Quoted from QuarterGrabber:Sorry i know this has probably been covered before. I looked through the posts here and couldn't find it. I heard i needed a seperate power supply to run my stadium lights in an old williams game ( in my case T2). The problem is the power tap in the machine is always on (has power going to it all the time) whether the machine is turned on or turned off. Is there a way i can rewire the inside of the power tap box to make the power only active when the machine is turned on? So the stadium lights only turn on when the machine is powered on? Does anyone have pics of one rewired for this? I would probably need pics to understand. Thanks so much
Yikes either your camera is WAY off or you plugged into the 220v circuit! Turn it down man or your likely to get sunburn! My guess is its the camera setting just giving you a hard time.