Hi all,
Recently picked up a nice Twister. Out of the gate I messed up the DMD during transport, got that fixed by replacing the display power supply board. Game is a blast, plays great, family loves it.

I'd like get the game setup as best I can. Pictures below, noted issues below as well:

- All lights (LEDs) & sounds work great, both magnets work as intended.
- Couple of the clear plastics above the printed plastics are broken or cracked. Replacements available?
- Spinning disc works, but does not appear to spin when it's supposed to. Upon start of multiball balls drop the center of the disc and stick, but disc doesn't spin and balls just drop off. Disc appears to spin randomly at times. Is there a setting or something to help adjust when it should/should not spin?
- Fan works, I believe at correct times, only issue is that it's noisy, needs cleaning/adjustment?
- Slight wear around spinning disc, this appears to be only sign of wear on PF, anything that can be done to prevent further damage? Round cliffy?
- Batteries still in backbox, I should get these off, yes?
- On the left and right flipper lanes, the ball will sometimes get hung up on the metal loops. This happens more often when the balls go UP the lane (reverse of normal) rather than down. Common issue, recommended fix?

The above is all of the stock breakdown. Anything from a non-stock/mod perspective that the game should have to make it better?

Appreciate insight!

IMG_0139.jpg
IMG_0140.jpg
IMG_0141.jpg
IMG_0143.jpg
IMG_0144.jpg

Thanks for the feedback,
I'll definitely reach out for the cliffy and try to get a new sticker.

Bump for ideas on correcting the timing of the spinning disc?