Medusa
Bally, 1981You're currently viewing posts by Pinsider Swoods5688.
Click here to go back to viewing the entire thread.
Question for the group, I build my setup based off AUKraut minus the wifi piece. The problem I am having is when i hook the controller clips to the GI the lights start flashing and the board unit heats up to the point I cannot touch it. Any ideas where to look on this? i have them in my Iron Maiden
Quoted from AUKraut:Definitely sounds like you have something not wired correctly. Can you take a pic of how you have the GI driver part wired up?
This is my set up
6440E4C8-4DCB-41B0-B85E-20A2BDFF6583 (resized).jpegQuoted from AUKraut:That’s one of the reasons I removed the two blue terminals and soldered the wires on instead: to make it easier to use heat shrink. No issues with it so far.
https://www.amazon.com/gp/product/B071H5XC7C/ref=ppx_yo_dt_b_search_asin_title
If you get this kit the large ones fit over nicely if you remove the blue clamps
You're currently viewing posts by Pinsider Swoods5688.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/poor-mans-stadium-lighting?tu=Swoods5688 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Bay Village, OH