I have some official take-down patrol car lights that were surplused from a police department. They would be great modded in to a pinball machine.

I have NO idea how you will add these to your machine so do not ask for tech support, if you know what you are doing, then great, buy them; if not, don't buy a set until someone who purchases a pair can rate them and post their installing procedure.

Each set is one Red and one Blue. I am only going to offer a few sets at first until I get some feedback. I am going offer a 7 day return policy (less all shipping) if you are not satisfied with the results.

Full disclosure, there seems to be about a 1 second delay on the strobe activation from when you hit them with power until they start flashing (you can hear me click the switch in the video, then observe the time till they light up). So if they are use with an existing beacon on a machine their maybe a slight lag time from when you see your beacon go off and when you see these strobes activate, I really do not know. Honestly they might look even better on a machine that is missing its beacon.

I have no idea what machine this would look the best on, but I know there have been discussions about a similar mod and different machines use of DC an AC voltage. These use 12volt DC (not AC) voltage.

They should wire in easily, with a B/W power wires and Green grounding wire.

Here is a youtube video:

Screen_Shot_2015-11-03_at_2.15.51_PM.png
IMG_2233.jpg
IMG_2239.jpg
IMG_2236.jpg
IMG_2240.jpg
IMG_2234.jpg

bump

Bump