Hey there, new to the club with a police force I need to repair.
Anyone knows where I can find the drop targets akd shooting range decals?
Hey there, new to the club with a police force I need to repair.
Anyone knows where I can find the drop targets akd shooting range decals?
What can I do about cheap drains down the left side of the pops. Most often happening from the skillshot kickout. Need a way to bump the ball over more when it glances the long ring along the left side.
Quoted from desertT1:What can I do about cheap drains down the left side of the pops. Most often happening from the skillshot kickout. Need a way to bump the ball over more when it glances the long ring along the left side.
Adjust leg levelers to game play that suits you
Quoted from desertT1:What can I do about cheap drains down the left side of the pops. Most often happening from the skillshot kickout. Need a way to bump the ball over more when it glances the long ring along the left side.
Have you tried bending the arm of the kickout a little either which way so the ball comes out at a different angle?
Quoted from Crash:Time to replace the posts![quoted image]
They are a bit faded for sure.
Quoted from n1teowl:My ramps came in today! Can anyone tell which one is new?[quoted image]
Were you able to buy the center ramp without buying the set? If so, who is selling them?
thx
izzy
Only Starship Fantasy reproduces them because they have the Williams molds. I’m wondering if they got them from Illinois Pinball when they closed. Because of this, they only sell them as a set.
https://pinside.com/pinball/forum/topic/finally-police-force-center-lower-ramp/page/2#post-2230494
Yep, had to buy the set. I got mine from the Little Shop of Games in Florida. They came quick and look beautiful. So nice to be able to see through the center ramp to the inserts with point values. They e not cheap, but I got a good deal on the machine so thought it was worth it. This game seems to have come up in value a bit recently as well.
Quoted from Nihonmasa:Hey there, new to the club with a police force I need to repair.
Anyone knows where I can find the drop targets akd shooting range decals?
Bump
Drop target decal set: http://www.actionpinball.com/parts.php?item=PDG010
Shooting range decal: http://www.actionpinball.com/parts.php?item=31-1510-573
Looking to possibly update my Police Force game ROM. I'm currently running L2 and I know that L4 is available. Anyone know what the differences are? I'm also wondering what chip the System 11B's are using. Thanks.
Ok, probably a silly question and a long shot, but I just joined the PF club. My machine is in decent shape, everything is working, seems to have day 1 or very early mylar so the playfield is very nice. Only thing I'm missing... The topper. Does anyone have a topper they'd be willing to part with? If not, has anyone done any topper mods or topper replacements that have turned out good?
Thanks!
You might give this a try
https://www.aliexpress.com/item/32896919850.html
There's tons of options if you google police light bars. I imagine one should work for you. Sucks that the original is gone from your game, though.
Quoted from whitey:Anyone know when the reproduction playfields will be available?
Is anyone even working on this?
Quoted from Nihonmasa:I'm busy not reproducing but repainting one for a swap with mine...[quoted image]
Wow. I have my share of System 11's and Police Force art has the worst durability of the 11's I own. Mine has a ton of mylar so it still looks pretty good, but where there wasn't protection it is very worn.
Are you planning on clearcoating it when you are done?
Hello to all
Today Buthamburg received the confirmation to re-produce Police Force Playfields.
Buthamburg is officially now opening the pre-order list.
Buthamburg has also received confirmation for the following Playfields.
Black Rose
Party Zone
Hurricane
In work are the following Playfields
Bride of Pinbot
No Good Goofers
Road Show
Playfields in Shipping
F-14 Tom Cat
Alien Poker
If you wish to be on a pre-order list, then please send an email to peter at buthamburg dot de, with your postal address.
Have a nice day
Regards from Hamburg
Leon & Peter
www.buthamburg.de
Quoted from desertT1:Wow. I have my share of System 11's and Police Force art has the worst durability of the 11's I own. Mine has a ton of mylar so it still looks pretty good, but where there wasn't protection it is very worn.
Are you planning on clearcoating it when you are done?
Yep, will clearcoar it. Will actually give it to someone I know for it.
It had mylar but does look quite bad where there wasn't any. Paint layer is very thin, and coating is non-existent.
Playfield currently in the machine is even worse.
Buthamburg : good to know, if I f*** my repaint I know I will have an option
Quoted from RC_like_the_cola:You might give this a try
https://www.aliexpress.com/item/32896919850.html
There's tons of options if you google police light bars. I imagine one should work for you. Sucks that the original is gone from your game, though.
I have a topper, left n right sides
Blue pieces
Quoted from Buthamburg:Hello to all
Today Buthamburg received the confirmation to re-produce Police Force Playfields.
Buthamburg is officially now opening the pre-order list.
Buthamburg has also received confirmation for the following Playfields.
Black Rose
Party Zone
Hurricane
In work are the following Playfields
Bride of Pinbot
No Good Goofers
Road Show
Playfields in Shipping
F-14 Tom Cat
Alien Poker
If you wish to be on a pre-order list, then please send an email to peter at buthamburg dot de, with your postal address.
Have a nice day
Regards from Hamburg
Leon & Peter
www.buthamburg.de
That's awesome news Peter. will send you an email to get on the list for Police Force and Hurricane.
cheers
Trevor
I’m looking for a used police force car assemble. The motor pully brackets and all. Don’t need the police car. Using this mec for a home brew game. Anyone have an idea of where I can get one? PM me please. Found one on eBay but it’s untested. Aka. Likely broke.
B8739CD3-9D05-436A-9545-FA102D98F615 (resized).pngI replaced the single SMD bulbs in the topper with these new 2 SMD Titan fluted dome ones. Makes a big difference!
Before:
93C2A357-98BC-486D-9116-CE77E9315766 (resized).jpeg
2 SMD fluted on left, Single SMD on right.ACD31F41-F7C5-43FC-9AD1-73751856E5EC (resized).jpeg
Old on left, new on right.
676D8BEF-246A-450E-88F8-92714E51AE05 (resized).jpeg
Quoted from Crash:Would highly suggest Titan’s fluted LEDs.
Comet's faceted LEDs are pretty much identical, I'm fond of them. I think Chicago Gaming used them as OEM for MMr.
When I saw them used on Medieval Madness and Attack from Mars, I decided to use them in our games. They were originally made by Nifty with a proprietary base.
I replaced all single LED bullet style bulbs from Titan with these faceted ones. The difference is AMAZING!
5EE12320-9EEB-41E4-97A2-E21D1FE71A8C (resized).jpeg
Left half faceted, right half bullet:
CD739CF4-94CA-4962-A908-ABFB722A0097 (resized).jpeg
All LEDs replaced:
47414324-E3B2-4A01-AFCB-A872FA351845 (resized).jpegGuys when you advance the multiplier to special w/l is there in actual shot you need to make? I've owned the game for years but today I noticed when I got the special w/l light on once in awhile a new sound I never heard before would go off and I got lucky on a multiball and cradled the balls and when it started going through the high scores a new music track started. My four year old son immediately ran over as he never heard it do that. Anybody experience that?
Quoted from Crash:I printed bumper cap and target decals and covered them with Mylar for protection. They turned out great!
[quoted image]
[quoted image]
[quoted image]
looks great!
/mima
Quoted from woody76:need some help please, is there anything supposed to be plugged into J9 on the aux power board?
No.
pf (resized).PNGQuoted from GRUMPY:No.[quoted image]
Thank you, Having car (motor is good) and diverter issues, but other than that it plays pretty good. It will not let me get into the test menu so not sure whats gong on there.
had my first magnetized coil stop. Was starting to wonder if that was really a thing.
Quoted from woody76:Thank you, Having car (motor is good) and diverter issues, but other than that it plays pretty good. It will not let me get into the test menu so not sure whats gong on there.
had my first magnetized coil stop. Was starting to wonder if that was really a thing.
Bad solder joints on the motor or reverse relay.
Diverter cam needs to be cleaned or replaced.
Menu switches not working might be a bad coin door ground wire.
Quoted from GRUMPY:Bad solder joints on the motor or reverse relay.
Diverter cam needs to be cleaned or replaced.
Menu switches not working might be a bad coin door ground wire.
I will re-solder wires on motor and I put in a freshly rebuilt relay and that did not help.
rebuilt the diverter and it is now working
I will check ground on coin door
one new issue, not sure what I did
Everything on the brown power wire has stopped working, basically ALL up kickers (4 of them). Any ideas? I checked fuses.
They where working before I swapped motor relay board, fixed magnetized flipper coil stop.
Quoted from woody76:Any ideas? I checked fuses.
Fuse F-2a on the aux power supply. W-6 zero ohm resistor is bad.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/police-force-club-we-enforce-the-law-of-the-jungle/page/7 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.