had a old sheet of mirrored acrylic laying around the shop and wanted it gone, used it up doing some side mirrors and a rear mirror.

_{Post edited by lladnip : wrong photo}pinballmirrors 026.JPGpinballmirrors 027.JPGpinballmirrors 013.JPG

pinballmirrors 010.JPG

pinballmirrors 016.JPGpinballmirrors 084.JPGpinballmirrors 088.JPG

sorry the order was mixed up on the loading- estimated time per machine 2-3 hours, est cost ex labor 10-15$, and best yet made the acrylic come up missing from the shop space.

pinballmirrors 034.JPGpinballmirrors 035.JPG

i hear ya- my ave pin cost about is about 6 or so, so to mirror everything i wantted would be an other pin or 2's cost, not to mention most of my pins are older and no one dose offer any for them anyways.

i picked up the material (sheet was 2'x4' @.125), at minards 3 years or so ago for 25-30$ or so i cant really remember- was gonna do a 1/2 bath in the basement with it but found a nice framed glass one so this sheet was setting around (in the way being moved ever so often)

ya kind varies per machine clearences, the old zodiac was super sweet as i had about 1/8 on each side of the pf- they drop all the way down to the pf supports- (center the pf nicely too)-, most other i floated above the pf. had some nice cardboard and made a template- to get a good tight fit up. also the rear mirrors if you make them they lock the side mirrors- so i did that mirror last. i pull them all out befor you rase the pf so they wont rub or be in the way

well seen the baywatch and thought its kind the same place i was some time back- ever have any q's just pm or post -its all good.