Photo: pinballphotos
  1. » Forum
  2. » Restoration
  3. » Restorations documented
  4. » Pool Sharks Restoration
(Topic ID: 98542)

Pool Sharks Restoration

By danijelP7b

9 years ago


Topic Heartbeat

Topic Stats

  • 24 posts
  • 10 Pinsiders participating
  • Latest reply 8 years ago by koen12344
  • Topic is favorited by 3 Pinsiders

You

Linked Games

Topic Gallery

View topic image gallery

image_3.jpeg
image_2.jpeg
image_1.jpeg
image.jpeg
image_1.jpeg
image.jpeg
image_3.jpeg
image_7.jpeg
image_5.jpeg
image_6.jpeg
image.jpeg
image_4.jpeg
image_2.jpeg
image_1.jpeg
fotografija (28).JPG
fotografija24_zps12478c80.jpg
0
2
2
#1 9 years ago
OP
 
CAR

danijelP7b

Pinside member

HR Zagreb

9y 23,400 101 2

Hi
Here is my Pool Sharks that I bought recently and preparing the restoration work ,pinball was purchased here in Croatia and quite long standing missing some parts as aux driver board that I bought a few days ago, two complete bumper ...I ordered some parts and now i wait for this ... background is in poor condition and would welcome for scan if someone has...

0
0
0
#2 9 years ago
OP
 
CAR

danijelP7b

Pinside member

HR Zagreb

9y 23,400 101 2

20140701_110201.jpg20140701_110201.jpgpool sharks slika 1.jpgpool sharks slika 1.jpg20140701_110212.jpg20140701_110212.jpg20140701_110201.jpg20140701_110201.jpg20140701_110150.jpg20140701_110150.jpg20140701_110127.jpg20140701_110127.jpg

0
0
0
#3 9 years ago
OP
 
CAR

danijelP7b

Pinside member

HR Zagreb

9y 23,400 101 2

fotografija24_zps12478c80.jpgfotografija24_zps12478c80.jpgfotografija16_zps7e3542cc.jpgfotografija16_zps7e3542cc.jpgfotografija12_zpse72f65c0.jpgfotografija12_zpse72f65c0.jpgfotografija11_zps32b5fe56.jpgfotografija11_zps32b5fe56.jpgfotografija11_zps32b5fe56.jpgfotografija11_zps32b5fe56.jpg

0
0
0
#4 9 years ago
OP
 
CAR

danijelP7b

Pinside member

HR Zagreb

9y 23,400 101 2

Got some new parts today from postman...

fotografija (28).JPGfotografija (28).JPG
0
0
0
#5 9 years ago
 
DBP

dbpbandit

Pinside member

11y 32,400 239

Looks like a fun project. Good luck.

0
1
1
#6 9 years ago
 
HEY

indypinhead

Pinside member

12y 119K 6,376

Pool Sharks is very fun non-multiball game.

Mine is going nowhere.

1 week later
0
2
2
#7 9 years ago
OP
 
CAR

danijelP7b

Pinside member

HR Zagreb

9y 23,400 101 2

Here are some pictures before and after cleaning playfield

image.jpegimage.jpeg image_1.jpegimage_1.jpeg image_2.jpegimage_2.jpeg image_4.jpegimage_4.jpeg image_5.jpegimage_5.jpeg image_6.jpegimage_6.jpeg image_7.jpegimage_7.jpeg image_3.jpegimage_3.jpeg
0
0
0
#8 9 years ago
 
AND

rygar

Pinside member

KP Pyongyang

10y 86,300 709 19

Always nice to see another system 11 game resurrection. It is a great system with many good games.

0
0
0
#9 9 years ago
 
KER

Kerry_Richard

Pinside+ Frequent

US Danville, CA

12y 83,900 3,024

My hats off to you to bring this cool game back to life.

0
0
0
#10 9 years ago
OP
 
CAR

danijelP7b

Pinside member

HR Zagreb

9y 23,400 101 2

Here is a Video after Playfield cleaning, and there is also electric problem with selenoid they fire self after i hit some of target insted flasher blubs...

0
0
0
#11 9 years ago
OP
 
CAR

danijelP7b

Pinside member

HR Zagreb

9y 23,400 101 2

Where could be a problem, I see that could be a problem in the relay at Aux power driver board?

0
0
0
#12 9 years ago
 
CRS

SilverUnicorn

Pinside+ Frequent

US Quakertown, PA

12y 115K 6,692 21

Wow, that playfield came out great! Nice work. Hope you can find the electrical issue. Unfortunately, I don't have any idea about that

Chris

0
0
0
#13 9 years ago
 
RON

NYP

New York Pinball

US Smithtown, NY

12y 72,800 1,382 6

I just parted one out that had cabinet damage, entire populated playfield, boards etc, not sure about shipping to Croatia but PM me and LMK if you need anything.

0
0
0
#14 9 years ago
OP
 
CAR

danijelP7b

Pinside member

HR Zagreb

9y 23,400 101 2

Yesterday I took a better look at the problem with electronics,the problem is on the CPU board because when I connect the top of the transistor Q8 (TIP 122) to ground on the frame then relay on the aux power driver board operates and switch to flash...Today I'm going to buy a new transistor and replace old Q8 and we will see what are the results...

0
2
2
#15 9 years ago
OP
 
CAR

danijelP7b

Pinside member

HR Zagreb

9y 23,400 101 2

Here I report that the problem is solved by replacing the transistor Q8 on the CPU board

10 months later
0
0
0
#16 8 years ago
OP
 
CAR

danijelP7b

Pinside member

HR Zagreb

9y 23,400 101 2

Today I finaly repair those mising 2 bumpers assy

0
0
0
#17 8 years ago
OP
 
CAR

danijelP7b

Pinside member

HR Zagreb

9y 23,400 101 2

0
1
1
#18 8 years ago
OP
 
CAR

danijelP7b

Pinside member

HR Zagreb

9y 23,400 101 2

Last night I received the latest roms and immediately built and made conversation with the German to English...

4 months later
0
2
2
#19 8 years ago
OP
 
CAR

danijelP7b

Pinside member

HR Zagreb

9y 23,400 101 2

I have finaly make a new Backglass is not 100% original image.jpegimage.jpegimage.jpegimage.jpegimage.jpegimage.jpegbut is better then nothing...

1 week later
0
0
0
#20 8 years ago
 
BJD

roffels

Pinside member

US Minneapolis, MN

10y 85,300 1,992 3 20

That looks really good! Where did you get the artwork to redo it?

1 week later
0
0
0
#21 8 years ago
OP
 
CAR

danijelP7b

Pinside member

HR Zagreb

9y 23,400 101 2

Hi, i ask one Guy to scan the Backglass in hi resolution...an then took a new glass to print it...It turned out great but the only thing is that it has no mirror effect...

0
0
0
#22 8 years ago
 
CDL

crlush

Pinside member

US Ray Twp., MI

11y 86,300 2,760 8

Your pool sharks never looked better, good job on the backglass!

0
3
3
#23 8 years ago
OP
 
CAR

danijelP7b

Pinside member

HR Zagreb

9y 23,400 101 2

Today I replace old T-moulding with new Red that I buy on ebay from US

image.jpegimage.jpeg

image_1.jpegimage_1.jpeg

image_2.jpegimage_2.jpeg

image_3.jpegimage_3.jpeg

0
0
0
#24 8 years ago
 
K R

koen12344

Pinside member

NL Schagen

10y 56,650 324 8

That turned out great! It looked so sad and vurnerable in the first pics

Promoted items from Pinside Marketplace and Pinside Shops!
$ 8.00
Tools
Flipper Nut Buddy
Nezzy's Pinball Prints
 
From: $ 64.95
Cabinet - Sound/Speakers
Headphones Station MASTER
PinSound
 
$ 29.99
Cabinet - Shooter Rods
CUE Ball Custom Shooter Rod for Bally / Williams / Stern
Pinball Shark
 
$ 29.99
Eproms
Pool Sharks Pinball - Sound / Speech Rom Set
Matt's Basement Arcade
 
$ 54.99
Cabinet - Shooter Rods
ORANGE Bally/Williams Lighted Shooter Rod Plate Cover
Lighted Pinball Mods
 
From: $ 65.00
Cabinet - Shooter Rods
8 BALL CUSTOM PINBALL SHOOTER ROD
Super Skill Shot Shop
 
$ 19.99
Eproms
Pool Sharks Pinball - CPU Rom Set
Matt's Basement Arcade
 
$ 27.00
Electronics
Williams Pinball System 11C Fuse Kit - 21 Fuses
Yorktown Arcade Supply
 
$ 18.95
Eproms
ROM POOL SHARKS -CPU
Pinballrom
 
$ 27.95
Eproms
ROM POOL SHARKS -SOUND
Pinballrom
 
$ 95.00
Cabinet - Sound/Speakers
The Pop Eliminator v2 - Bally/Williams
Pinball Mod Co.
 

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

This page was printed from https://pinside.com/pinball/forum/topic/pool-sharks-restoration and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.