I was going to ask about mirror blades as well. Is the magnetic tape ultra thin and do you just put it directly on the blades? I just installed blades on lotr and I don't see room for much else.

I think the issue with the 45 degree is both could not be connected at the rear of the field and you'd end up with a visible wire at the front otherwise one way points 45 degrees down and other 45 degrees up..... Unless they made a left and right side model

I used corner guard from home depot, it comes in clear and I just put a strip of electricaL tape neatly across the top. Friends couldn't tell it didn't come in black. Corner guard costs like 3 bucks for 8 ft section and is light. I bought magnetic tape from Amazon and I'm using the 6.3v strip from australia.

I only did one and it's bright as all heck, going to switch to a controllable rgb that's dimmable, put it on both sides and dim it down to my liking.

IMAG1041 (resized).jpg

Used 30 led per meter strips instead of 60 and it came out a brightness level that was just right. These were rgb but those rgb controllers broke off quite easy, so I just soldered to the blue.

IMAG1097 (resized).jpg