(Topic ID: 230482)

Please confirm - Gigi - Coin Door rebuild - 2 slots - wiring

By smohr

5 years ago



Topic Stats

  • 6 posts
  • 3 Pinsiders participating
  • Latest reply 5 years ago by smohr
  • No one calls this topic a favorite

You

Linked Games

  • Gigi Gottlieb, 1963

Topic Gallery

View topic image gallery

Pinball (resized).png
Gigi Coin Door Schematic - 2 slots (resized).jpg

You're currently viewing posts by Pinsider pinhead52.
Click here to go back to viewing the entire thread.

#3 5 years ago
Quoted from smohr:

Well, there was no "meltdown". I installed and tested out the coin door wiring as noted above. I powered up the game, inserted a nickel and the game resets and balls released and game plays. I inserted a quarter and the replay reel adds 5 credits and game resets and balls released and game plays. So it seems to be good. Now, I still need to track down why the replay reel does not subtract credits when it's suppose to. I'll keep looking at the subtract replay unit circuit.
thanks

Either credit wheel zero position contact open when its not supposed to be or lead to the decrement coil removed (I just had that on a buckaroo) as a free play hack or dirty contact on start relay... Always good to test a coil with an alligator jumper, touching the non black lead with 24volts and then moving the 24v insertion at different points in the circuit until you isolate the bad/dirty contact.

First thing I'd do is jumper the non plastic zero position contact, its probably dirty/open, its supposed to be closed then opens at zero to stop the decrement. (the plastic/pvc contact on the zero switch is in the 110v start cirt., the cloth wires, is the decrement leads, one side goes directly to the lug of the decrement coil)

Promoted items from Pinside Marketplace and Pinside Shops!
From: $ 5.00
Cabinet Parts
Space Coast Pinball
 
$ 12.00
Great pinball charity
Pinball Edu

You're currently viewing posts by Pinsider pinhead52.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/please-confirm-gigi-coin-door-rebuild-2-slots-wiring?tu=pinhead52 and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.