ok
Cabinet is decent with dings, chips and scuffs.
Backglass has some missing paint and is flaking.
Electronics look clean except there is some evidence of battery corrosion on the main board.
It will need to be cleaned up and shopped ( new rubbers, bulbs, etc..)"
**Sold for $500**
Manufacturer: Bally
Game/Type: Harlem Globetrotters On Tour / SS 4 Player
Month/Year: August 1978
Production: 14,550
Cost: $500 Starting Bid Ends January 19th 7:01 PM MT
Location: Gunnison, CO
Link/Contact: ebay.com link: Harlem Globetrotters pinball machine bally
Condition: OP: "does not power up but all the boards are there. there is some wear on the play field.one spinner target is missing"
Quoted from Pecos:Manufacturer: Bally
Game/Type: Eight Ball Deluxe / SS 4 Player
Month/Year: September 1980
Production: 8,250
Cost: $350 OBO
Location: Sierra Vista, AZ
Link/Contact: sierravista.craigslist.org link
Condition: Small piece of backglass appears to be broken and missing at bottom middle. Backbox cabinet in rough shape. OP: "Plays great needs some TLC."
I'd go for this one if it was near by. I'd like a nice EBD someday.
edit: probably a scam
Manufacturer: Bally
Game/Type: Game Show / SS
Year: April, 1990
Production: 2,500
Cost: $300
Location: Newton, MA
Link/Contact: boston.craigslist.org link
Condition: "It lights up, but does not function."
If only I were closer...
Quoted from zacaj:Manufacturer: Bally
Game/Type: Game Show / SS
Year: April, 1990
Production: 2,500
Cost: $300
Location: Newton, MA
No way. That has to be a scam.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/post-project-pins-for-sale-here-cl-ebay-pinside-and-others/page/14 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Holt, MI
