You're currently viewing posts by Pinsider Davi.
Click here to go back to viewing the entire thread.
Quoted from wolfemaaan:Dayyaum. What did you use? Those look better than new
Ingredients
0.7 HP buffing machine.
Saturn flap wheels to remove ball marks, surface issues.
8" 1st stage cut wheel with black compound.
8" 2nd stage wheel with green compound.
8" 3rd stage with white compound.
Lot of time. I mean LOT.
Patience.
Dust mask.
Goggles.
Strongly depends of condition of original piece, but size is the biggest factor. For small parts, I would say 1-2 hours, for bigger parts, like ball guides, big metal ramps it takes 3-4 hours.
Quoted from jsa:I thought that white comes before green for stainless? Please tell me I haven't been doing this backwards for years.
White is after green.
Quoted from yellowghost:Bought the bullet and bought some compounds. Mine say white before green. Should I still use "white diamond "last?
[quoted image]
Usually white is polish finishing.
However, white 'diamond' is for fast cutting on hard metals.
"Made with fine abrasive powder that produces a final satin finish on chrome, stainless steel, carbon steel, brass, and aluminum. Also use to remove rust, scale and carbon deposits on metal surfaces."
Quoted from yellowghost:I noticed that using white after green seemed to go hazy again. So now I stop at green. This is piece that I've done so far. Do not own a " saturn flap" so the machine mark on the steel are still there.
[quoted image]
What kind of mop do you have for green?
Quoted from yellowghost:Not using a mop. Its a wheel thing that inserts into a corded drill. About 2 1/2" in diameter. About a inch thick. Should I use a different wheel for every color? The wheel just looks black now. The outlane trim did not turn out too good. I guess the scratches were too deep for the compounds[quoted image]
I use following sequence:
1. Saturn wheels to remove scratches, ball marks. 120, 240, 320 grits.
2. Sisal Wheel.
3. Colour Stitch Buffing Wheel.
3. 'G' Loose Fold Buffing Wheel.
One wheel, one compound only, don't mix.
20180802_190654 (resized).jpgQuoted from yellowghost:So once you get to "sisle" wheel, you apply compound to that? Or compound only on last wheel? They look pretty clean.
Yes, black for sisal, green for color stitch, white for last one.
That pic is about brand new wheels.
You're currently viewing posts by Pinsider Davi.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/polishing-tools-for-metals?tu=Davi and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.