I need a new spinner as well. Possibly take two.
You're currently viewing posts by Pinsider grbgemen.
Click here to go back to viewing the entire thread.
Quoted from look_busy:Pretty sure. Reversed it several times and replaced it with a new one. Did that with all the cables, which looked pretty junky. I want to reiterate that it worked on one side of the room and when I moved it the display went blank.
Might want to triple check the ribbon cables. In your photo listed on your ad, the left ribbon cable(J4) has the red wire on the right side of the header. The red wire of the ribbon cable should be on the same side as pin 1 of the header. I believe the J4 ribbon handles the Jackpot display.
The ribbon cable at J3 is correct at the display connection but check the other end at the MPU. The MPU side will need to be the same way(red wire towards pin 1 side). If the MPU side is currently flipped, that can cause the garbled display.
Note, the ribbon cable can be reversed(red wire to opposite side of pin 1) but the other end will need to be plugged in the same way.
You're currently viewing posts by Pinsider grbgemen.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/police-force-club-we-enforce-the-law-of-the-jungle?tu=grbgemen and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.